kopia lustrzana https://github.com/meshtastic/firmware
41 wiersze
2.1 KiB
C
41 wiersze
2.1 KiB
C
// For OLED LCD
|
|
#define I2C_SDA 21
|
|
#define I2C_SCL 22
|
|
|
|
// For GPS, 'undef's not needed
|
|
#define GPS_TX_PIN 15
|
|
#define GPS_RX_PIN 12
|
|
#define PIN_GPS_EN 4
|
|
#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
|
|
|
|
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
|
|
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
|
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
|
|
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
|
|
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
|
|
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
|
|
|
|
// Radio
|
|
#define USE_SX1262 // E22-900M30S uses SX1262
|
|
#define SX126X_MAX_POWER \
|
|
22 // Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA)
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
|
|
|
|
#define SX126X_CS 18 // EBYTE module's NSS pin
|
|
#define SX126X_SCK 5 // EBYTE module's SCK pin
|
|
#define SX126X_MOSI 27 // EBYTE module's MOSI pin
|
|
#define SX126X_MISO 19 // EBYTE module's MISO pin
|
|
#define SX126X_RESET 23 // EBYTE module's NRST pin
|
|
#define SX126X_BUSY 32 // EBYTE module's BUSY pin
|
|
#define SX126X_DIO1 33 // EBYTE module's DIO1 pin
|
|
|
|
#define SX126X_TXEN 13 // Schematic connects EBYTE module's TXEN pin to MCU
|
|
#define SX126X_RXEN 14 // Schematic connects EBYTE module's RXEN pin to MCU
|
|
|
|
#define LORA_CS SX126X_CS // Compatibility with variant file configuration structure
|
|
#define LORA_SCK SX126X_SCK // Compatibility with variant file configuration structure
|
|
#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
|
|
#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure
|
|
#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure
|