Schematic shows the following:
Pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
GPS LNA SW7125DE: VCC(4), pulls up SHDN(5) through 10kR
OLED: VDD, LEDA (through diode)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump platfomio/espressif32 version to latest 6.7.0
* Fix deprecated constants
* Remove pin defs already defined by the framework
* ESP_EXT1_WAKEUP_ALL_LOW is deprecated for any target except esp32
* Enable LTO and use newlib nano flavor
* Make trunk happy
* Respect build_unflags of base env
* Recover float printfing
* Disable BLE_SM_PAIR_AUTHREQ_SC
* Distribute BLE_SM_PAIR_KEY_DIST_ID too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
* Add battery level with lookup table
now uses a lookup table to better calculate battery level of different cells
* LifePo4 and PB battery table - added voltage filter
removed delay from adc reading, added a software filter to smooth out voltage readings. In those applications battery would last hours to days, no sudden change should be expected so a less frequent voltage reading or a more aggressive filtering could be done.
Note: to speed up convergence i initiliazied the last value to the minimum voltage, there are other and better ways to init the filter.
Added LiFePO4 and PB open circuit volta battery tables,
* Fixed ADC_CTRL , Checks for valid ADC readings
line 230/386 For heltec v3 and heltec tracker a different approach was used with the ADC_CTRL pin, now is more uniform using the same code for the 3 boards.
line 236 Check if the raw reading we are getting is Valid or not, count only the valid readings. This could lead to a division by 0 (improbable) so that's why at line 258 there is a check for that.
* updated OCV values
updated value to not OCV but to very low current, almost the same anyway
* Added Alkaline/Nimh voltage curve
Added Alkaline/Nimh voltage curve for AA/AAA and similar cells
* updates variants for new capacity measurement
* trunk reformatting
* trunk fmt
* Add LTO chemistry
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* WIP
* Comment
* WIP
* TFT_CTRL
* Update platformio.ini
update to current latest version available
* Update EInkDisplay2.cpp
Is the e-ink Display a DEPG0213BN ?
* Logging
* trunk fmt
---------
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Ben Meadors