update pin definitions

update toolchain
enable telemetry
fix compilation

arch/esp32/esp32c6.ini

@@ -1,18 +1,12 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#Arduino/IDF5
+platform = https://github.com/Jason2866/platform-espressif32.git#d8d8f1bcf4bfcae82db2bef70a2b0014f1d2bc13
 build_flags =
   ${arduino_base.build_flags}
   -Wall
   -Wextra
   -Isrc/platform/esp32
   -std=c++11
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial
-  -DCONFIG_BT_NIMBLE_ENABLED
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -24,7 +18,6 @@ build_flags =
   -DHAS_BLUETOOTH=0
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 lib_deps =
   ${arduino_base.lib_deps}
@@ -37,7 +30,7 @@ lib_deps =
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 
 
-monitor_speed = 115200
+monitor_speed = 460800
 monitor_filters = esp32_c3_exception_decoder
 
 lib_ignore =

platformio.ini

@@ -152,13 +152,11 @@ lib_deps =
   emotibit/EmotiBit MLX90632@^1.0.8
   dfrobot/DFRobot_RTU@^1.0.3
 
-
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   https://github.com/KodinLanewave/INA3221@^1.0.0
   lewisxhe/SensorLib@0.2.0
   mprograms/QMC5883LCompass@^1.2.0
   
-
   https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
   https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

src/Power.cpp

@@ -136,6 +136,7 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
+// warning: 'void adcEnable()' defined but not used [-Wunused-function]
 static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
@@ -149,6 +150,7 @@ static void adcEnable()
 #endif
 }
 
+// warning: 'void adcDisable()' defined but not used [-Wunused-function]
 static void adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read

src/sleep.cpp

@@ -17,6 +17,7 @@
 #include "target_specific.h"
 
 #ifdef ARCH_ESP32
+// "esp_pm_config_esp32_t is deprecated, please include esp_pm.h and use esp_pm_config_t instead"
 #include "esp32/pm.h"
 #include "esp_pm.h"
 #if HAS_WIFI

variants/tlora_c6/platformio.ini

@@ -2,4 +2,10 @@
 extends = esp32c6_base
 board = esp32-c6-devkitm-1
 build_flags = 
-  ${esp32c6_base.build_flags} -D PRIVATE_HW -D TLORA_C6 -I variants/tlora_c6
+  ${esp32c6_base.build_flags}
+  -D PRIVATE_HW
+  -D TLORA_C6
+  -I variants/tlora_c6
+  -DARDUINO_USB_CDC_ON_BOOT=1
+  -DARDUINO_USB_MODE=1
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/esp32c3"

variants/tlora_c6/variant.h

@@ -1,16 +1,22 @@
-#define I2C_SDA 4 // I2C pins for this board
-#define I2C_SCL 15
-
-#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
+#define I2C_SDA 8 // I2C pins for this board
+#define I2C_SCL 9
 
 #define VEXT_ENABLE 21    // active low, powers the oled display and the lora antenna boost
-#define LED_PIN 2      // If defined we will blink this LED
-#define BUTTON_PIN 0   // If defined, this will be used for user button presses
-#define BUTTON_NEED_PULLUP
+#define LED_PIN 7         // If defined we will blink this LED
 #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
 
-#define USE_RF95
-#define LORA_DIO0 26 // a No connect on the SX1262 module
-#define LORA_RESET 14
-#define LORA_DIO1 33 // Must be manually wired: https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-3/18436
-#define LORA_DIO2 32 // Not really used
+#define USE_SX1262
+#define LORA_SCK 6
+#define LORA_MISO 1
+#define LORA_MOSI 0
+#define LORA_CS 18
+#define LORA_RESET 21
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 23
+#define SX126X_DIO2 20
+#define SX126X_BUSY 22
+#define SX126X_RESET LORA_RESET
+#define SX126X_RXEN 15
+#define SX126X_TXEN 14
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8