mirror
/
k3ng_cw_keyer
kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
K3NG Arduino CW Keyer
466 Commity
9 Gałęzie
0 Tagi
4,8 MiB
C++ 67.6%
C 32.3%
 
 
Go to file
k3ng 35ef08da91 2021.12.16.01 
Merged pull request 114 https://github.com/k3ng/k3ng_cw_keyer/pull/114 Support for STM32F1 boards - Thanks, 7m4mon
      Merged pull request 107 https://github.com/k3ng/k3ng_cw_keyer/pull/107 Conditional section for LGT8FX8P EEPROM handling - Thanks, Jindřich Vavruška
      Merged pull request 115 https://github.com/k3ng/k3ng_cw_keyer/pull/115 Redraw screen when exiting command mode - Thanks, VK2EFL
      Merged pull request 117 https://github.com/k3ng/k3ng_cw_keyer/pull/117 Support for LCD type: I2C 1602 with backlight using TwiLiquidCrystal library - Thanks, billyf
 		2021-12-16 21:26:10 -05:00
k3ng_keyer 2021.12.16.01 2021-12-16 21:26:10 -05:00
libraries 2021.12.16.01 2021-12-16 21:26:10 -05:00
preconfigurations/YaaCWk removed Morrty preconfigurations - all Mortty configurations are in hardware profiles now 2019-10-26 08:33:10 -04:00
COPYING.md Added GPL3 license file. Fixes #79. (#90) 2020-02-05 19:25:48 -05:00
LICENSE Create LICENSE 2020-07-18 17:46:56 -04:00
README.md Create README.md 2017-04-22 18:32:34 -04:00

README.md

k3ng_cw_keyer

K3NG Arduino CW Keyer

The K3NG Keyer is an open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, rivaling commercial keyers which often cost significantly more. The code can be used with a full blown Arduino board or an AVR microcontroller chip can be programmed and used directly in a circuit. This keyer is suitable as a standalone keyer or for use permanently installed inside a rig, especially homebrew QRP rigs. It’s open source code so you can fully customize it to fit your needs and also perhaps learn from it or find coding ideas for other projects.

Documentation is located here: https://github.com/k3ng/k3ng_cw_keyer/wiki