/* Copyright (c) 2014-2015 Arduino LLC. All right reserved. Copyright (c) 2016 Sandeep Mistry All right reserved. Copyright (c) 2018, Adafruit Industries (adafruit.com) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef _VARIANT_PCA10056_ #define _VARIANT_PCA10056_ /** Master clock frequency */ #define VARIANT_MCK (64000000ul) // This file is the same as the standard pac10056 variant, except that @geeksville broke the xtal on his devboard so // he has to use a RC clock. // #define USE_LFXO // Board uses 32khz crystal for LF #define USE_LFRC // Board uses RC for LF /*---------------------------------------------------------------------------- * Headers *----------------------------------------------------------------------------*/ #include "WVariant.h" #ifdef __cplusplus extern "C" { #endif // __cplusplus // Number of pins defined in PinDescription array #define PINS_COUNT (48) #define NUM_DIGITAL_PINS (48) #define NUM_ANALOG_INPUTS (6) #define NUM_ANALOG_OUTPUTS (0) // LEDs #define PIN_LED1 (13) #define PIN_LED2 (14) #define LED_BUILTIN PIN_LED1 #define LED_CONN PIN_LED2 #define LED_RED PIN_LED1 #define LED_BLUE PIN_LED2 #define LED_STATE_ON 0 // State when LED is litted /* * Buttons */ #define PIN_BUTTON1 11 #define PIN_BUTTON2 12 #define PIN_BUTTON3 24 #define PIN_BUTTON4 25 /* * Analog pins */ #define PIN_A0 (3) #define PIN_A1 (4) #define PIN_A2 (28) #define PIN_A3 (29) #define PIN_A4 (30) #define PIN_A5 (31) #define PIN_A6 (0xff) #define PIN_A7 (0xff) static const uint8_t A0 = PIN_A0; static const uint8_t A1 = PIN_A1; static const uint8_t A2 = PIN_A2; static const uint8_t A3 = PIN_A3; static const uint8_t A4 = PIN_A4; static const uint8_t A5 = PIN_A5; static const uint8_t A6 = PIN_A6; static const uint8_t A7 = PIN_A7; #define ADC_RESOLUTION 14 // Other pins #define PIN_AREF (2) #define PIN_NFC1 (9) #define PIN_NFC2 (10) static const uint8_t AREF = PIN_AREF; /* * Serial interfaces */ // Arduino Header D0, D1 #define PIN_SERIAL1_RX (33) // P1.01 #define PIN_SERIAL1_TX (34) // P1.02 // Connected to Jlink CDC #define PIN_SERIAL2_RX (8) #define PIN_SERIAL2_TX (6) /* * SPI Interfaces */ #define SPI_INTERFACES_COUNT 1 #define PIN_SPI_MISO (46) #define PIN_SPI_MOSI (45) #define PIN_SPI_SCK (47) static const uint8_t SS = 44; static const uint8_t MOSI = PIN_SPI_MOSI; static const uint8_t MISO = PIN_SPI_MISO; static const uint8_t SCK = PIN_SPI_SCK; /* * Wire Interfaces */ #define WIRE_INTERFACES_COUNT 1 #define PIN_WIRE_SDA (26) #define PIN_WIRE_SCL (27) // QSPI Pins #define PIN_QSPI_SCK 19 #define PIN_QSPI_CS 17 #define PIN_QSPI_IO0 20 #define PIN_QSPI_IO1 21 #define PIN_QSPI_IO2 22 #define PIN_QSPI_IO3 23 // On-board QSPI Flash #define EXTERNAL_FLASH_DEVICES MX25R6435F #define EXTERNAL_FLASH_USE_QSPI // CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board #define USE_SX1262 #define SX126X_CS (32 + 8) // P1.08 #define SX126X_DIO1 (32 + 6) // P1.06 #define SX126X_BUSY (32 + 4) // P1.04 #define SX126X_RESET (0 + 3) // P0.03 #define SX126X_ANT_SW (32 + 10) // P1.10 #define SX126X_DIO2_AS_RF_SWITCH // To debug via the segger JLINK console rather than the CDC-ACM serial device // #define USE_SEGGER #ifdef __cplusplus } #endif /*---------------------------------------------------------------------------- * Arduino objects - C++ only *----------------------------------------------------------------------------*/ #endif