/* Copyright (c) 2014-2015 Arduino LLC. All right reserved. Copyright (c) 2016 Sandeep Mistry All right reserved. Copyright (c) 2018, Adafruit Industries (adafruit.com) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #pragma once /** Master clock frequency */ #define VARIANT_MCK (64000000ul) // This board does not have a 32khz crystal // #define USE_LFXO // Board uses 32khz crystal for LF #define USE_LFRC // Board uses RC for LF /*---------------------------------------------------------------------------- * Headers *----------------------------------------------------------------------------*/ #include "WVariant.h" #ifdef __cplusplus extern "C" { #endif // __cplusplus // Number of pins defined in PinDescription array #define PINS_COUNT (46) #define NUM_DIGITAL_PINS (46) #define NUM_ANALOG_INPUTS (0) #define NUM_ANALOG_OUTPUTS (0) // LEDs #define PIN_LED1 (0) #define PIN_LED2 (1) #define LED_BUILTIN PIN_LED1 #define LED_CONN PIN_LED2 #define LED_RED PIN_LED1 #define LED_GREEN PIN_LED2 // FIXME, bluefruit automatically blinks this led while connected. call AdafruitBluefruit::autoConnLed to change this. #define LED_BLUE LED_GREEN #define LED_STATE_ON 1 // State when LED is litted /* * Buttons */ #define PIN_BUTTON1 4 // center #define PIN_BUTTON2 2 #define PIN_BUTTON3 3 #define PIN_BUTTON4 5 #define PIN_BUTTON5 6 /* * Analog pins */ #define PIN_A0 (0xff) #define PIN_A1 (0xff) #define PIN_A2 (0xff) #define PIN_A3 (0xff) #define PIN_A4 (0xff) #define PIN_A5 (0xff) #define PIN_A6 (0xff) #define PIN_A7 (0xff) static const uint8_t A0 = PIN_A0; static const uint8_t A1 = PIN_A1; static const uint8_t A2 = PIN_A2; static const uint8_t A3 = PIN_A3; static const uint8_t A4 = PIN_A4; static const uint8_t A5 = PIN_A5; static const uint8_t A6 = PIN_A6; static const uint8_t A7 = PIN_A7; #define ADC_RESOLUTION 14 // Other pins #define PIN_AREF (0xff) //#define PIN_NFC1 (9) //#define PIN_NFC2 (10) static const uint8_t AREF = PIN_AREF; /* * Serial interfaces */ // GPS is on Serial1 #define PIN_SERIAL1_RX (8) #define PIN_SERIAL1_TX (9) // Connected to Jlink CDC //#define PIN_SERIAL2_RX (8) //#define PIN_SERIAL2_TX (6) /* * SPI Interfaces */ #define SPI_INTERFACES_COUNT 1 #define PIN_SPI_MISO (15) #define PIN_SPI_MOSI (13) #define PIN_SPI_SCK (12) // static const uint8_t SS = 44; static const uint8_t MOSI = PIN_SPI_MOSI; static const uint8_t MISO = PIN_SPI_MISO; static const uint8_t SCK = PIN_SPI_SCK; /* * Wire Interfaces */ #define WIRE_INTERFACES_COUNT 1 #define PIN_WIRE_SDA (32 + 2) #define PIN_WIRE_SCL (32) // CUSTOM GPIOs the SX1262 #define SX1262_CS (10) #define SX1262_DIO1 (20) #define SX1262_DIO2 (26) #define SX1262_BUSY (18) #define SX1262_RESET (17) // #define SX1262_ANT_SW (32 + 10) #define SX1262_RXEN (22) #define SX1262_TXEN (24) // ERC12864-10 LCD #define ERC12864_CS (32 + 4) #define ERC12864_RESET (32 + 6) #define ERC12864_CD (32 + 9) // L80 GPS #define L80_PPS (28) #define L80_RESET (29) #ifdef __cplusplus } #endif /*---------------------------------------------------------------------------- * Arduino objects - C++ only *----------------------------------------------------------------------------*/