mirror
/
k3ng_cw_keyer
kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
K3NG Arduino CW Keyer
457 Commity
9 Gałęzie
0 Tagi
4,8 MiB
C++ 67.6%
C 32.3%
 
 
Go to file
Anthony Good 032b371cc4 2021.03.10.01 
Merged Pull Request 108 https://github.com/k3ng/k3ng_cw_keyer/pull/108 from VK2EFL
        Adds to the \S CLI listing a display of the current tx's lead and tail times, plus the hang time (in wordspace units) plus the memory repeat time.
      Merged Pull Request 109 https://github.com/k3ng/k3ng_cw_keyer/pull/109 from VK2EFL
        Adds the option of a memory repeat time between repeated playing of memory 1 when in beacon mode.
        Adds the option of having the PTT tail time added to the PTT at the end of each playing of memory 1 when in beacon mode.
 		2021-03-10 19:42:12 -05:00
k3ng_keyer 2021.03.10.01 2021-03-10 19:42:12 -05:00
libraries Add support for using the NewTone library. (#99) 2020-07-07 11:15:05 -04:00
preconfigurations/YaaCWk
…
COPYING.md Added GPL3 license file. Fixes #79. (#90) 2020-02-05 19:25:48 -05:00
LICENSE Create LICENSE 2020-07-18 17:46:56 -04:00
README.md
…

README.md

k3ng_cw_keyer

K3NG Arduino CW Keyer

The K3NG Keyer is an open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, rivaling commercial keyers which often cost significantly more. The code can be used with a full blown Arduino board or an AVR microcontroller chip can be programmed and used directly in a circuit. This keyer is suitable as a standalone keyer or for use permanently installed inside a rig, especially homebrew QRP rigs. It’s open source code so you can fully customize it to fit your needs and also perhaps learn from it or find coding ideas for other projects.

Documentation is located here: https://github.com/k3ng/k3ng_cw_keyer/wiki