mirror
/
k3ng_cw_keyer
kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
Strona: 850 Beacon Operation
Strony
010 Documentation TODO List 100 Getting Support 180 Kits and Kitting 190 DXpedition Donations 200 Build: Configuring Your Keyer 210 Build: Schematic 220 Build: Wiring the Keyer 225 Sidetone, PTT, and TX Key Lines 290 Code Compilation 295 Arduino Due Hardware 300 Feature: Buttons 310 Feature: Command Line Interface 320 Feature: Command Mode 330 Feature: Display 340 Feature: Keyboard & Mouse 350 Feature: Memory 360 Feature: Speed Control 370 Feature: Winkey 380 Feature: Keypad 381 Feature: Dead Operator Watchdog 383 Feature: Sequencer 385 Feature: CW Decoder 387 Feature: Sleep 388 Auto Dim LCD Backlight and Power LED 390 Feature: Ethernet, Web Server, and Internet Linking 392 Feature: QRSS (Slow Speed CW) and HSCW (High Speed CW) 394 Feature: QLF 395 Feature: Hellschreiber 396 Direct Paddle Pin Reads Uno Nano Mega2560 397 Option: Personalized Startup Screen 400 Operating Modes 410 Timing Adjustments 415 Buffer Control 420 Transmitter Tune Mode 425 Prosigns 495 CW Training Functionality 499 Performing a "Factory Reset" 800 Audio Amplifier for CW Decoder 810 Experimental CW Decoder Circuit 815 Multiple Serial Ports 820 Banked Memory Buttons 825 Non English Character Support 830 SD Card Support 835 Command Reference 840 Mill Mode 850 Beacon Operation 860 EEPROM Information 900 Features and Options 905 Logging Program Support 907 Non English Documentation 910 Acknowledgements Home
10 850 Beacon Operation
VK2EFL edytuje tę stronę 2021-11-24 22:00:59 +11:00
Spis treści

Memory Based Beacon

Enabling FEATURE_BEACON and grounding left paddle at boot up will cause the keyer to go into a beacon mode, where it repeats memory 1 continually.

Once the keyer is in this mode it can only be stopped by resetting the processor. The code for this continuous playing of memory 1 does not look at the paddle states nor any of the buttons (command or memory).

Enabling FEATURE_BEACON_SETTING will cause the keyer to go into beacon mode at boot up if an EEPROM setting is enabled ( \_ CLI Command).

Enabling OPTION_BEACON_MODE_MEMORY_REPEAT_TIME provides a delay between each play out of memory 1 when in beacon mode. The delay time is adjusted by command mode Y, or PS2 (Y#### change memory repeat delay to #### mS) or CLI commands (\|#### set memory repeat (milliseconds) (backslash and pipe)).

Enabling OPTION_BEACON_MODE_PTT_TAIL_TIME provides PTT tail time after each time the message is played when in beacon mode. PTT tail time can be set in the file keyer_settings.h or by using the CLI command \:pt tx tail_time.

SD Card Based Beacon

A beacon can also be implemented using an SD card shield. Enable FEATURE_SD_CARD_SUPPORT and on the SD card create a directory in the root directory called keyer. Place a text file called beacon.txt with your intended beacon text. This file will be sent in CW continuously at boot up. A paddle or button tap will stop the beacon sending.