* Add battery level with lookup table
now uses a lookup table to better calculate battery level of different cells
* LifePo4 and PB battery table - added voltage filter
removed delay from adc reading, added a software filter to smooth out voltage readings. In those applications battery would last hours to days, no sudden change should be expected so a less frequent voltage reading or a more aggressive filtering could be done.
Note: to speed up convergence i initiliazied the last value to the minimum voltage, there are other and better ways to init the filter.
Added LiFePO4 and PB open circuit volta battery tables,
* Fixed ADC_CTRL , Checks for valid ADC readings
line 230/386 For heltec v3 and heltec tracker a different approach was used with the ADC_CTRL pin, now is more uniform using the same code for the 3 boards.
line 236 Check if the raw reading we are getting is Valid or not, count only the valid readings. This could lead to a division by 0 (improbable) so that's why at line 258 there is a check for that.
* updated OCV values
updated value to not OCV but to very low current, almost the same anyway
* Added Alkaline/Nimh voltage curve
Added Alkaline/Nimh voltage curve for AA/AAA and similar cells
* updates variants for new capacity measurement
* trunk reformatting
* trunk fmt
* Add LTO chemistry
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Use UINT32_MAX to indicate no configured GPS
* Refactor GPS to not probe if pins not defined
* Minor cleanups related to rework
* Use Named Constructor to clean up code
* Actually disable the GPS thread
* Don't actually disable the GPS thread
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* 6.1.0
* Update libs
* Update nrf52 while we're at it
* Remove temporary heltec platform packages
* Update install scripts to flash s3 ota partition bin
Ben Meadors