kopia lustrzana https://github.com/meshtastic/firmware
43 wiersze
1.2 KiB
C
43 wiersze
1.2 KiB
C
#define LED_PIN 33
|
|
#define LED_PIN2 34
|
|
#define EXT_PWR_DETECT 35
|
|
|
|
#define BUTTON_PIN 18
|
|
|
|
#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
|
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
|
#define ADC_MULTIPLIER (4.9 * 1.045)
|
|
#define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
#define GPS_RX_PIN 5
|
|
#define GPS_TX_PIN 4
|
|
#define PIN_GPS_RESET 3
|
|
#define GPS_RESET_MODE LOW
|
|
#define PIN_GPS_PPS 1
|
|
#define PIN_GPS_EN 21
|
|
#define GPS_EN_ACTIVE HIGH
|
|
|
|
#define USE_SX1262
|
|
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
|
#define LORA_RESET 12
|
|
#define LORA_DIO1 14 // SX1262 IRQ
|
|
#define LORA_DIO2 13 // SX1262 BUSY
|
|
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
|
|
|
#define LORA_SCK 9
|
|
#define LORA_MISO 11
|
|
#define LORA_MOSI 10
|
|
#define LORA_CS 8
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|