diff --git a/boards/CDEBYTE_EoRa-S3.json b/boards/CDEBYTE_EoRa-S3.json
new file mode 100644
index 000000000..9ecee3c9f
--- /dev/null
+++ b/boards/CDEBYTE_EoRa-S3.json
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}
diff --git a/src/platform/esp32/architecture.h b/src/platform/esp32/architecture.h
index 6855265ac..15e437bb5 100644
--- a/src/platform/esp32/architecture.h
+++ b/src/platform/esp32/architecture.h
@@ -117,6 +117,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_WIRELESS_PAPER
 #elif defined(TLORA_T3S3_V1)
 #define HW_VENDOR meshtastic_HardwareModel_TLORA_T3_S3
+#elif defined(CDEBYTE_ELORA_S3)
+#define HW_VENDOR meshtastic_HardwareModel_CDEBYTE_ELORA_S3
 #elif defined(BETAFPV_2400_TX)
 #define HW_VENDOR meshtastic_HardwareModel_BETAFPV_2400_TX
 #elif defined(NANO_G1_EXPLORER)
diff --git a/variants/CDEBYTE_EoRa-S3/pins_arduino.h b/variants/CDEBYTE_EoRa-S3/pins_arduino.h
new file mode 100644
index 000000000..38a9103f0
--- /dev/null
+++ b/variants/CDEBYTE_EoRa-S3/pins_arduino.h
@@ -0,0 +1,37 @@
+// Need this file for ESP32-S3
+// No need to modify this file, changes to pins imported from variant.h
+// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include <variant.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS 48
+#define NUM_ANALOG_INPUTS 20
+
+#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
+#define digitalPinToInterrupt(p)                                                                                                 \
+    (((p) < 48) ? (p) : -1) // Maybe it should be <= 48 but this is from a trustworthy source so it is likely correct
+#define digitalPinHasPWM(p) (p < 46)
+
+// Serial
+static const uint8_t TX = UART_TX;
+static const uint8_t RX = UART_RX;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = LORA_CS;
+static const uint8_t SCK = LORA_SCK;
+static const uint8_t MOSI = LORA_MOSI;
+static const uint8_t MISO = LORA_MISO;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SCL = I2C_SCL;
+static const uint8_t SDA = I2C_SDA;
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/CDEBYTE_EoRa-S3/platformio.ini b/variants/CDEBYTE_EoRa-S3/platformio.ini
new file mode 100644
index 000000000..1ff54de88
--- /dev/null
+++ b/variants/CDEBYTE_EoRa-S3/platformio.ini
@@ -0,0 +1,8 @@
+[env:CDEBYTE_EoRa-S3]
+extends = esp32s3_base
+board = CDEBYTE_EoRa-S3
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D CDEBYTE_EORA_S3
+  -I variants/CDEBYTE_EoRa-S3
+  -D GPS_POWER_TOGGLE
diff --git a/variants/CDEBYTE_EoRa-S3/variant.h b/variants/CDEBYTE_EoRa-S3/variant.h
new file mode 100644
index 000000000..5da99667b
--- /dev/null
+++ b/variants/CDEBYTE_EoRa-S3/variant.h
@@ -0,0 +1,63 @@
+// LED - status indication
+#define LED_PIN 37
+
+// Button - user interface
+#define BUTTON_PIN 0 // This is the BOOT button, and it has its own pull-up resistor
+
+// SD card - TODO: test, currently untested, copied from T3S3 variant
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+// TODO: rename this to make this SD-card specific
+#define SPI_CS 13
+#define SPI_SCK 14
+#define SPI_MOSI 11
+#define SPI_MISO 2
+// FIXME: there are two other SPI pins that are not defined here
+// Compatibility
+#define SDCARD_CS SPI_CS
+
+// Battery voltage monitoring - TODO: test, currently untested, copied from T3S3 variant
+#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_MULTIPLIER                                                                                                           \
+    2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried over from
+         // the T3S3, test to see if the undervoltage correction is needed.
+
+// Display - OLED connected via I2C by the default hardware configuration
+#define HAS_SCREEN 1
+#define USE_SSD1306
+#define I2C_SCL 17
+#define I2C_SDA 18
+
+// UART - The 1mm JST SH connector closest to the USB-C port
+#define UART_TX 43
+#define UART_RX 44
+
+// Peripheral I2C - The 1mm JST SH connector furthest from the USB-C port which follows Adafruit connection standard. There are no
+// pull-up resistors on these lines, the downstream device needs to include them. TODO: test, currently untested
+#define I2C_SCL1 21
+#define I2C_SDA1 10
+
+// Radio
+#define USE_SX1262 // CDEBYTE EoRa-S3-900TB <- CDEBYTE E22-900MM22S <- Semtech SX1262
+#define USE_SX1268 // CDEBYTE EoRa-S3-400TB <- CDEBYTE E22-400MM22S <- Semtech SX1268
+
+#define SX126X_CS 7
+#define LORA_SCK 5
+#define LORA_MOSI 6
+#define LORA_MISO 3
+#define SX126X_RESET 8
+#define SX126X_BUSY 34
+#define SX126X_DIO1 33
+
+#define SX126X_DIO2_AS_RF_SWITCH // All switching is performed with DIO2, it is automatically inverted using circuitry.
+// CDEBYTE EoRa-S3 uses an XTAL, thus we do not need DIO3 as TCXO voltage reference. Don't define SX126X_DIO3_TCXO_VOLTAGE for
+// simplicity rather than defining it as 0.
+#define SX126X_MAX_POWER                                                                                                         \
+    22 // E22-900MM22S and E22-400MM22S have a raw SX1262 or SX1268 respsectively, they are rated to output up and including 22
+       // dBm out of their SX126x IC.
+
+// Compatibility with old variant.h file structure - FIXME: this should be done in the respective radio interface modules to clean
+// up all variants.
+#define LORA_CS SX126X_CS
+#define LORA_DIO1 SX126X_DIO1
\ No newline at end of file