mirror
/
k3ng_cw_keyer
kopia lustrzana https://github.com/k3ng/k3ng_cw_keyer
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Add FEATURE_LCD_BACKLIGHT_AUTO_DIM dims LCD and/or Power LED after x minutes (#110)

pull/115/head
Ron Craig 2021-03-19 20:28:35 -04:00 zatwierdzone przez GitHub
rodzic 032b371cc4
commit 45cf4f5b8f
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
68 zmienionych plików z 358 dodań i 7 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

108
k3ng_keyer/k3ng_keyer.ino
Wyświetl plik

@ -1721,6 +1721,10 @@ uint16_t memory_area_end = 0;
unsigned long last_activity_time = 0;
#endif
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
unsigned long last_active_time = 0;
#endif
#ifdef FEATURE_DISPLAY
enum lcd_statuses {LCD_CLEAR, LCD_REVERT, LCD_TIMED_MESSAGE, LCD_SCROLL_MSG};
@ -2388,6 +2392,10 @@ void loop()
check_sleep();
#endif
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
check_backlight();
#endif
#ifdef FEATURE_PTT_INTERLOCK
service_ptt_interlock();
#endif
@ -2733,6 +2741,9 @@ void service_keypad(){
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
} else {
@ -3404,6 +3415,9 @@ void check_sleep(){
}
last_activity_time = millis();
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
#ifdef DEBUG_SLEEP
debug_serial_port->println(F("check_sleep: I'm awake!"));
@ -3416,6 +3430,44 @@ void check_sleep(){
//-------------------------------------------------------------------------------------------------------
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
void check_backlight() {
static unsigned long last_bl_check = 0 ;
if (millis() - last_bl_check < 1000) return; // not time-critical
last_bl_check = millis();
if ((last_bl_check - last_active_time) > ((unsigned long)dim_backlight_inactive_time*60000)){
#ifdef DEBUG_BACKLIGHT
debug_serial_port->println(F("check_backlight: I'm asleep!"));
#endif //DEBUG_BACKLIGHT
if (keyer_power_led){
analogWrite(keyer_power_led,keyer_power_led_asleep_duty);
}
lcd.noBacklight();
} else {
#ifdef DEBUG_BACKLIGHT
debug_serial_port->println(F("check_backlight: I'm awake!"));
#endif //DEBUG_BACKLIGHT
if (keyer_power_led){
analogWrite(keyer_power_led,keyer_power_led_awake_duty);
}
lcd.backlight();
}
}
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
//-------------------------------------------------------------------------------------------------------
#ifdef FEATURE_DISPLAY
void service_display() {
@ -3453,6 +3505,9 @@ void service_display() {
}
} else {
if (lcd_scroll_buffer[y].charAt(x) > 0){
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.backlight();
#endif // FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.print(lcd_scroll_buffer[y].charAt(x));
}
x++;
@ -3603,6 +3658,9 @@ void lcd_clear() {
#ifdef FEATURE_DISPLAY
void lcd_center_print_timed(String lcd_print_string, byte row_number, unsigned int duration)
{
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.backlight();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.noCursor();//sp5iou 20180328
if (lcd_status != LCD_TIMED_MESSAGE) {
lcd_previous_status = lcd_status;
@ -3622,6 +3680,9 @@ void lcd_center_print_timed(String lcd_print_string, byte row_number, unsigned i
#ifdef FEATURE_DISPLAY
void clear_display_row(byte row_number)
{
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.backlight();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
lcd.noCursor();//sp5iou 20180328
for (byte x = 0; x < LCD_COLUMNS; x++) {
lcd.setCursor(x,row_number);
@ -3743,6 +3804,9 @@ void check_ps2_keyboard()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
if (ps2_keyboard_mode == PS2_KEYBOARD_NORMAL) {
switch (keystroke) {
@ -4313,6 +4377,9 @@ void check_ps2_keyboard()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
if (ps2_keyboard_mode == PS2_KEYBOARD_NORMAL) {
switch (keystroke) {
@ -5198,6 +5265,10 @@ void check_rotary_encoder(){
if (keyer_machine_mode == KEYER_COMMAND_MODE) speed_change_command_mode(step);
else speed_change(step);
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
// Start of Winkey Speed change mod for Rotary Encoder -- VE2EVN
#ifdef FEATURE_WINKEY_EMULATION
if ((primary_serial_port_mode == SERIAL_WINKEY_EMULATION) && (winkey_host_open)) {
@ -5235,6 +5306,9 @@ void check_sidetone_switch()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
if ( ss_read == HIGH ) {
configuration.sidetone_mode = SIDETONE_ON;
@ -5291,6 +5365,9 @@ void check_potentiometer()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
}
}
}
@ -6261,6 +6338,9 @@ void check_dit_paddle()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
manual_ptt_invoke = 0;
#ifdef FEATURE_MEMORIES
if (repeat_memory < 255) {
@ -6321,6 +6401,9 @@ void check_dah_paddle()
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
#ifdef FEATURE_MEMORIES
repeat_memory = 255;
#endif
@ -8993,6 +9076,9 @@ void check_buttons() {
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
}
#endif // FEATURE_BUTTONS
@ -9285,6 +9371,9 @@ void send_char(byte cw_char, byte omit_letterspace)
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
if ((cw_char == 10) || (cw_char == 13)) { return; } // don't attempt to send carriage return or line feed
@ -9706,6 +9795,9 @@ void service_send_buffer(byte no_print)
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
if ((send_buffer_array[0] > SERIAL_SEND_BUFFER_SPECIAL_START) && (send_buffer_array[0] < SERIAL_SEND_BUFFER_SPECIAL_END)) {
@ -12204,6 +12296,9 @@ void check_serial(){
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
#ifdef DEBUG_SERIAL_SEND_CW_CALLOUT
debug_serial_send_cw[0] = (incoming_serial_byte & 0xf0)>>4;
debug_serial_send_cw[1] = incoming_serial_byte & 0x0f;
@ -12251,6 +12346,9 @@ void check_serial(){
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
#ifdef DEBUG_SERIAL_SEND_CW_CALLOUT
debug_serial_send_cw[0] = (incoming_serial_byte & 0xf0)>>4;
debug_serial_send_cw[1] = incoming_serial_byte & 0x0f;
@ -17314,6 +17412,13 @@ void initialize_pins() {
}
#endif //FEATURE_SLEEP
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
if (keyer_power_led){
pinMode(keyer_power_led,OUTPUT);
analogWrite(keyer_power_led,keyer_power_led_awake_duty);
}
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
#ifdef FEATURE_SIDETONE_SWITCH
pinMode(SIDETONE_SWITCH,INPUT_PULLUP);
#endif //FEATURE_SIDETONE_SWITCH
@ -17574,6 +17679,9 @@ void service_cw_decoder() {
#ifdef FEATURE_SLEEP
last_activity_time = millis();
#endif //FEATURE_SLEEP
#ifdef FEATURE_LCD_BACKLIGHT_AUTO_DIM
last_active_time = millis();
#endif //FEATURE_LCD_BACKLIGHT_AUTO_DIM
} else {
if ((last_decode_time > 0) && (!space_sent) && ((millis() - last_decode_time) > ((1200/decoder_wpm)*CW_DECODER_SPACE_PRINT_THRESH))) { // should we send a space?

1
k3ng_keyer/keyer_debug.h
Wyświetl plik

@ -23,6 +23,7 @@
// #define DEBUG_CW_DECODER_WPM
// #define DEBUG_SERIAL_SEND_CW_CALLOUT
// #define DEBUG_SLEEP
// #define DEBUG_BACKLIGHT
// #define DEBUG_BUTTON_ARRAY
// #define DEBUG_USB
// #define DEBUG_USB_KEYBOARD

1
k3ng_keyer/keyer_features_and_options.h
Wyświetl plik

@ -36,6 +36,7 @@
// #define FEATURE_LCD_HD44780
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_fk_10.h
Wyświetl plik

@ -52,6 +52,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
#define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
#define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_fk_11.h
Wyświetl plik

@ -37,6 +37,7 @@
// #define FEATURE_LCD_HD44780
#define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
#define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_generic_STM32F103C.h
Wyświetl plik

@ -41,6 +41,7 @@ Generic STM32F103C "Blue Pill"
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_iz3gme.h
Wyświetl plik

@ -36,6 +36,7 @@
// #define FEATURE_LCD_HD44780
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_k5bcq.h
Wyświetl plik

@ -34,6 +34,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
#define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_maple_mini.h
Wyświetl plik

@ -48,6 +48,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_megakeyer.h
Wyświetl plik

@ -40,6 +40,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_mortty.h
Wyświetl plik

@ -32,6 +32,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_mortty_regular.h
Wyświetl plik

@ -32,6 +32,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_mortty_regular_with_potentiometer.h
Wyświetl plik

@ -32,6 +32,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_mortty_so2r.h
Wyświetl plik

@ -32,6 +32,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_mortty_so2r_with_potentiometer.h
Wyświetl plik

@ -31,6 +31,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_nanokeyer_rev_b.h
Wyświetl plik

@ -27,6 +27,7 @@
//#define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
//#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
//#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
//#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
//#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
//#define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_nanokeyer_rev_d.h
Wyświetl plik

@ -26,6 +26,7 @@
//#define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
//#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power
//#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
//#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
//#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
//#define FEATURE_USB_MOUSE

1
k3ng_keyer/keyer_features_and_options_open_interface.h
Wyświetl plik

@ -30,6 +30,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
//#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power
//#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
//#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
//#define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_opencwkeyer_mk2.h
Wyświetl plik

@ -36,6 +36,7 @@
// #define FEATURE_LCD_HD44780
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_test.h
Wyświetl plik

@ -46,6 +46,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
// #define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_test_everything.h
Wyświetl plik

@ -32,6 +32,7 @@
// #define FEATURE_LCD_I2C_FDEBRABANDER //https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library
#define FEATURE_CW_DECODER // https://github.com/k3ng/k3ng_cw_keyer/wiki/385-Feature:-CW-Decoder
#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_tinykeyer.h
Wyświetl plik

@ -19,6 +19,7 @@
//#define FEATURE_FARNSWORTH
//#define FEATURE_DL2SBA_BANKSWITCH // Switch memory banks feature as described here: http://dl2sba.com/index.php?option=com_content&view=article&id=131:nanokeyer&catid=15:shack&Itemid=27#english
//#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power
//#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
//#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
//#define FEATURE_DIT_DAH_BUFFER_CONTROL

1
k3ng_keyer/keyer_features_and_options_yaacwk.h
Wyświetl plik

@ -31,6 +31,7 @@
//#define FEATURE_LCD_FABO_PCF8574 // https://github.com/FaBoPlatform/FaBoLCD-PCF8574-Library
#define FEATURE_CW_DECODER
//#define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power
//#define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
//#define FEATURE_ROTARY_ENCODER // rotary encoder speed control
//#define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
//#define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

1
k3ng_keyer/keyer_features_and_options_yccc_so2r_mini.h
Wyświetl plik

@ -42,6 +42,7 @@
// #define FEATURE_LCD_HD44780
// #define FEATURE_CW_DECODER
// #define FEATURE_SLEEP // go to sleep after x minutes to conserve battery power (not compatible with Arduino DUE, may have mixed results with Mega and Mega ADK)
// #define FEATURE_LCD_BACKLIGHT_AUTO_DIM // turn off LCD backlight and/or dim Power Indicator LED after x minutes (LED requires a PWM pin)
// #define FEATURE_ROTARY_ENCODER // rotary encoder speed control
// #define FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING
// #define FEATURE_USB_MOUSE // Uncomment three lines in k3ng_keyer.ino (search for note_usb_uncomment_lines)

4
k3ng_keyer/keyer_pin_settings.h
Wyświetl plik

@ -111,6 +111,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_fk_10.h
Wyświetl plik

@ -101,6 +101,10 @@
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_fk_11.h
Wyświetl plik

@ -114,6 +114,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_generic_STM32F103C.h
Wyświetl plik

@ -119,6 +119,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_iz3gme.h
Wyświetl plik

@ -112,6 +112,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_k5bcq.h
Wyświetl plik

@ -112,6 +112,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_maple_mini.h
Wyświetl plik

@ -126,6 +126,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 6
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_megakeyer.h
Wyświetl plik

@ -112,6 +112,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_mortty.h
Wyświetl plik

@ -112,6 +112,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_mortty_regular.h
Wyświetl plik

@ -105,6 +105,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_mortty_regular_with_potentiometer.h
Wyświetl plik

@ -105,6 +105,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_mortty_so2r.h
Wyświetl plik

@ -105,6 +105,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_mortty_so2r_with_potentiometer.h
Wyświetl plik

@ -105,6 +105,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_nanokeyer_rev_b.h
Wyświetl plik

@ -36,6 +36,10 @@
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_nanokeyer_rev_d.h
Wyświetl plik

@ -35,6 +35,10 @@
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_open_interface.h
Wyświetl plik

@ -82,6 +82,10 @@
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_opencwkeyer_mk2.h
Wyświetl plik

@ -113,6 +113,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_test.h
Wyświetl plik

@ -114,6 +114,10 @@
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_test_everything.h
Wyświetl plik

@ -128,6 +128,10 @@
#define keyer_awake 13 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_tinykeyer.h
Wyświetl plik

@ -37,6 +37,10 @@
#define keyer_awake 8 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
/*
FEATURE_SIDETONE_SWITCH
Enabling this feature and an external toggle switch adds switch control for playing cw sidetone.

4
k3ng_keyer/keyer_pin_settings_yaacwk.h
Wyświetl plik

@ -94,6 +94,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0 // Goes active when keyer is awake, inactive when in sleep mode; change active and inactive states in keyer_settings file
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

4
k3ng_keyer/keyer_pin_settings_yccc_so2r_mini.h
Wyświetl plik

@ -127,6 +127,10 @@ FEATURE_SIDETONE_SWITCH
#define keyer_awake 0
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led 0 // must be a PWM-capable pin
#endif
#if defined(FEATURE_CAPACITIVE_PADDLE_PINS)
#define capactive_paddle_pin_inhibit_pin 0 // if this pin is defined and is set high, the capacitive paddle pins will switch to normal (non-capacitive) sensing mode
#endif

6
k3ng_keyer/keyer_settings.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -183,6 +184,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_fk_10.h
Wyświetl plik

@ -72,6 +72,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -206,6 +207,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_fk_11.h
Wyświetl plik

@ -53,6 +53,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -187,6 +188,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_generic_STM32F103C.h
Wyświetl plik

@ -58,6 +58,7 @@ GENERIC STM32F103C
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -193,6 +194,11 @@ GENERIC STM32F103C
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_iz3gme.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_k5bcq.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_maple_mini.h
Wyświetl plik

@ -64,6 +64,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -198,6 +199,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_megakeyer.h
Wyświetl plik

@ -56,6 +56,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -190,6 +191,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_mortty.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_mortty_regular.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_mortty_regular_with_potentiometer.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_mortty_so2r.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_mortty_so2r_with_potentiometer.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_nanokeyer_rev_b.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -175,6 +176,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_nanokeyer_rev_d.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -176,6 +177,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_open_interface.h
Wyświetl plik

@ -53,6 +53,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -178,6 +179,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_opencwkeyer_mk2.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_test.h
Wyświetl plik

@ -64,6 +64,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -197,6 +198,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
#define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
#define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_test_everything.h
Wyświetl plik

@ -61,6 +61,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -194,6 +195,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
#define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
#define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_tinykeyer.h
Wyświetl plik

@ -52,6 +52,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -176,6 +177,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_yaacwk.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -184,6 +185,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}

6
k3ng_keyer/keyer_settings_yccc_so2r_mini.h
Wyświetl plik

@ -51,6 +51,7 @@
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
#define default_autospace_timing_factor 2.0 // "factory default" setting
@ -185,6 +186,11 @@
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
#endif
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
#endif
#if defined(FEATURE_ETHERNET)
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}