kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
180 wiersze
6.4 KiB
C
180 wiersze
6.4 KiB
C
/* Pins - you must review these and configure ! */
|
|
#ifndef keyer_pin_settings_h
|
|
#define keyer_pin_settings_h
|
|
|
|
#define paddle_left 6
|
|
#define paddle_right 7
|
|
|
|
#define tx_key_line_1 5 // (high = key down/tx on)
|
|
#define tx_key_line_2 4
|
|
#define tx_key_line_3 0
|
|
#define tx_key_line_4 0
|
|
#define tx_key_line_5 0
|
|
#define tx_key_line_6 0
|
|
#define sidetone_line 0 // connect a buzzer for sidetone (optional, set to zero if not used)
|
|
#define potentiometer A7 // Speed potentiometer (0 to 5 V) Use pot from 1k to 10k
|
|
#define ptt_tx_1 3 // Radio 1 PTT ("push to talk") line
|
|
#define ptt_tx_2 2 // Radio 2 PTT ("push to talk") line
|
|
#define ptt_tx_3 0 // These are optional - set to 0 if unused
|
|
#define ptt_tx_4 0
|
|
#define ptt_tx_5 0
|
|
#define ptt_tx_6 0
|
|
#define tx_key_dit 0 // if defined, goes active for dit (any transmitter) - customized with tx_key_dit_and_dah_pins_active_state and tx_key_dit_and_dah_pins_inactive_state
|
|
#define tx_key_dah 0 // if defined, goes active for dah (any transmitter) - customized with tx_key_dit_and_dah_pins_active_state and tx_key_dit_and_dah_pins_inactive_state
|
|
|
|
#define so2r_tx_1 0 // Radio 1 transmitter selected (optional, set to zero if not used)
|
|
#define so2r_tx_2 11 // Radio 2 transmitter selected (optional, set to zero if not used)
|
|
#define so2r_rx_1 0 // Radio 1 receiver selected (optional, set to zero if not used)
|
|
#define so2r_rx_2 0 // Radio 2 receiver selected (optional, set to zero if not used)
|
|
#define so2r_rx_1s 0 // Radio 1 receiver or stereo selected (optional, set to zero if not used)
|
|
#define so2r_rx_2s 9 // Radio 2 receiver or stereo selected (optional, set to zero if not used)
|
|
#define so2r_rx_s 10 // Stereo receive selected (optional, set to zero if not used)
|
|
|
|
#ifdef FEATURE_SO2R_SWITCHES
|
|
#define so2r_tx_switch A5 // TX switch, low if TX1, high if TX2
|
|
#define so2r_rx1_switch A4 // RX 1 switch, low if RX1, high if RX2 or stereo
|
|
#define so2r_rx2_switch A3 // RX 2 switch, low if RX2, high if RX1 or stereo
|
|
#endif
|
|
|
|
#define potentiometer_enable_pin 0 // if defined, the potentiometer will be enabled only when this pin is held low; set to 0 to ignore this pin
|
|
|
|
#ifdef FEATURE_BUTTONS
|
|
#define analog_buttons_pin A1
|
|
#define command_mode_active_led 0
|
|
#endif //FEATURE_BUTTONS
|
|
|
|
/*
|
|
FEATURE_SIDETONE_SWITCH
|
|
Enabling this feature and an external toggle switch adds switch control for playing cw sidetone.
|
|
ST Switch status is displayed in the status command. This feature will override the software control of the sidetone (\o).
|
|
Arduino pin is assigned by SIDETONE_SWITCH
|
|
*/
|
|
|
|
#ifdef FEATURE_SIDETONE_SWITCH
|
|
#define SIDETONE_SWITCH 8
|
|
#endif //FEATURE_SIDETONE_SWITCH
|
|
|
|
|
|
//lcd pins
|
|
#if defined(FEATURE_LCD_4BIT) || defined(FEATURE_LCD_8BIT)
|
|
#define lcd_rs A2
|
|
#define lcd_enable 10 // pin 10 is used by Ethernet shield and will conflict with that
|
|
#define lcd_d4 6
|
|
#define lcd_d5 7
|
|
#define lcd_d6 8
|
|
#define lcd_d7 9
|
|
#endif //FEATURE_LCD_4BIT || defined(FEATURE_LCD_8BIT)
|
|
|
|
#if defined(FEATURE_LCD_8BIT) // addition four data lines for 8 bit LCD control
|
|
#define lcd_d0 20
|
|
#define lcd_d1 21
|
|
#define lcd_d2 22
|
|
#define lcd_d3 23
|
|
#endif //FEATURE_LCD_4BIT || defined(FEATURE_LCD_8BIT)
|
|
|
|
#ifdef FEATURE_LCD1602_N07DH
|
|
#define lcd_rs 8
|
|
#define lcd_enable 9
|
|
#define lcd_d4 4
|
|
#define lcd_d5 5
|
|
#define lcd_d6 6
|
|
#define lcd_d7 7
|
|
#endif //FEATURE_LCD1602_N07DH
|
|
|
|
//ps2 keyboard pins
|
|
#ifdef FEATURE_PS2_KEYBOARD
|
|
#define ps2_keyboard_data A3
|
|
#define ps2_keyboard_clock 3 // this must be on an interrupt capable pin!
|
|
#endif //FEATURE_PS2_KEYBOARD
|
|
|
|
// rotary encoder pins and options - rotary encoder code from Jim Balls M0CKE
|
|
#ifdef FEATURE_ROTARY_ENCODER
|
|
#define OPTION_ENCODER_HALF_STEP_MODE // Half-step mode?
|
|
#define rotary_pin1 0 // CW Encoder Pin
|
|
#define rotary_pin2 0 // CCW Encoder Pin
|
|
#define OPTION_ENCODER_ENABLE_PULLUPS // define to enable weak pullups.
|
|
#endif //FEATURE_ROTARY_ENCODER
|
|
|
|
#ifdef FEATURE_LED_RING
|
|
#define led_ring_sdi A10 //2 //Data
|
|
#define led_ring_clk A9 //3 //Clock
|
|
#define led_ring_le A8 //4 //Latch
|
|
#endif //FEATURE_LED_RING
|
|
|
|
#define correct_answer_led 0
|
|
#define wrong_answer_led 0
|
|
|
|
#ifdef FEATURE_PTT_INTERLOCK
|
|
#define ptt_interlock 0 // this pin disables PTT and TX KEY
|
|
#endif //FEATURE_PTT_INTERLOCK
|
|
|
|
#ifdef FEATURE_STRAIGHT_KEY
|
|
#define pin_straight_key 52
|
|
#endif //FEATURE_STRAIGHT_KEY
|
|
|
|
// FEATURE_CW_DECODER & OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR
|
|
// See https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder for details
|
|
#define cw_decoder_pin 0 // This is for use with external decoding hardware
|
|
#define cw_decoder_audio_input_pin 0 // This is for audio detection decoding using OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR; this must be an analog pin!
|
|
#define cw_decoder_indicator 0 // Output - goes HIGH when cw tone is detected by OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR
|
|
|
|
|
|
#if defined(FEATURE_COMPETITION_COMPRESSION_DETECTION)
|
|
#define compression_detection_pin 13
|
|
#endif //FEATURE_COMPETITION_COMPRESSION_DETECTION
|
|
|
|
#if defined(FEATURE_SLEEP)
|
|
#define keyer_awake 0
|
|
#endif
|
|
|
|
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
|
|
#define keyer_power_led 0 // must be a PWM-capable pin
|
|
#endif
|
|
|
|
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
|
|
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
|
|
#endif
|
|
|
|
#ifdef FEATURE_4x4_KEYPAD
|
|
#define Row3 33
|
|
#define Row2 32
|
|
#define Row1 31
|
|
#define Row0 30
|
|
#define Col3 37
|
|
#define Col2 36
|
|
#define Col1 35
|
|
#define Col0 34
|
|
#endif
|
|
|
|
#ifdef FEATURE_3x4_KEYPAD
|
|
#define Row3 33
|
|
#define Row2 32
|
|
#define Row1 31
|
|
#define Row0 30
|
|
#define Col2 36
|
|
#define Col1 35
|
|
#define Col0 34
|
|
#endif
|
|
|
|
#ifdef FEATURE_SEQUENCER
|
|
#define sequencer_1_pin 0
|
|
#define sequencer_2_pin 0
|
|
#define sequencer_3_pin 0
|
|
#define sequencer_4_pin 0
|
|
#define sequencer_5_pin 0
|
|
#endif //FEATURE_SEQUENCER
|
|
|
|
#define ptt_input_pin 8
|
|
|
|
#define tx_inhibit_pin 0
|
|
#define tx_pause_pin 0
|
|
|
|
#define pin_sending_mode_automatic 0 // goes HIGH when keyer is sending code automatically
|
|
#define pin_sending_mode_manual 0 // goes HIGH when keyer is sending code manually (i.e. the paddle or straight key)
|
|
|
|
#else
|
|
|
|
#error "Multiple pin_settings.h files included somehow..."
|
|
|
|
#endif //keyer_pin_settings_h
|