Create lora-raxda-rock2f-starter-edition-hat.yaml (#6192)

* Create lora-raxda-rock2f-starter-edition-hat.yaml

* Update lora-raxda-rock2f-starter-edition-hat.yaml

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -0,0 +1,49 @@
+Lora:
+
+### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
+### https://github.com/markbirss/rock-2f
+### https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+### https://github.com/radxa-pkg/radxa-overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3528-spi0-cs1-spidev.dts
+### Require install of https://github.com/radxa-pkg/radxa-overlays and rk3528-spi0-cs1-spidev.dtbo copied to /boot/dtb/rockchip/overlay and enabled 
+### in  /boot/armbianEnv.txt - overlays=rk3528-spi0-cs1-spidev
+### The Radxa Rock 2F employs multiple gpio chips.
+### Each gpio pin must be unique, but can be assigned to a specific gpio chip and line.
+### In case solely a no. is given, the default gpio chip and pin == line will be employed.
+###
+  Module: sx1262  # Radxa Rock 2F + Starter Edition SX1262 HAT by Mark Birss
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: 1.8
+  spidev: spidev0.1
+  CS:             # NSS     PIN_24 -> chip 4, line 14
+    pin: 24
+    gpiochip: 4
+    line: 14
+  SCK:            # SCK     PIN_23 -> chip 4, line 12
+    pin: 23
+    gpiochip: 4
+    line: 12
+  Busy:           # BUSY    PIN_7 -> chip 4, line 6
+    pin: 7
+    gpiochip: 4
+    line: 6
+  MOSI:           # MOSI    PIN_19 -> chip 4, line 10
+    pin: 19
+    gpiochip: 4
+    line: 10
+  MISO:           # MISO    PIN_21 -> chip 4, line 11
+    pin: 21
+    gpiochip: 4
+    line: 11
+  Reset:          # NRST    PIN_12 -> chip 1, line 13
+    pin: 12
+    gpiochip: 1
+    line: 13
+  IRQ:            # DIO1    PIN_15 -> chip 4, line 22
+    pin: 15
+    gpiochip: 4
+    line: 22
+#  RXen:           # RXEN    PIN_22 -> chip 3!, line 17
+#    pin: 22
+#    gpiochip: 3
+#    line: 17
+#  TXen: RADIOLIB_NC # TXEN   no PIN, no line, fallback to default gpio chip