mirror
/
k3ng_cw_keyer
kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
K3NG Arduino CW Keyer
495 Commity
9 Gałęzie
0 Tagi
15 MiB
C++ 67.7%
C 32.3%
 
 
Go to file
k3ng 554fef71f8 2024.02.27.2314 
HARDWARE_MORTTY_PICO_OVER_USB - Updated for Mortty v5
 		2024-02-27 19:44:36 -05:00
k3ng_keyer 2024.02.27.2314 2024-02-27 19:44:36 -05:00
libraries 2021.12.16.01 2021-12-16 21:26:10 -05:00
preconfigurations/YaaCWk removed Morrty preconfigurations - all Mortty configurations are in hardware profiles now 2019-10-26 08:33:10 -04:00
COPYING.md Added GPL3 license file. Fixes #79. (#90) 2020-02-05 19:25:48 -05:00
LICENSE Create LICENSE 2020-07-18 17:46:56 -04:00
README.md Create README.md 2017-04-22 18:32:34 -04:00

README.md

k3ng_cw_keyer

K3NG Arduino CW Keyer

The K3NG Keyer is an open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, rivaling commercial keyers which often cost significantly more. The code can be used with a full blown Arduino board or an AVR microcontroller chip can be programmed and used directly in a circuit. This keyer is suitable as a standalone keyer or for use permanently installed inside a rig, especially homebrew QRP rigs. It’s open source code so you can fully customize it to fit your needs and also perhaps learn from it or find coding ideas for other projects.

Documentation is located here: https://github.com/k3ng/k3ng_cw_keyer/wiki