kopia lustrzana https://github.com/helium/longfi-arduino
37 wiersze
1.3 KiB
Markdown
37 wiersze
1.3 KiB
Markdown
|
# MCCI Catena 4610
|
||
|
|
||
|
## Installing the MCCI LMIC Library
|
||
|
|
||
|
From the Arduino IDE, open the Library Manager (Sketch->Include Library->Manage Libraries). In the search box, type MCCI and select the MCCI LoRaWAN LMIC library should be the first result.
|
||
|
|
||
|
![](https://developer.helium.com/static/library_manager-56bed2bb23b6f93e5cc3b25bdfd345a2.png)
|
||
|
|
||
|
## Board Support
|
||
|
|
||
|
### Catena 4610 - MCCI
|
||
|
Install board support package, find instructions [here](https://github.com/mcci-catena/Arduino_Core_STM32#getting-started).
|
||
|
|
||
|
Arduino IDE:
|
||
|
Select Tools -> Board: -> MCCI Catena 4610.
|
||
|
|
||
|
For the GPS sketch:
|
||
|
Select Tools -> Serial Interface -> USB + HW Serial
|
||
|
|
||
|
[Catena 4610 Product Page](https://store.mcci.com/collections/iot-building-blocks/products/mcci-catena-4610-integrated-node-for-lorawan-technology)
|
||
|
[Catena 4610 Pin Mapping Diagram](https://github.com/mcci-catena/HW-Designs/blob/master/Boards/Catena-4610/Catena-4610-Pinmapping.png)
|
||
|
|
||
|
## Programming (Uploading Method):
|
||
|
|
||
|
### Catena 4610 - MCCI
|
||
|
|
||
|
#### DFU
|
||
|
Arduino IDE:
|
||
|
Select Tools -> Upload Method -> DFU
|
||
|
|
||
|
To put the board in DFU mode, hold down the boot button while pressing and releasing the reset button.
|
||
|
|
||
|
#### ST-Link
|
||
|
Arduino IDE:
|
||
|
Select Tools -> Upload Method -> STLink
|
||
|
|
||
|
Requires an ST-Link debugger connected to SWCLK, SWDIO, Vref, and GND, refer to pin mapping diagram.
|