mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Rearranging deck chairs, 900M22S working, 30S not

pull/1878/head
code8buster 2022-10-30 22:27:16 -04:00
rodzic afafb3ba32
commit 309a3d5396
1 zmienionych plików z 26 dodań i 25 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

51
variants/diy/dr-dev/variant.h
Wyświetl plik

@ -1,47 +1,54 @@
// For OLED LCD
#define I2C_SDA 21
#define I2C_SCL 22
#define HAS_WIRE 0
#define HAS_SCREEN 0
#define I2C_SDA 4
#define I2C_SCL 5
// GPS
#undef GPS_RX_PIN
#define GPS_RX_PIN NOT_A_PIN
#undef WANT_GPS
#define HAS_GPS 0
#define BUTTON_PIN 2 // The middle button GPIO on the T-Beam
#define BUTTON_PIN 13 // The middle button GPIO on the T-Beam
#define BUTTON_NEED_PULLUP
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LORA_DIO0 -1 // a No connect on the SX1262/SX1268 module
#define LORA_RESET -1 // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO1 27 // IRQ for SX1262/SX1268 (IO26 FOR 22S)
#define LORA_DIO2 NOT_A_PIN // BUSY for SX1262/SX1268
#define LORA_DIO3 // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
#define LORA_RESET NOT_A_PIN // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
// Before powering off, set TXEN、RXEN as low level.
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_TXEN -1 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
/* --PINS FOR THE 900M22S
#undef RF95_SCK
#define RF95_SCK 18
#undef RF95_MISO
#define RF95_MISO 19
#undef RF95_MOSI
#define RF95_MOSI 23
// --PINS FOR THE 900M22S
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#undef RF95_NSS
#define RF95_NSS 16
*/
#define SX126X_BUSY 22
// PINS FOR THE 900M30S
#undef RF95_SCK
#define RF95_SCK 18
#undef RF95_MISO
#define RF95_MISO 19
#undef RF95_MOSI
#define RF95_MOSI 23
/*
#define LORA_DIO1 27 // IRQ for SX1262/SX1268
#define LORA_RXEN 21 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_DIO2 35 // BUSY for SX1262/SX1268
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#undef RF95_NSS
#define RF95_NSS 33
#define SX126X_BUSY 35
*/
// RX/TX for RFM95/SX127x
#define RF95_RXEN LORA_RXEN
@ -51,7 +58,6 @@
// common pinouts for SX126X modules
#define SX126X_CS 33
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 35
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN LORA_RXEN
#define SX126X_TXEN LORA_TXEN
@ -61,9 +67,4 @@
#define USE_SX1262
#define USE_SX1268
#define USE_LLCC68
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
// (which is the default for the sx1262interface code)
#define SX126X_E22
#endif