mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Tidy Wireless Paper variant files (#4238) 

* Quick tidy of pins_arduino.h
Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480)

* Tidy variant.h

* Change deprecated ADC attenuation parameter
From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12`
pull/4243/head
todd-herbert 2024-07-07 05:41:29 +12:00 zatwierdzone przez GitHub
rodzic 8be378c227
commit c3d3dfa8c8
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: B5690EEEBB952194
4 zmienionych plików z 26 dodań i 46 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

8
variants/heltec_wireless_paper/pins_arduino.h
Wyświetl plik

@ -3,11 +3,7 @@
#include <stdint.h>
#define WIFI_Kit_32 true
#define DISPLAY_HEIGHT 64
#define DISPLAY_WIDTH 128
static const uint8_t LED_BUILTIN = 35;
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
@ -65,6 +61,6 @@ static const uint8_t LED = 18;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
static const uint8_t DIO1 = 14;
#endif /* Pins_Arduino_h */

28
variants/heltec_wireless_paper/variant.h
Wyświetl plik

@ -1,14 +1,12 @@
#define LED_PIN 18
#define BUTTON_PIN 0
// Enable bus for external periherals
// I2C
#define I2C_SDA SDA
#define I2C_SCL SCL
// Display (E-Ink)
#define USE_EINK
/*
* eink display pins
*/
#define PIN_EINK_CS 4
#define PIN_EINK_BUSY 7
#define PIN_EINK_DC 5
@ -16,32 +14,28 @@
#define PIN_EINK_SCLK 3
#define PIN_EINK_MOSI 2
/*
* SPI interfaces
*/
// SPI
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO 10 // MISO
#define PIN_SPI_MOSI 11 // MOSI
#define PIN_SPI_SCK 9 // SCK
#define PIN_SPI_MISO 10 // MISO P0.17
#define PIN_SPI_MOSI 11 // MOSI P0.15
#define PIN_SPI_SCK 9 // SCK P0.13
#define VEXT_ENABLE 45 // active low, powers the oled display and the lora antenna boost
#define BUTTON_PIN 0
// Power
#define VEXT_ENABLE 45 // Active low, powers the E-Ink display
#define ADC_CTRL 19
#define BATTERY_PIN 20
#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
#define ADC_MULTIPLIER 2 // Voltage divider is roughly 1:1
#define BAT_MEASURE_ADC_UNIT 2 // Use ADC2
#define ADC_ATTENUATION ADC_ATTEN_DB_11 // Voltage divider output is quite high
#define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
// LoRa
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_SCK 9
#define LORA_MISO 11

8
variants/heltec_wireless_paper_v1/pins_arduino.h
Wyświetl plik

@ -3,11 +3,7 @@
#include <stdint.h>
#define WIFI_Kit_32 true
#define DISPLAY_HEIGHT 64
#define DISPLAY_WIDTH 128
static const uint8_t LED_BUILTIN = 35;
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
@ -65,6 +61,6 @@ static const uint8_t LED = 18;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
static const uint8_t DIO1 = 14;
#endif /* Pins_Arduino_h */

28
variants/heltec_wireless_paper_v1/variant.h
Wyświetl plik

@ -1,14 +1,12 @@
#define LED_PIN 18
#define BUTTON_PIN 0
// Enable bus for external periherals
// I2C
#define I2C_SDA SDA
#define I2C_SCL SCL
// Display (E-Ink)
#define USE_EINK
/*
* eink display pins
*/
#define PIN_EINK_CS 4
#define PIN_EINK_BUSY 7
#define PIN_EINK_DC 5
@ -16,32 +14,28 @@
#define PIN_EINK_SCLK 3
#define PIN_EINK_MOSI 2
/*
* SPI interfaces
*/
// SPI
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO 10 // MISO
#define PIN_SPI_MOSI 11 // MOSI
#define PIN_SPI_SCK 9 // SCK
#define PIN_SPI_MISO 10 // MISO P0.17
#define PIN_SPI_MOSI 11 // MOSI P0.15
#define PIN_SPI_SCK 9 // SCK P0.13
#define VEXT_ENABLE 45 // active low, powers the oled display and the lora antenna boost
#define BUTTON_PIN 0
// Power
#define VEXT_ENABLE 45 // Active low, powers the E-Ink display
#define ADC_CTRL 19
#define BATTERY_PIN 20
#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
#define ADC_MULTIPLIER 2 // Voltage divider is roughly 1:1
#define BAT_MEASURE_ADC_UNIT 2 // Use ADC2
#define ADC_ATTENUATION ADC_ATTEN_DB_11 // Voltage divider output is quite high
#define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
// LoRa
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_SCK 9
#define LORA_MISO 11