inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios
This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the chat.
Prebuilt binaries for the supported radios are available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases). Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
4. If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
5. If there is an error, download the drivers [here](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), then unzip and run the Installer application.
10. Debug messages sent from the Meshtastic device can be viewed with a terminal program such as [PuTTY](https://www.putty.org/) (Windows only). Within PuTTY, click “Serial”, enter the “Serial line” com port (can be found at step 4), enter “Speed” as 921600, then click “Open”.
These instructions currently require a few commmand lines, but it should be pretty straightforward.
1. Install "pip". Pip is the python package manager we use to get the esptool installer app. Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/). If you are using OS-X, see these [special instructions](docs/software/install-OSX.md).
2. Run "pip install --upgrade esptool" to get esptool installed on your machine.
3. Connect your radio to your USB port.
4. Confirm that your device is talking to your PC by running "esptool.py chip_id". The Heltec build also works on the TTGO LORA32 radio. You should see something like:
Note: If you have previously installed meshtastic, you don't need to run this full script instead just run `esptool.py --baud 921600 write_flash 0x10000 firmware-_board_-_country_-_version_.bin`. This will be faster, also all of your current preferences will be preserved.
7. The board will boot and show the Meshtastic logo.
8. Please post a comment on our chat so we know if these instructions worked for you ;-). If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
We offer a [python API](https://github.com/meshtastic/Meshtastic-python) that makes it easy to use these devices to provide mesh networking for your custom projects.
We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
