new RF95 driver is written

src/rf95/RF95Interface.cpp

@@ -0,0 +1,132 @@
+#include "RF95Interface.h"
+#include "MeshRadio.h" // kinda yucky, but we need to know which region we are in
+
+#include <configuration.h>
+
+RF95Interface::RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, SPIClass &spi)
+    : RadioLibInterface(cs, irq, rst, 0, spi)
+{
+    // FIXME - we assume devices never get destroyed
+}
+
+/// Initialise the Driver transport hardware and software.
+/// Make sure the Driver is properly configured before calling init().
+/// \return true if initialisation succeeded.
+bool RF95Interface::init()
+{
+    // FIXME, move this to main
+    SPI.begin();
+
+    applyModemConfig();
+    if (power > 20) // This chip has lower power limits than some
+        power = 20;
+
+    int res;
+    /**
+     * We do a nasty check on freq range to figure our RFM96 vs RFM95
+     */
+    if (CH0 < 500.0) {
+        auto dev = new RFM96(&module);
+        lora = dev;
+        res = dev->begin(freq, bw, sf, cr, syncWord, power, currentLimit, preambleLength);
+    } else {
+        auto dev = new RFM95(&module);
+        lora = dev;
+        res = dev->begin(freq, bw, sf, cr, syncWord, power, currentLimit, preambleLength);
+    }
+
+    DEBUG_MSG("LORA init result %d\n", res);
+
+    if (res == ERR_NONE)
+        res = lora->setCRC(SX126X_LORA_CRC_ON);
+
+    if (res == ERR_NONE)
+        startReceive(); // start receiving
+
+    return res == ERR_NONE;
+}
+
+bool RF95Interface::reconfigure()
+{
+    applyModemConfig();
+
+    // set mode to standby
+    setStandby();
+
+    // configure publicly accessible settings
+    int err = lora->setSpreadingFactor(sf);
+    assert(err == ERR_NONE);
+
+    err = lora->setBandwidth(bw);
+    assert(err == ERR_NONE);
+
+    err = lora->setCodingRate(cr);
+    assert(err == ERR_NONE);
+
+    err = lora->setSyncWord(syncWord);
+    assert(err == ERR_NONE);
+
+    err = lora->setCurrentLimit(currentLimit);
+    assert(err == ERR_NONE);
+
+    err = lora->setPreambleLength(preambleLength);
+    assert(err == ERR_NONE);
+
+    err = lora->setFrequency(freq);
+    assert(err == ERR_NONE);
+
+    if (power > 20) // This chip has lower power limits than some
+        power = 20;
+    err = lora->setOutputPower(power);
+    assert(err == ERR_NONE);
+
+    startReceive(); // restart receiving
+
+    return ERR_NONE;
+}
+
+void RF95Interface::setStandby()
+{
+    int err = lora->standby();
+    assert(err == ERR_NONE);
+
+    isReceiving = false; // If we were receiving, not any more
+    completeSending();   // If we were sending, not anymore
+    disableInterrupt();
+}
+
+void RF95Interface::startReceive()
+{
+    setStandby();
+    int err = lora->startReceive();
+    assert(err == ERR_NONE);
+
+    isReceiving = true;
+
+    // Must be done AFTER, starting transmit, because startTransmit clears (possibly stale) interrupt pending register bits
+    enableInterrupt(isrRxLevel0);
+}
+
+/** Could we send right now (i.e. either not actively receving or transmitting)? */
+bool RF95Interface::canSendImmediately()
+{
+    // We wait _if_ we are partially though receiving a packet (rather than just merely waiting for one).
+    // To do otherwise would be doubly bad because not only would we drop the packet that was on the way in,
+    // we almost certainly guarantee no one outside will like the packet we are sending.
+    bool busyTx = sendingPacket != NULL;
+    bool busyRx = isReceiving && lora->getPacketLength() > 0;
+
+    if (busyTx || busyRx)
+        DEBUG_MSG("Can not set now, busyTx=%d, busyRx=%d\n", busyTx, busyRx);
+
+    return !busyTx && !busyRx;
+}
+
+bool RF95Interface::sleep()
+{
+    // put chipset into sleep mode
+    disableInterrupt();
+    lora->sleep();
+
+    return true;
+}

src/rf95/RF95Interface.h

@@ -0,0 +1,50 @@
+#pragma once
+
+#include "MeshRadio.h" // kinda yucky, but we need to know which region we are in
+#include "RadioLibInterface.h"
+
+/**
+ * Our new not radiohead adapter for RF95 style radios
+ */
+class RF95Interface : public RadioLibInterface
+{
+    SX1278 *lora; // Either a RFM95 or RFM96 depending on what was stuffed on this board
+
+  public:
+    RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, SPIClass &spi);
+
+    /// Initialise the Driver transport hardware and software.
+    /// Make sure the Driver is properly configured before calling init().
+    /// \return true if initialisation succeeded.
+    virtual bool init();
+
+    /// Apply any radio provisioning changes
+    /// Make sure the Driver is properly configured before calling init().
+    /// \return true if initialisation succeeded.
+    virtual bool reconfigure();
+
+    /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
+    virtual bool sleep();
+
+  protected:
+    /**
+     * Glue functions called from ISR land
+     */
+    virtual void INTERRUPT_ATTR disableInterrupt() { lora->clearDio0Action(); }
+
+    /**
+     * Enable a particular ISR callback glue function
+     */
+    virtual void enableInterrupt(void (*callback)()) { lora->setDio0Action(callback); }
+
+    /** Could we send right now (i.e. either not actively receiving or transmitting)? */
+    virtual bool canSendImmediately();
+
+    /**
+     * Start waiting to receive a message
+     */
+    virtual void startReceive();
+
+  private:
+    void setStandby();
+};

src/rf95/RadioLibInterface.cpp

@@ -11,7 +11,7 @@ static SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
 RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
                                      SPIClass &spi, PhysicalLayer *_iface)
-    : module(cs, irq, rst, busy, spi, spiSettings), iface(*_iface)
+    : module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
 {
     assert(!instance); // We assume only one for now
     instance = this;
@@ -156,9 +156,9 @@ void RadioLibInterface::handleReceiveInterrupt()
     DEBUG_MSG("handling lora RX interrupt\n");
 
     // read the number of actually received bytes
-    size_t length = iface.getPacketLength();
+    size_t length = iface->getPacketLength();
 
-    int state = iface.readData(radiobuf, length);
+    int state = iface->readData(radiobuf, length);
     if (state != ERR_NONE) {
         DEBUG_MSG("ignoring received packet due to error=%d\n", state);
         rxBad++;
@@ -207,7 +207,7 @@ void RadioLibInterface::startSend(MeshPacket *txp)
 {
     size_t numbytes = beginSending(txp);
 
-    int res = iface.startTransmit(radiobuf, numbytes);
+    int res = iface->startTransmit(radiobuf, numbytes);
     assert(res == ERR_NONE);
 
     // Must be done AFTER, starting transmit, because startTransmit clears (possibly stale) interrupt pending register bits

src/rf95/RadioLibInterface.h

@@ -52,7 +52,7 @@ class RadioLibInterface : public RadioInterface
     /**
      * provides lowest common denominator RadioLib API
      */
-    PhysicalLayer &iface;
+    PhysicalLayer *iface;
 
     /// are _trying_ to receive a packet currently (note - we might just be waiting for one)
     bool isReceiving;
@@ -69,7 +69,7 @@ class RadioLibInterface : public RadioInterface
 
   public:
     RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi,
-                      PhysicalLayer *iface);
+                      PhysicalLayer *iface = NULL);
 
     virtual ErrorCode send(MeshPacket *p);
 

src/rf95/SX1262Interface.cpp

@@ -109,13 +109,11 @@ bool SX1262Interface::canSendImmediately()
     return !busyTx && !busyRx;
 }
 
-
-
 bool SX1262Interface::sleep()
 {
-    // we no longer care about interrupts from this device
-    // prepareDeepSleep();
+    // put chipset into sleep mode
+    disableInterrupt();
+    lora.sleep();
 
-    // FIXME - put chipset into sleep mode
-    return false;
+    return true;
 }

src/rf95/SX1262Interface.h

@@ -2,6 +2,9 @@
 
 #include "RadioLibInterface.h"
 
+/**
+ * Our adapter for SX1262 radios
+ */
 class SX1262Interface : public RadioLibInterface
 {
     SX1262 lora;