kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
added HARDWARE_TEST files and README for libraries
Anthony Good
rodzic
407f6293cb
commit
f6c6783100
|
|
@ -0,0 +1,103 @@
|
|||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
||||
|
||||
#define FEATURE_COMMAND_BUTTONS
|
||||
#define FEATURE_COMMAND_LINE_INTERFACE // Command Line Interface functionality
|
||||
#define FEATURE_MEMORIES // on the Arduino Due, you must have FEATURE_EEPROM_E24C1024 and E24C1024 EEPROM hardware in order to compile this
|
||||
#define FEATURE_MEMORY_MACROS
|
||||
// #define FEATURE_WINKEY_EMULATION // disabling Automatic Software Reset is highly recommended (see documentation) (this no longer requires FEATURE_SERIAL)
|
||||
// #define FEATURE_BEACON
|
||||
#define FEATURE_CALLSIGN_RECEIVE_PRACTICE
|
||||
#define FEATURE_POTENTIOMETER // do not enable unless you have a potentiometer connected, otherwise noise will falsely trigger wpm changes
|
||||
#define FEATURE_SERIAL_HELP
|
||||
// #define FEATURE_HELL
|
||||
#define FEATURE_PS2_KEYBOARD // Use a PS2 keyboard to send code - Change keyboard layout (non-US) in K3NG_PS2Keyboard.h. Additional options below.
|
||||
// #define FEATURE_USB_KEYBOARD // Use a USB keyboard to send code - Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)
|
||||
// #define FEATURE_CW_COMPUTER_KEYBOARD // Have an Arduino Due or Leonardo act as a USB HID (Human Interface Device) keyboard and use the paddle to "type" characters on the computer
|
||||
// #define FEATURE_DEAD_OP_WATCHDOG
|
||||
// #define FEATURE_AUTOSPACE
|
||||
#define FEATURE_FARNSWORTH
|
||||
// #define FEATURE_DL2SBA_BANKSWITCH // Switch memory banks feature as described here: http://dl2sba.com/index.php?option=com_content&view=article&id=131:nanokeyer&catid=15:shack&Itemid=27#english
|
||||
// #define FEATURE_LCD_4BIT // classic LCD disidefplay using 4 I/O lines
|
||||
// #define FEATURE_LCD_ADAFRUIT_I2C // Adafruit I2C LCD display using MCP23017 at addr 0x20
|
||||
// #define FEATURE_LCD_YDv1 // YourDuino I2C LCD display with old LCM 1602 V1 ic
|
||||
// #define FEATURE_LCD1602_N07DH // http://linksprite.com/wiki/index.php5?title=16_X_2_LCD_Keypad_Shield_for_Arduino
|
||||
#define FEATURE_CW_DECODER
|
||||
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
|
||||
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
|
||||
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
|
||||
#define FEATURE_DIT_DAH_BUFFER_CONTROL
|
||||
// #define FEATURE_HI_PRECISION_LOOP_TIMING
|
||||
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)
|
||||
// #define FEATURE_CAPACITIVE_PADDLE_PINS // remove the bypass capacitors on the paddle_left and paddle_right lines when using capactive paddles
|
||||
// #define FEATURE_LED_RING // Mayhew Labs Led Ring support
|
||||
// #define FEATURE_ALPHABET_SEND_PRACTICE // enables command mode S command - created by Ryan, KC2ZWM
|
||||
// #define FEATURE_PTT_INTERLOCK
|
||||
#define FEATURE_QLF
|
||||
// #define FEATURE_EEPROM_E24C1024
|
||||
#define FEATURE_STRAIGHT_KEY
|
||||
// #define FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
||||
#define FEATURE_PADDLE_ECHO
|
||||
#define FEATURE_STRAIGHT_KEY_ECHO
|
||||
|
||||
// #define FEATURE_COMMAND_LINE_INTERFACE_ON_SECONDARY_PORT // Activate the Command Line interface on the secondary serial port
|
||||
#define OPTION_PRIMARY_SERIAL_PORT_DEFAULT_WINKEY_EMULATION // Use when activating both FEATURE_WINKEY_EMULATION and FEATURE_COMMAND_LINE_INTERFACE
|
||||
// simultaneously. This will make Winkey emulation be the default at boot up;
|
||||
// hold command button down at boot up to activate CLI mode
|
||||
|
||||
// #define OPTION_SUPPRESS_SERIAL_BOOT_MSG
|
||||
#define OPTION_INCLUDE_PTT_TAIL_FOR_MANUAL_SENDING
|
||||
#define OPTION_EXCLUDE_PTT_HANG_TIME_FOR_MANUAL_SENDING
|
||||
// #define OPTION_WINKEY_DISCARD_BYTES_AT_STARTUP // if ASR is not disabled, you may need this to discard errant serial port bytes at startup
|
||||
// #define OPTION_WINKEY_STRICT_EEPROM_WRITES_MAY_WEAR_OUT_EEPROM // with this activated the unit will write non-volatile settings to EEPROM when set by Winkey commands
|
||||
// #define OPTION_WINKEY_SEND_WORDSPACE_AT_END_OF_BUFFER
|
||||
#define OPTION_WINKEY_STRICT_HOST_OPEN // require an admin host open Winkey command before doing any other commands
|
||||
#define OPTION_WINKEY_2_SUPPORT // comment out to revert to Winkey version 1 emulation
|
||||
// #define OPTION_WINKEY_EXTENDED_COMMANDS // in development
|
||||
#define OPTION_WINKEY_SEND_BREAKIN_STATUS_BYTE // additional code to check_dit_paddle() and check_dah_paddle() to send 0xC2 status byte when paddles are hit
|
||||
#define OPTION_WINKEY_INTERRUPTS_MEMORY_REPEAT
|
||||
// #define OPTION_WINKEY_2_HOST_CLOSE_NO_SERIAL_PORT_RESET // activate this when using Winkey 2 emulation and Win-Test
|
||||
// #define OPTION_WINKEY_FREQUENT_STATUS_REPORT // activate this to make Winkey emulation play better with RUMlog and RUMped
|
||||
#define OPTION_WINKEY_IGNORE_LOWERCASE // Enable for typical K1EL Winkeyer behavior (use for SkookumLogger version 1.10.14 and prior to workaround "r" bug)
|
||||
// #define OPTION_REVERSE_BUTTON_ORDER // This is mainly for the DJ0MY NanoKeyer http://nanokeyer.wordpress.com/
|
||||
#define OPTION_PROG_MEM_TRIM_TRAILING_SPACES // trim trailing spaces from memory when programming in command mode
|
||||
#define OPTION_DIT_PADDLE_NO_SEND_ON_MEM_RPT // this makes dit paddle memory interruption a little smoother
|
||||
// #define OPTION_MORE_DISPLAY_MSGS // additional optional display messages - comment out to save memory
|
||||
// #define OPTION_N1MM_WINKEY_TAB_BUG_WORKAROUND // enable this to ignore the TAB key in the Send CW window (this breaks SO2R functionality in N1MM)
|
||||
// #define OPTION_WATCHDOG_TIMER // this enables a four second ATmega48/88/168/328 watchdog timer; use for unattended/remote operation only
|
||||
// #define OPTION_MOUSE_MOVEMENT_PADDLE // experimental (just fooling around) - mouse movement will act like a paddle
|
||||
// #define OPTION_NON_ENGLISH_EXTENSIONS // add support for additional CW characters (i.e. À, Å, Þ, etc.)
|
||||
// #define OPTION_KEEP_PTT_KEYED_WHEN_CHARS_BUFFERED // this option keeps PTT high if there are characters buffered from the keyboard, the serial interface, or Winkey
|
||||
// #define OPTION_DISPLAY_NON_ENGLISH_EXTENSIONS // LCD display suport for non-English (NO/DK/DE) characters - Courtesy of OZ1JHM
|
||||
// #define OPTION_UNKNOWN_CHARACTER_ERROR_TONE
|
||||
// #define OPTION_DO_NOT_SAY_HI
|
||||
// #define OPTION_USE_ORIGINAL_VERSION_2_1_PS2KEYBOARD_LIB //use version 2.1 PS2Keyboard.h and PS2Keyboard.cpp for FEATURE_PS2_KEYBOARD
|
||||
// #define OPTION_PS2_NON_ENGLISH_CHAR_LCD_DISPLAY_SUPPORT // makes some non-English characters from the PS2 keyboard display correctly in the LCD display (donated by Marcin sp5iou)
|
||||
// #define OPTION_PS2_KEYBOARD_RESET // reset the PS2 keyboard upon startup with 0xFF (contributed by Bill, W9BEL)
|
||||
// #define OPTION_SAVE_MEMORY_NANOKEYER
|
||||
#define OPTION_CW_KEYBOARD_CAPSLOCK_BEEP
|
||||
// #define OPTION_CW_KEYBOARD_ITALIAN
|
||||
#define OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR
|
||||
// #define OPTION_INVERT_PADDLE_PIN_LOGIC
|
||||
// #define OPTION_DIT_DAH_BUFFERS_OFF_BY_DEFAULT_FOR_FEATURE_DIT_DAH_BUFFER_CONTROL
|
||||
// #define OPTION_ADVANCED_SPEED_DISPLAY //enables "nerd" speed visualization on display: wpm, cpm (char per min), duration of dit and dah in milliseconds and ratio (contributed by Giorgio, IZ2XBZ)
|
||||
// #define OPTION_PROSIGN_SUPPORT // additional prosign support for paddle and straight key echo on display, CLI, and in memory storage
|
||||
|
||||
// #define FEATURE_COMPETITION_COMPRESSION_DETECTION //(Experimental)
|
||||
|
||||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
||||
|
|
@ -0,0 +1,118 @@
|
|||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
||||
|
||||
#ifndef keyer_pin_settings_h
|
||||
#define keyer_pin_settings_h
|
||||
|
||||
#define paddle_left 2
|
||||
#define paddle_right 5
|
||||
#define tx_key_line_1 11 // (high = key down/tx on)
|
||||
#define tx_key_line_2 12
|
||||
#define tx_key_line_3 0
|
||||
#define tx_key_line_4 0
|
||||
#define tx_key_line_5 0
|
||||
#define tx_key_line_6 0
|
||||
#define sidetone_line 4 // connect a speaker for sidetone
|
||||
#define potentiometer A0 // Speed potentiometer (0 to 5 V) Use pot from 1k to 10k
|
||||
#define ptt_tx_1 0 // PTT ("push to talk") lines
|
||||
#define ptt_tx_2 0 // Can be used for keying fox transmitter, T/R switch, or keying slow boatanchors
|
||||
#define ptt_tx_3 0 // These are optional - set to 0 if unused
|
||||
#define ptt_tx_4 0
|
||||
#define ptt_tx_5 0
|
||||
#define ptt_tx_6 0
|
||||
#define tx_key_dit 0 // if defined, goes high for dit (any transmitter)
|
||||
#define tx_key_dah 0 // if defined, goes high for dah (any transmitter)
|
||||
|
||||
#ifdef FEATURE_COMMAND_BUTTONS
|
||||
#define analog_buttons_pin A1
|
||||
#define command_mode_active_led 0
|
||||
#endif //FEATURE_COMMAND_BUTTONS
|
||||
|
||||
|
||||
//lcd pins
|
||||
#ifdef FEATURE_LCD_4BIT
|
||||
#define lcd_rs A2
|
||||
#define lcd_enable 10
|
||||
#define lcd_d4 6
|
||||
#define lcd_d5 7
|
||||
#define lcd_d6 8
|
||||
#define lcd_d7 9
|
||||
#endif //FEATURE_LCD_4BIT
|
||||
|
||||
#ifdef FEATURE_LCD1602_N07DH
|
||||
#define lcd_rs 8
|
||||
#define lcd_enable 9
|
||||
#define lcd_d4 4
|
||||
#define lcd_d5 5
|
||||
#define lcd_d6 6
|
||||
#define lcd_d7 7
|
||||
#endif //FEATURE_LCD1602_N07DH
|
||||
|
||||
//ps2 keyboard pins
|
||||
#ifdef FEATURE_PS2_KEYBOARD
|
||||
#define ps2_keyboard_data A3
|
||||
#define ps2_keyboard_clock 3 // this must be on an interrupt capable pin!
|
||||
#endif //FEATURE_PS2_KEYBOARD
|
||||
|
||||
// rotary encoder pins and options - rotary encoder code from Jim Balls M0CKE
|
||||
#ifdef FEATURE_ROTARY_ENCODER
|
||||
#define OPTION_ENCODER_HALF_STEP_MODE // Half-step mode?
|
||||
#define rotary_pin1 0 // CW Encoder Pin
|
||||
#define rotary_pin2 0 // CCW Encoder Pin
|
||||
#define OPTION_ENCODER_ENABLE_PULLUPS // define to enable weak pullups.
|
||||
#endif //FEATURE_ROTARY_ENCODER
|
||||
|
||||
#ifdef FEATURE_LED_RING
|
||||
#define led_ring_sdi A10 //2 //Data
|
||||
#define led_ring_clk A9 //3 //Clock
|
||||
#define led_ring_le A8 //4 //Latch
|
||||
#endif //FEATURE_LED_RING
|
||||
|
||||
#ifdef FEATURE_ALPHABET_SEND_PRACTICE
|
||||
#define correct_answer_led 0
|
||||
#define wrong_answer_led 0
|
||||
#endif //FEATURE_ALPHABET_SEND_PRACTICE
|
||||
|
||||
#ifdef FEATURE_PTT_INTERLOCK
|
||||
#define ptt_interlock 0 // this pin disables PTT and TX KEY
|
||||
#endif //FEATURE_PTT_INTERLOCK
|
||||
|
||||
#ifdef FEATURE_STRAIGHT_KEY
|
||||
#define pin_straight_key 52
|
||||
#endif //FEATURE_STRAIGHT_KEY
|
||||
|
||||
#ifdef FEATURE_CW_DECODER
|
||||
#define cw_decoder_pin A3//A11 //A5 //A3
|
||||
#ifdef OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR
|
||||
#define cw_decoder_audio_input_pin 0 // this must be an analog pin!
|
||||
#endif //OPTION_CW_DECODER_GOERTZEL_AUDIO_DETECTOR
|
||||
#define cw_decoder_indicator 24
|
||||
#endif //FEATURE_CW_DECODER
|
||||
|
||||
|
||||
#if defined(FEATURE_COMPETITION_COMPRESSION_DETECTION)
|
||||
#define compression_detection_pin 13
|
||||
#endif //FEATURE_COMPETITION_COMPRESSION_DETECTION
|
||||
|
||||
#if defined(FEATURE_SLEEP)
|
||||
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
|
||||
#endif
|
||||
|
||||
#endif //keyer_pin_settings_h
|
||||
|
||||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
||||
|
|
@ -0,0 +1,313 @@
|
|||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
||||
|
||||
|
||||
#define initial_speed_wpm 26 // "factory default" keyer speed setting
|
||||
#define initial_sidetone_freq 600 // "factory default" sidetone frequency setting
|
||||
#define hz_high_beep 1500 // frequency in hertz of high beep
|
||||
#define hz_low_beep 400 // frequency in hertz of low beep
|
||||
#define initial_dah_to_dit_ratio 300 // 300 = 3 / normal 3:1 ratio
|
||||
#define initial_ptt_lead_time_tx1 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx1 10 // PTT tail time in mS
|
||||
#define initial_ptt_lead_time_tx2 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx2 10 // PTT tail time in mS
|
||||
#define initial_ptt_lead_time_tx3 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx3 10 // PTT tail time in mS
|
||||
#define initial_ptt_lead_time_tx4 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx4 10 // PTT tail time in mS
|
||||
#define initial_ptt_lead_time_tx5 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx5 10 // PTT tail time in mS
|
||||
#define initial_ptt_lead_time_tx6 0 // PTT lead time in mS
|
||||
#define initial_ptt_tail_time_tx6 10 // PTT tail time in mS
|
||||
#define initial_qrss_dit_length 1 // QRSS dit length in seconds
|
||||
#define initial_pot_wpm_low_value 13 // Potentiometer WPM fully CCW
|
||||
#define initial_pot_wpm_high_value 35 // Potentiometer WPM fully CW
|
||||
#define wpm_limit_low 5
|
||||
#define wpm_limit_high 60
|
||||
#define potentiometer_change_threshold 0.9 // don't change the keyer speed until pot wpm has changed more than this
|
||||
#define send_buffer_size 150
|
||||
#define default_length_letterspace 3
|
||||
#define default_length_wordspace 7
|
||||
#define default_keying_compensation 0 // number of milliseconds to extend all dits and dahs - for QSK on boatanchors
|
||||
#define default_first_extension_time 0 // number of milliseconds to extend first sent dit or dah
|
||||
#define default_pot_full_scale_reading 1023
|
||||
#define default_weighting 50 // 50 = weighting factor of 1 (normal)
|
||||
#define default_ptt_hang_time_wordspace_units 0.0
|
||||
#define memory_area_start 30 // the eeprom location where memory space starts
|
||||
#define memory_area_end 1023 // the eeprom location where memory space ends
|
||||
#define winkey_c0_wait_time 1 // the number of milliseconds to wait to send 0xc0 byte after send buffer has been sent
|
||||
#define winkey_command_timeout_ms 5000
|
||||
#define winkey_discard_bytes_startup 3 // this is used if OPTION_WINKEY_DISCARD_BYTES_AT_STARTUP is enabled above
|
||||
#define winkey_xoff_threshold 20 // the number of chars in the buffer when we begin sending XOFFs
|
||||
#define winkey_xon_threshold 10 // the number of chars in the buffer below which we deactivate XOFF
|
||||
#define default_memory_repeat_time 3000 // time in milliseconds
|
||||
#define LCD_COLUMNS 16
|
||||
#define LCD_ROWS 2
|
||||
#define hell_pixel_microseconds 4025
|
||||
#define program_memory_limit_consec_spaces 1
|
||||
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
|
||||
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
|
||||
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
|
||||
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
|
||||
#define cw_echo_timing_factor 0.25
|
||||
#define potentiometer_always_on 0
|
||||
#define ptt_interlock_check_every_ms 100
|
||||
#define ptt_interlock_active_state HIGH
|
||||
#define unknown_cw_character '*'
|
||||
#define cli_paddle_echo_on_at_boot 1
|
||||
#define cli_straight_key_echo_on_at_boot 1
|
||||
|
||||
#ifdef FEATURE_COMMAND_BUTTONS
|
||||
#define analog_buttons_number_of_buttons 4
|
||||
#define analog_buttons_r1 10
|
||||
#define analog_buttons_r2 1
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(FEATURE_COMMAND_BUTTONS) && !defined(FEATURE_PS2_KEYBOARD) && !defined(FEATURE_USB_KEYBOARD) && !defined(FEATURE_COMMAND_LINE_INTERFACE) && !defined(FEATURE_WINKEY_EMULATION)
|
||||
#define number_of_memories byte(analog_buttons_number_of_buttons-1)
|
||||
#else
|
||||
#define number_of_memories byte(12)
|
||||
#endif
|
||||
|
||||
#ifdef FEATURE_CAPACITIVE_PADDLE_PINS
|
||||
#define capacitance_threshold 2
|
||||
#endif //FEATURE_CAPACITIVE_PADDLE_PINS
|
||||
|
||||
#ifdef FEATURE_LED_RING
|
||||
#define led_ring_low_limit 10
|
||||
#define led_ring_high_limit 50
|
||||
#endif //FEATURE_LED_RING
|
||||
|
||||
#ifdef FEATURE_QLF
|
||||
#define qlf_dit_max 125
|
||||
#define qlf_dit_min 75
|
||||
#define qlf_dah_max 200
|
||||
#define qlf_dah_min 100
|
||||
#define qlf_on_by_default 0
|
||||
#endif //FEATURE_QLF
|
||||
|
||||
// Variable macros
|
||||
#define STRAIGHT 1
|
||||
#define IAMBIC_B 2
|
||||
#define IAMBIC_A 3
|
||||
#define BUG 4
|
||||
#define ULTIMATIC 5
|
||||
|
||||
#define PADDLE_NORMAL 0
|
||||
#define PADDLE_REVERSE 1
|
||||
|
||||
#define KEYER_NORMAL 0
|
||||
#define BEACON 1
|
||||
#define KEYER_COMMAND_MODE 2
|
||||
|
||||
#define OMIT_LETTERSPACE 1
|
||||
|
||||
#define SIDETONE_OFF 0
|
||||
#define SIDETONE_ON 1
|
||||
#define SIDETONE_PADDLE_ONLY 2
|
||||
|
||||
#define SENDING_NOTHING 0
|
||||
#define SENDING_DIT 1
|
||||
#define SENDING_DAH 2
|
||||
|
||||
#define SPEED_NORMAL 0
|
||||
#define SPEED_QRSS 1
|
||||
|
||||
#define CW 0
|
||||
#define HELL 1
|
||||
|
||||
#ifdef FEATURE_PS2_KEYBOARD
|
||||
#define PS2_KEYBOARD_NORMAL 0
|
||||
#endif //FEATURE_PS2_KEYBOARD
|
||||
|
||||
#define SERIAL_CLI 0
|
||||
#define SERIAL_WINKEY_EMULATION 1
|
||||
|
||||
#define SERIAL_SEND_BUFFER_SPECIAL_START 13
|
||||
#define SERIAL_SEND_BUFFER_WPM_CHANGE 14
|
||||
#define SERIAL_SEND_BUFFER_PTT_ON 15
|
||||
#define SERIAL_SEND_BUFFER_PTT_OFF 16
|
||||
#define SERIAL_SEND_BUFFER_TIMED_KEY_DOWN 17
|
||||
#define SERIAL_SEND_BUFFER_TIMED_WAIT 18
|
||||
#define SERIAL_SEND_BUFFER_NULL 19
|
||||
#define SERIAL_SEND_BUFFER_PROSIGN 20
|
||||
#define SERIAL_SEND_BUFFER_HOLD_SEND 21
|
||||
#define SERIAL_SEND_BUFFER_HOLD_SEND_RELEASE 22
|
||||
#define SERIAL_SEND_BUFFER_MEMORY_NUMBER 23
|
||||
#define SERIAL_SEND_BUFFER_SPECIAL_END 24
|
||||
|
||||
#if defined(OPTION_PROSIGN_SUPPORT)
|
||||
#define PROSIGN_START 127
|
||||
#define PROSIGN_AA 128
|
||||
#define PROSIGN_AS 129
|
||||
#define PROSIGN_BK 130
|
||||
#define PROSIGN_CL 131
|
||||
#define PROSIGN_CT 132
|
||||
#define PROSIGN_KN 133
|
||||
#define PROSIGN_NJ 134
|
||||
#define PROSIGN_SK 135
|
||||
#define PROSIGN_SN 136
|
||||
#define PROSIGN_END 137
|
||||
#endif
|
||||
|
||||
#define SERIAL_SEND_BUFFER_NORMAL 0
|
||||
#define SERIAL_SEND_BUFFER_TIMED_COMMAND 1
|
||||
#define SERIAL_SEND_BUFFER_HOLD 2
|
||||
|
||||
#ifdef FEATURE_WINKEY_EMULATION
|
||||
#define WINKEY_NO_COMMAND_IN_PROGRESS 0
|
||||
#define WINKEY_UNBUFFERED_SPEED_COMMAND 1
|
||||
#define WINKEY_UNSUPPORTED_COMMAND 2
|
||||
#define WINKEY_POINTER_COMMAND 3
|
||||
#define WINKEY_ADMIN_COMMAND 4
|
||||
#define WINKEY_PAUSE_COMMAND 5
|
||||
#define WINKEY_KEY_COMMAND 6
|
||||
#define WINKEY_SETMODE_COMMAND 7
|
||||
#define WINKEY_SIDETONE_FREQ_COMMAND 8
|
||||
#define WINKEY_ADMIN_COMMAND_ECHO 9
|
||||
#define WINKEY_BUFFERED_SPEED_COMMAND 10
|
||||
#define WINKEY_DAH_TO_DIT_RATIO_COMMAND 11
|
||||
#define WINKEY_KEYING_COMPENSATION_COMMAND 12
|
||||
#define WINKEY_FIRST_EXTENSION_COMMAND 13
|
||||
#define WINKEY_PTT_TIMES_PARM1_COMMAND 14
|
||||
#define WINKEY_PTT_TIMES_PARM2_COMMAND 15
|
||||
#define WINKEY_SET_POT_PARM1_COMMAND 16
|
||||
#define WINKEY_SET_POT_PARM2_COMMAND 17
|
||||
#define WINKEY_SET_POT_PARM3_COMMAND 18
|
||||
#define WINKEY_SOFTWARE_PADDLE_COMMAND 19
|
||||
#define WINKEY_CANCEL_BUFFERED_SPEED_COMMAND 20
|
||||
#define WINKEY_BUFFFERED_PTT_COMMMAND 21
|
||||
#define WINKEY_HSCW_COMMAND 22
|
||||
#define WINKEY_BUFFERED_HSCW_COMMAND 23
|
||||
#define WINKEY_WEIGHTING_COMMAND 24
|
||||
#define WINKEY_KEY_BUFFERED_COMMAND 25
|
||||
#define WINKEY_WAIT_BUFFERED_COMMAND 26
|
||||
#define WINKEY_POINTER_01_COMMAND 27
|
||||
#define WINKEY_POINTER_02_COMMAND 28
|
||||
#define WINKEY_POINTER_03_COMMAND 29
|
||||
#define WINKEY_FARNSWORTH_COMMAND 30
|
||||
#define WINKEY_MERGE_COMMAND 31
|
||||
#define WINKEY_MERGE_PARM_2_COMMAND 32
|
||||
#define WINKEY_SET_PINCONFIG_COMMAND 33
|
||||
#define WINKEY_EXTENDED_COMMAND 34
|
||||
#ifdef OPTION_WINKEY_2_SUPPORT
|
||||
#define WINKEY_SEND_MSG 35
|
||||
#endif //OPTION_WINKEY_2_SUPPORT
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_1_COMMAND 101
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_2_COMMAND 102
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_3_COMMAND 103
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_4_COMMAND 104
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_5_COMMAND 105
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_6_COMMAND 106
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_7_COMMAND 107
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_8_COMMAND 108
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_9_COMMAND 109
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_10_COMMAND 110
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_11_COMMAND 111
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_12_COMMAND 112
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_13_COMMAND 113
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_14_COMMAND 114
|
||||
#define WINKEY_LOAD_SETTINGS_PARM_15_COMMAND 115
|
||||
|
||||
#define WINKEY_HOUSEKEEPING 0
|
||||
#define SERVICE_SERIAL_BYTE 1
|
||||
#endif //FEATURE_WINKEY_EMULATION
|
||||
|
||||
#define AUTOMATIC_SENDING 0
|
||||
#define MANUAL_SENDING 1
|
||||
|
||||
#define ULTIMATIC_NORMAL 0
|
||||
#define ULTIMATIC_DIT_PRIORITY 1
|
||||
#define ULTIMATIC_DAH_PRIORITY 2
|
||||
|
||||
#ifdef FEATURE_WINKEY_EMULATION
|
||||
// alter these below to map alternate sidetones for Winkey interface protocol emulation
|
||||
#ifdef OPTION_WINKEY_2_SUPPORT
|
||||
#define WINKEY_SIDETONE_1 3759
|
||||
#define WINKEY_SIDETONE_2 1879
|
||||
#define WINKEY_SIDETONE_3 1252
|
||||
#define WINKEY_SIDETONE_4 940
|
||||
#define WINKEY_SIDETONE_5 752
|
||||
#define WINKEY_SIDETONE_6 625
|
||||
#define WINKEY_SIDETONE_7 535
|
||||
#define WINKEY_SIDETONE_8 469
|
||||
#define WINKEY_SIDETONE_9 417
|
||||
#define WINKEY_SIDETONE_10 375
|
||||
#else //OPTION_WINKEY_2_SUPPORT
|
||||
#define WINKEY_SIDETONE_1 4000
|
||||
#define WINKEY_SIDETONE_2 2000
|
||||
#define WINKEY_SIDETONE_3 1333
|
||||
#define WINKEY_SIDETONE_4 1000
|
||||
#define WINKEY_SIDETONE_5 800
|
||||
#define WINKEY_SIDETONE_6 666
|
||||
#define WINKEY_SIDETONE_7 571
|
||||
#define WINKEY_SIDETONE_8 500
|
||||
#define WINKEY_SIDETONE_9 444
|
||||
#define WINKEY_SIDETONE_10 400
|
||||
#endif //OPTION_WINKEY_2_SUPPORT
|
||||
|
||||
#define WINKEY_1_REPORT_VERSION_NUMBER 10
|
||||
#define WINKEY_2_REPORT_VERSION_NUMBER 23
|
||||
|
||||
// alter these to map to alternate hang time wordspace units
|
||||
#define WINKEY_HANG_TIME_1_0 1.0
|
||||
#define WINKEY_HANG_TIME_1_33 1.33
|
||||
#define WINKEY_HANG_TIME_1_66 1.66
|
||||
#define WINKEY_HANG_TIME_2_0 2.0
|
||||
|
||||
#endif //FEATURE_WINKEY_EMULATION
|
||||
|
||||
#define PRINTCHAR 0
|
||||
#define NOPRINT 1
|
||||
|
||||
#define PRIMARY_SERIAL_PORT &Serial
|
||||
#define PRIMARY_SERIAL_PORT_BAUD 115200 // This applies only when the port is in Command Line Interface mode. In Winkey mode it will default to 1200.
|
||||
|
||||
#ifdef FEATURE_COMMAND_LINE_INTERFACE_ON_SECONDARY_PORT
|
||||
#define SECONDARY_SERIAL_PORT &Serial1
|
||||
#define SECONDARY_SERIAL_PORT_BAUD 115200
|
||||
#endif
|
||||
|
||||
|
||||
#define CW_DECODER_SCREEN_COLUMNS 120 // word wrap at this many columns
|
||||
#define CW_DECODER_SPACE_PRINT_THRESH 4.5 // print space if no tone for this many element lengths
|
||||
#define CW_DECODER_SPACE_DECODE_THRESH 2.0 // invoke character decode if no tone for this many element lengths
|
||||
#define CW_DECODER_NOISE_FILTER 20 // ignore elements shorter than this (mS)
|
||||
|
||||
#define STRAIGHT_KEY_ACTIVE_STATE LOW
|
||||
|
||||
#ifdef FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
||||
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_WPM 30
|
||||
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_RATIO 300 // 300 = 3:1 ratio
|
||||
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_WPM 70
|
||||
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_RATIO 240 // 240 = 2.4:1 ratio
|
||||
#endif //FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
||||
|
||||
#if defined(FEATURE_COMPETITION_COMPRESSION_DETECTION)
|
||||
#define COMPETITION_COMPRESSION_DETECTION_ARRAY_SIZE 16
|
||||
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_LOWER_LIMIT 1
|
||||
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_UPPER_LIMIT 6.0
|
||||
#define COMPETITION_COMPRESSION_DETECTION_AVERAGE_ALARM_THRESHOLD 3.0
|
||||
#endif //FEATURE_COMPETITION_COMPRESSION_DETECTION
|
||||
|
||||
#if defined(FEATURE_SLEEP)
|
||||
#define KEYER_AWAKE_PIN_AWAKE_STATE HIGH
|
||||
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
|
||||
#endif
|
||||
|
||||
|
||||
// ######## ######## ###### ########
|
||||
// ## ## ## ## ##
|
||||
// ## ## ## ##
|
||||
// ## ###### ###### ##
|
||||
// ## ## ## ##
|
||||
// ## ## ## ## ##
|
||||
// ## ######## ###### ##
|
||||
|
|
@ -0,0 +1 @@
|
|||
AS OF VERSION 2.2.2016012004 LIBRARY FILES MUST BE PUT IN LIBRARIES DIRECTORY AND NOT THE INO SKETCH DIRECTORY !!!!
|
||||
Ładowanie…
Reference in New Issue