Fix STM32WL TCXO setting; enable logs and modules (#6063)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

arch/stm32/stm32.ini

@@ -11,9 +11,15 @@ build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_MINIMIZE_BUILD
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+  -DMESHTASTIC_EXCLUDE_INPUTBROKER
+  -DMESHTASTIC_EXCLUDE_I2C
+  -DMESHTASTIC_EXCLUDE_POWERMON
+  -DMESHTASTIC_EXCLUDE_SCREEN
+  -DMESHTASTIC_EXCLUDE_MQTT
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-  -DDEBUG_MUTE
 ;  -DVECT_TAB_OFFSET=0x08000000
   -DconfigUSE_CMSIS_RTOS_V2=1
 ;  -DSPI_MODE_0=SPI_MODE0

src/mesh/STM32WLE5JCInterface.cpp

@@ -18,6 +18,9 @@ bool STM32WLE5JCInterface::init()
 {
     RadioLibInterface::init();
 
+    // https://github.com/Seeed-Studio/LoRaWan-E5-Node/blob/main/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c
+    setTCXOVoltage(1.7);
+
     lora.setRfSwitchTable(rfswitch_pins, rfswitch_table);
 
     if (power > STM32WLx_MAX_POWER) // This chip has lower power limits than some
@@ -39,4 +42,4 @@ bool STM32WLE5JCInterface::init()
     return res == RADIOLIB_ERR_NONE;
 }
 
-#endif // ARCH_STM32WL
+#endif // ARCH_STM32WL

src/mesh/STM32WLE5JCInterface.h

@@ -16,9 +16,6 @@ class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>
     virtual bool init() override;
 };
 
-// https://github.com/Seeed-Studio/LoRaWan-E5-Node/blob/main/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c
-static const float tcxoVoltage = 1.7;
-
 /* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
  * Wio-E5 module ONLY transmits through RFO_HP
  * Receive: PA4=1, PA5=0