Add USB detection to RAK4631 based boards. (#2956)

* Add support for the rak10701 board, no touch

* Moved tftblack fillin and changed teh src flags

* Added rak10701 to platformio.ini

* Add USB detection to RAK4631 units.

* Eliminate spurious symbol in comment field.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

src/Power.cpp

@@ -19,6 +19,11 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
+
 #ifdef DEBUG_HEAP_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -460,10 +465,25 @@ void Power::readPowerStatus()
             }
         }
 
+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+            NRF_USB = OptFalse;
+        } else {
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+            NRF_USB = OptTrue;
+        }
+#endif
         // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);

variants/rak10701/variant.h

@@ -234,6 +234,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
+// Testing USB detection
+#define NRF_APM
+
 // enables 3.3V periphery like GPS or IO Module
 #define PIN_3V3_EN (34)
 

variants/rak4631/variant.h

@@ -215,6 +215,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
+// Testing USB detection
+#define NRF_APM
+
 // enables 3.3V periphery like GPS or IO Module
 #define PIN_3V3_EN (34)
 

variants/rak4631_epaper/variant.h

@@ -209,6 +209,9 @@ static const uint8_t SCK = PIN_SPI_SCK;
 // RAK12002 RTC Module
 #define RV3028_RTC (uint8_t)0b1010010
 
+// Testing USB detection
+#define NRF_APM
+
 // Battery
 // The battery sense is hooked to pin A0 (5)
 #define BATTERY_PIN PIN_A0
@@ -241,4 +244,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/rak4631_epaper_onrxtx/variant.h

@@ -84,6 +84,9 @@ static const uint8_t AREF = PIN_AREF;
 #define PIN_SERIAL2_RX (-1)
 #define PIN_SERIAL2_TX (-1)
 
+// Testing USB detection
+#define NRF_APM
+
 /*
  * SPI Interfaces
  */
@@ -212,4 +215,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif