mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
4 121 Commity
37 Gałęzie
289 Tagi
157 MiB
Wykres commitów

20 Commity (0d574e35c6f20f669122c3fe449456e790fbddd0)

Autor SHA1 Wiadomość Data
GUVWAF 6d01f9aa89 Add isChannelActive() function to radio interface 2022-04-20 20:04:44 +02:00
Jm Casler ac8ba706f0 Add rssi meta data to the rf95 interface 2022-02-28 17:07:31 -08:00
Vladislav Osmanov cb42440963 fix module frequency overriding 
The `RadioInterface::freq` member was encapsulated with the `RadioInterface::getFreq()` function,
which could be overridden in child classes for some LoRa-modules.
 2021-09-13 22:13:51 +03:00
Vladislav Osmanov 1a671f2877 override new RadioLib's default current limit value (60 mA) to the previous value of 100mA 2021-09-08 14:30:52 +03:00
Kevin Hester 17a1262382 pull in new epaper lib (which required importing configuration.h everywhere 
for dumb reasons)
 2021-06-27 10:56:28 -07:00
Kevin Hester babc1b3613 include file/lineno in critical error logs 2021-04-29 09:52:15 +08:00
Kevin Hester 5fdcb72d46 cleanup applyModemConfig based on porduino testing, share with sim 2021-03-30 23:34:13 +08:00
Kevin Hester 5ceee50bb5 bug: we've always been setting gpio 0 as an input on rf95 based devices 
found because portduino provides full visibility to all IO operations
to the hw simulator.
 2021-01-02 11:23:18 +08:00
Kevin Hester 186a52172c fix #577 don't make invalid radio settings reboot the board 
instead raise a critical fault (note though: this is still not ideal
because the radio will be in an undefined state until valid settings
are used)
 2020-12-27 13:09:20 +08:00
Kevin Hester 7a4b8cde11 keep rf95 max power at 20 dBm so users don't smoke their boards 2020-10-08 10:51:31 +08:00
Kevin Hester 113859e791 increase sx1272 max power 
+#define MAX_POWER 27
 // if we use 20 we are limited to 1% duty cycle or hw might overheat.  For continuous operation set a limit of 17
+// In theory up to 27 dBm is possible, but the modules installed in most radios can cope with a max of 20.  So BIG WARNING
+// if you set power to something higher than 17 or 20 you might fry your board.
 2020-10-08 09:57:59 +08:00
Kevin Hester 7a5832ab8a SX1262: fix serious bug with detecting if we have a rx packet in progress 
Could cause hangs on the way into sleep (and enormous power consumption).
Instead of checking for rx packet length (which only changes at completion)
check if we've received preamble bits but haven't yet received a completed
packet interrupt.

notes:


wait to sleep loop problem
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Can not send yet, busyRx
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0

vs normal run
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
 2020-10-07 13:43:51 +08:00
geeksville c6d93d1a28 fix #346 limit tx power in japan 2020-09-15 18:54:50 -07:00
geeksville 7d4058f49d let users set 20 dBm if they wish 2020-09-15 18:00:21 -07:00
geeksville 31fc8fafec make default power level radio chipset specific 2020-09-15 17:55:33 -07:00
geeksville 98dfecdb79 Add external RF switch management for RF95 (needed for RAK815) 2020-07-13 13:18:32 -07:00
geeksville e12c057c31 RAK815 lora works 2020-07-10 14:37:01 -07:00
geeksville 79c61cf0e0 limit max power on rf95 to 17 (rather than 20, because 20 can... 
burn up parts if you exceed 1% duty cycle)
 2020-05-02 19:52:37 -07:00
geeksville 50213d8323 move packet handling into its own thread 2020-05-01 12:11:04 -07:00
geeksville 71fcdba017 cleanup directory structure 2020-05-01 09:04:00 -07:00