kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
128e827cee
The Open CW Keyer MK2 does not have any circuitry to support a second transmitter. Clearing the pin defines for this non-existent transmitter removes the possibility of the user accidentally having tx2 enabled. A long press of the memory 2 button will set the keyer up for tx2 output and there is no indication that this is the configuration. With no pins for tx2 then inadvertently selecting tx2 is not possible. |
||
|---|---|---|
| k3ng_keyer | ||
| libraries | ||
| preconfigurations/YaaCWk | ||
| COPYING.md | ||
| LICENSE | ||
| README.md | ||
README.md
k3ng_cw_keyer
K3NG Arduino CW Keyer
The K3NG Keyer is an open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, rivaling commercial keyers which often cost significantly more. The code can be used with a full blown Arduino board or an AVR microcontroller chip can be programmed and used directly in a circuit. This keyer is suitable as a standalone keyer or for use permanently installed inside a rig, especially homebrew QRP rigs. It’s open source code so you can fully customize it to fit your needs and also perhaps learn from it or find coding ideas for other projects.
Documentation is located here: https://github.com/k3ng/k3ng_cw_keyer/wiki