msgid ""
msgstr ""
"Project-Id-Version: inkstitch\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
"POT-Creation-Date: 2021-03-16 00:42+0000\n"
"PO-Revision-Date: 2021-03-21 00:47\n"
"Last-Translator: \n"
"Language-Team: Norwegian\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.9.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: easygettext\n"
"Project-Id-Version: \n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Crowdin-Project: inkstitch\n"
"X-Crowdin-Project-ID: 299419\n"
"X-Crowdin-Language: no\n"
"X-Crowdin-File: /main/messages.po\n"
"X-Crowdin-File-ID: 8\n"
"Language: no_NO\n"

#. name of font in fonts/baumans
#: inkstitch-fonts-metadata.py:2
msgid "Baumans"
msgstr ""

#. name of font in fonts/chopin
#: inkstitch-fonts-metadata.py:6
msgid "Chopin Script"
msgstr ""

#. name of font in fonts/dejavufont
#: inkstitch-fonts-metadata.py:10
msgid "Dejavu Serif Semi-condensed"
msgstr ""

#. description of font in fonts/dejavufont
#: inkstitch-fonts-metadata.py:12
#, python-format
msgid "The capital em is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
msgstr ""

#. name of font in fonts/geneva_rounded
#: inkstitch-fonts-metadata.py:14
msgid "Geneva Simple Sans Rounded"
msgstr ""

#. description of font in fonts/geneva_rounded
#: inkstitch-fonts-metadata.py:16
msgid "Suitable for small fonts (8 to 20 mm)"
msgstr ""

#. name of font in fonts/geneva_simple
#: inkstitch-fonts-metadata.py:18
msgid "Geneva Simple Sans"
msgstr ""

#. description of font in fonts/geneva_simple
#: inkstitch-fonts-metadata.py:20
msgid "Suitable for small fonts (6 to 15mm)"
msgstr ""

#. name of font in fonts/lobster
#: inkstitch-fonts-metadata.py:22
msgid "Lobster Two Bold Italic"
msgstr ""

#. name of font in fonts/medium_font
#: inkstitch-fonts-metadata.py:26
msgid "Ink/Stitch Medium Font"
msgstr ""

#. description of font in fonts/medium_font
#: inkstitch-fonts-metadata.py:28
#, python-format
msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
msgstr ""

#. name of font in fonts/small_font
#: inkstitch-fonts-metadata.py:30
msgid "Ink/Stitch Small Font"
msgstr ""

#. description of font in fonts/small_font
#: inkstitch-fonts-metadata.py:32
#, python-format
msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
msgstr ""

#. name of font in fonts/tt_directors
#: inkstitch-fonts-metadata.py:34
msgid "TT Directors"
msgstr ""

#. description of font in fonts/tt_directors
#: inkstitch-fonts-metadata.py:36
msgid "A font suited for directing"
msgstr ""

#. name of font in fonts/tt_masters
#: inkstitch-fonts-metadata.py:38
msgid "TT Masters"
msgstr ""

#. description of font in fonts/tt_masters
#: inkstitch-fonts-metadata.py:40
msgid "A font suited for heavy typing :)"
msgstr ""

#: inkstitch.py:51
msgid "Ink/Stitch cannot read your SVG file. This is often the case when you use a file which has been created with Adobe Illustrator."
msgstr ""

#: inkstitch.py:54
msgid "Try to import the file into Inkscape through 'File > Import...' (Ctrl+I)"
msgstr ""

#: inkstitch.py:65
msgid "Ink/Stitch experienced an unexpected error."
msgstr ""

#: inkstitch.py:66
msgid "If you'd like to help, please file an issue at https://github.com/inkstitch/inkstitch/issues and include the entire error description below:"
msgstr ""

#. command attached to an object
#: lib/commands.py:21
msgid "Fill stitch starting position"
msgstr "Fyll startposisjon"

#. command attached to an object
#: lib/commands.py:24
msgid "Fill stitch ending position"
msgstr "Fyll sluttposisjon"

#. command attached to an object
#: lib/commands.py:27
msgid "Auto-route satin stitch starting position"
msgstr "Sett satin stitch startposisjon automatisk"

#. command attached to an object
#: lib/commands.py:30
msgid "Auto-route satin stitch ending position"
msgstr "Sett satin stitch sluttposisjon automatisk"

#. command attached to an object
#: lib/commands.py:33
msgid "Stop (pause machine) after sewing this object"
msgstr "Stopp (pause maskina) når objektet er ferdig"

#. command attached to an object
#: lib/commands.py:36
msgid "Trim thread after sewing this object"
msgstr "Klipp tråden når objektet er ferdig"

#. command attached to an object
#: lib/commands.py:39
msgid "Ignore this object (do not stitch)"
msgstr "Ignorer dette objektet (ikkje sy)"

#. command attached to an object
#: lib/commands.py:42
msgid "Satin cut point (use with Cut Satin Column)"
msgstr ""

#. command that affects a layer
#: lib/commands.py:46
msgid "Ignore layer (do not stitch any objects in this layer)"
msgstr ""

#. command that affects entire document
#: lib/commands.py:49
msgid "Origin for exported embroidery files"
msgstr ""

#. command that affects entire document
#: lib/commands.py:52
msgid "Jump destination for Stop commands (a.k.a. \"Frame Out position\")."
msgstr ""

#: lib/commands.py:210
#, python-format
msgid "Error: there is more than one %(command)s command in the document, but there can only be one.  Please remove all but one."
msgstr ""

#. This is a continuation of the previous error message, letting the user know
#. what command we're talking about since we don't normally expose the actual
#. command name to them.  Contents of %(description)s are in a separate
#. translation
#. string.
#: lib/commands.py:217
#, python-format
msgid "%(command)s: %(description)s"
msgstr ""

#: lib/commands.py:290 lib/commands.py:401 lib/extensions/layer_commands.py:29
msgid "Ink/Stitch Command"
msgstr ""

#. : the name of the line that connects a command to the object it applies to
#: lib/commands.py:315
msgid "connector"
msgstr ""

#. : the name of a command symbol (example: scissors icon for trim command)
#: lib/commands.py:332
msgid "command marker"
msgstr ""

#: lib/elements/auto_fill.py:16
msgid "Small Fill"
msgstr ""

#: lib/elements/auto_fill.py:17
msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead."
msgstr ""

#: lib/elements/auto_fill.py:23 lib/elements/auto_fill.py:139
msgid "Expand"
msgstr ""

#: lib/elements/auto_fill.py:24
msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead."
msgstr ""

#: lib/elements/auto_fill.py:29 lib/elements/auto_fill.py:116
msgid "Inset"
msgstr ""

#: lib/elements/auto_fill.py:30
msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead."
msgstr ""

#: lib/elements/auto_fill.py:35
msgid "AutoFill"
msgstr ""

#: lib/elements/auto_fill.py:38
msgid "Automatically routed fill stitching"
msgstr ""

#: lib/elements/auto_fill.py:58
msgid "Running stitch length (traversal between sections)"
msgstr ""

#: lib/elements/auto_fill.py:59
msgid "Length of stitches around the outline of the fill region used when moving from section to section."
msgstr ""

#: lib/elements/auto_fill.py:67
msgid "Underlay"
msgstr ""

#: lib/elements/auto_fill.py:67 lib/elements/auto_fill.py:76
#: lib/elements/auto_fill.py:98 lib/elements/auto_fill.py:109
#: lib/elements/auto_fill.py:119 lib/elements/auto_fill.py:131
#: lib/elements/auto_fill.py:165
msgid "AutoFill Underlay"
msgstr ""

#: lib/elements/auto_fill.py:73
msgid "Fill angle"
msgstr ""

#: lib/elements/auto_fill.py:74
msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers."
msgstr ""

#: lib/elements/auto_fill.py:95
msgid "Row spacing"
msgstr ""

#: lib/elements/auto_fill.py:96
msgid "default: 3x fill row spacing"
msgstr ""

#: lib/elements/auto_fill.py:106
msgid "Max stitch length"
msgstr ""

#: lib/elements/auto_fill.py:107
msgid "default: equal to fill max stitch length"
msgstr ""

#: lib/elements/auto_fill.py:117
msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
msgstr ""

#: lib/elements/auto_fill.py:128 lib/elements/fill.py:69
msgid "Skip last stitch in each row"
msgstr ""

#: lib/elements/auto_fill.py:129 lib/elements/fill.py:70
msgid "The last stitch in each row is quite close to the first stitch in the next row.  Skipping it decreases stitch count and density."
msgstr ""

#: lib/elements/auto_fill.py:140
msgid "Expand the shape before fill stitching, to compensate for gaps between shapes."
msgstr ""

#: lib/elements/auto_fill.py:149 lib/elements/auto_fill.py:161
msgid "Underpath"
msgstr ""

#: lib/elements/auto_fill.py:150 lib/elements/auto_fill.py:162
msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
msgstr ""

#: lib/elements/auto_fill.py:248
msgid "Error during autofill!  This means that there is a problem with Ink/Stitch."
msgstr ""

#. this message is followed by a URL:
#. https://github.com/inkstitch/inkstitch/issues/new
#: lib/elements/auto_fill.py:251
msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: "
msgstr ""

#: lib/elements/clone.py:22
msgid "Clone Object"
msgstr ""

#: lib/elements/clone.py:23
msgid "There are one or more clone objects in this document.  Ink/Stitch can work with single clones, but you are limited to set a very few parameters. "
msgstr ""

#: lib/elements/clone.py:26
msgid "If you want to convert the clone into a real element, follow these steps:"
msgstr ""

#: lib/elements/clone.py:27
msgid "* Select the clone"
msgstr ""

#: lib/elements/clone.py:28 lib/elements/clone.py:39
msgid "* Run: Edit > Clone > Unlink Clone (Alt+Shift+D)"
msgstr ""

#: lib/elements/clone.py:33
msgid "Clone is not embroiderable"
msgstr ""

#: lib/elements/clone.py:34
msgid "There are one ore more clone objects in this document. A clone must be a direct child of an embroiderable element. Ink/Stitch cannot embroider clones of groups or other not embroiderable elements (text or image)."
msgstr ""

#: lib/elements/clone.py:37
msgid "Convert the clone into a real element:"
msgstr ""

#: lib/elements/clone.py:38
msgid "* Select the clone."
msgstr ""

#: lib/elements/clone.py:53
msgid "Clone"
msgstr ""

#: lib/elements/clone.py:59
msgid "Custom fill angle"
msgstr ""

#: lib/elements/clone.py:60
msgid "This setting will apply a custom fill angle for the clone."
msgstr ""

#: lib/elements/element.py:246
msgid "Allow lock stitches"
msgstr ""

#: lib/elements/element.py:247
msgid "Tie thread at the beginning and/or end of this object. Manual stitch will not add lock stitches."
msgstr ""

#. options to allow lock stitch before and after objects
#: lib/elements/element.py:251
msgid "Both"
msgstr ""

#: lib/elements/element.py:251
msgid "Before"
msgstr ""

#: lib/elements/element.py:251
msgid "After"
msgstr ""

#: lib/elements/element.py:251
msgid "Neither"
msgstr ""

#: lib/elements/element.py:293
#, python-format
msgid "Object %(id)s has an empty 'd' attribute.  Please delete this object from your document."
msgstr ""

#: lib/elements/element.py:325
#, python-format
msgid "%(id)s has more than one command of type '%(command)s' linked to it"
msgstr ""

#. used when showing an error message to the user such as
#. "Some Path (path1234): error: satin column: One or more of the rungs doesn't
#. intersect both rails."
#: lib/elements/element.py:382
msgid "error:"
msgstr ""

#: lib/elements/empty_d_object.py:7
msgid "Empty D-Attribute"
msgstr ""

#: lib/elements/empty_d_object.py:8
msgid "There is an invalid path object in the document, the d-attribute is missing."
msgstr ""

#: lib/elements/empty_d_object.py:10
msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..."
msgstr ""

#: lib/elements/fill.py:17
msgid "Unconnected"
msgstr ""

#: lib/elements/fill.py:18
msgid "Fill: This object is made up of unconnected shapes.  This is not allowed because Ink/Stitch doesn't know what order to stitch them in.  Please break this object up into separate shapes."
msgstr ""

#: lib/elements/fill.py:22 lib/elements/fill.py:30
msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects"
msgstr ""

#: lib/elements/fill.py:27
msgid "Border crosses itself"
msgstr ""

#: lib/elements/fill.py:28
msgid "Fill: Shape is not valid.  This can happen if the border crosses over itself."
msgstr ""

#: lib/elements/fill.py:35
msgid "Fill"
msgstr ""

#: lib/elements/fill.py:42
msgid "Manually routed fill stitching"
msgstr ""

#: lib/elements/fill.py:43
msgid "AutoFill is the default method for generating fill stitching."
msgstr ""

#: lib/elements/fill.py:52
msgid "Angle of lines of stitches"
msgstr ""

#: lib/elements/fill.py:53
msgid "The angle increases in a counter-clockwise direction.  0 is horizontal.  Negative angles are allowed."
msgstr ""

#: lib/elements/fill.py:80
msgid "Flip fill (start right-to-left)"
msgstr ""

#: lib/elements/fill.py:81
msgid "The flip option can help you with routing your stitch path.  When you enable flip, stitching goes from right-to-left instead of left-to-right."
msgstr ""

#: lib/elements/fill.py:90
msgid "Spacing between rows"
msgstr ""

#: lib/elements/fill.py:91
msgid "Distance between rows of stitches."
msgstr ""

#: lib/elements/fill.py:104
msgid "Maximum fill stitch length"
msgstr ""

#: lib/elements/fill.py:105
msgid "The length of each stitch in a row.  Shorter stitch may be used at the start or end of a row."
msgstr ""

#: lib/elements/fill.py:114
msgid "Stagger rows this many times before repeating"
msgstr ""

#: lib/elements/fill.py:115
msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position."
msgstr ""

#: lib/elements/image.py:8
msgid "Image"
msgstr ""

#: lib/elements/image.py:9
msgid "Ink/Stitch can't work with objects like images."
msgstr ""

#: lib/elements/image.py:11
msgid "* Convert your image into a path: Path > Trace Bitmap... (Shift+Alt+B) (further steps might be required)"
msgstr ""

#: lib/elements/image.py:13
msgid "* Alternatively redraw the image with the pen (P) or bezier (B) tool"
msgstr ""

#: lib/elements/polyline.py:12
msgid "Polyline Object"
msgstr ""

#: lib/elements/polyline.py:13
msgid "This object is an SVG PolyLine.  Ink/Stitch can work with this shape, but you can't edit it in Inkscape.  Convert it to a manual stitch path to allow editing."
msgstr ""

#: lib/elements/polyline.py:17 lib/elements/satin_column.py:19
msgid "* Select this object."
msgstr ""

#: lib/elements/polyline.py:18
msgid "* Do Path > Object to Path."
msgstr ""

#: lib/elements/polyline.py:19
msgid "* Optional: Run the Params extension and check the \"manual stitch\" box."
msgstr ""

#: lib/elements/polyline.py:39
msgid "Manual stitch along path"
msgstr ""

#: lib/elements/satin_column.py:16
msgid "Satin column has fill"
msgstr ""

#: lib/elements/satin_column.py:17
msgid "Satin column: Object has a fill (but should not)"
msgstr ""

#: lib/elements/satin_column.py:20
msgid "* Open the Fill and Stroke panel"
msgstr ""

#: lib/elements/satin_column.py:21
msgid "* Open the Fill tab"
msgstr ""

#: lib/elements/satin_column.py:22
msgid "* Disable the Fill"
msgstr ""

#: lib/elements/satin_column.py:23
msgid "* Alternative: open Params and switch this path to Stroke to disable Satin Column mode"
msgstr ""

#: lib/elements/satin_column.py:28
msgid "Too few subpaths"
msgstr ""

#: lib/elements/satin_column.py:29
msgid "Satin column: Object has too few subpaths.  A satin column should have at least two subpaths (the rails)."
msgstr ""

#: lib/elements/satin_column.py:31
msgid "* Add another subpath (select two rails and do Path > Combine)"
msgstr ""

#: lib/elements/satin_column.py:32
msgid "* Convert to running stitch or simple satin (Params extension)"
msgstr ""

#: lib/elements/satin_column.py:37
msgid "Unequal number of points"
msgstr ""

#: lib/elements/satin_column.py:38
msgid "Satin column: There are no rungs and rails have an an unequal number of points."
msgstr ""

#: lib/elements/satin_column.py:40
msgid "The easiest way to solve this issue is to add one or more rungs. "
msgstr ""

#: lib/elements/satin_column.py:41
msgid "Rungs control the stitch direction in satin columns."
msgstr ""

#: lib/elements/satin_column.py:42
msgid "* With the selected object press \"P\" to activate the pencil tool."
msgstr ""

#: lib/elements/satin_column.py:43
msgid "* Hold \"Shift\" while drawing the rung."
msgstr ""

#: lib/elements/satin_column.py:47
msgid "Each rung should intersect both rails once."
msgstr ""

#: lib/elements/satin_column.py:51
msgid "Rung doesn't intersect rails"
msgstr ""

#: lib/elements/satin_column.py:52
msgid "Satin column: A rung doesn't intersect both rails."
msgstr ""

#: lib/elements/satin_column.py:56
msgid "Rung intersects too many times"
msgstr ""

#: lib/elements/satin_column.py:57
msgid "Satin column: A rung intersects a rail more than once."
msgstr ""

#: lib/elements/satin_column.py:61
msgid "Satin Column"
msgstr ""

#: lib/elements/satin_column.py:67
msgid "Custom satin column"
msgstr ""

#: lib/elements/satin_column.py:73
msgid "\"E\" stitch"
msgstr ""

#: lib/elements/satin_column.py:83 lib/elements/stroke.py:56
msgid "Zig-zag spacing (peak-to-peak)"
msgstr ""

#: lib/elements/satin_column.py:84
msgid "Peak-to-peak distance between zig-zags."
msgstr ""

#: lib/elements/satin_column.py:95
msgid "Pull compensation"
msgstr ""

#: lib/elements/satin_column.py:96
msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape.  This setting expands each pair of needle penetrations outward from the center of the satin column."
msgstr ""

#: lib/elements/satin_column.py:108
msgid "Contour underlay"
msgstr ""

#: lib/elements/satin_column.py:108 lib/elements/satin_column.py:115
#: lib/elements/satin_column.py:124
msgid "Contour Underlay"
msgstr ""

#: lib/elements/satin_column.py:115 lib/elements/satin_column.py:139
msgid "Stitch length"
msgstr ""

#: lib/elements/satin_column.py:121
msgid "Contour underlay inset amount"
msgstr ""

#: lib/elements/satin_column.py:122
msgid "Shrink the outline, to prevent the underlay from showing around the outside of the satin column."
msgstr ""

#: lib/elements/satin_column.py:132
msgid "Center-walk underlay"
msgstr ""

#: lib/elements/satin_column.py:132 lib/elements/satin_column.py:139
msgid "Center-Walk Underlay"
msgstr ""

#: lib/elements/satin_column.py:144
msgid "Zig-zag underlay"
msgstr ""

#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:153
#: lib/elements/satin_column.py:164
msgid "Zig-zag Underlay"
msgstr ""

#: lib/elements/satin_column.py:150
msgid "Zig-Zag spacing (peak-to-peak)"
msgstr ""

#: lib/elements/satin_column.py:151
msgid "Distance between peaks of the zig-zags."
msgstr ""

#: lib/elements/satin_column.py:161
msgid "Inset amount"
msgstr ""

#: lib/elements/satin_column.py:162
msgid "default: half of contour underlay inset"
msgstr ""

#: lib/elements/stroke.py:15
msgid "Stroke"
msgstr ""

#: lib/elements/stroke.py:18
msgid "Satin stitch along paths"
msgstr ""

#: lib/elements/stroke.py:32
msgid "Running stitch length"
msgstr ""

#: lib/elements/stroke.py:33
msgid "Length of stitches in running stitch mode."
msgstr ""

#: lib/elements/stroke.py:44
msgid "Bean stitch number of repeats"
msgstr ""

#: lib/elements/stroke.py:45
msgid "Backtrack each stitch this many times.  A value of 1 would triple each stitch (forward, back, forward).  A value of 2 would quintuple each stitch, etc.  Only applies to running stitch."
msgstr ""

#: lib/elements/stroke.py:57
msgid "Length of stitches in zig-zag mode."
msgstr ""

#: lib/elements/stroke.py:68
msgid "Repeats"
msgstr ""

#: lib/elements/stroke.py:69
msgid "Defines how many times to run down and back along the path."
msgstr ""

#: lib/elements/stroke.py:102
msgid "Manual stitch placement"
msgstr ""

#: lib/elements/stroke.py:103
msgid "Stitch every node in the path.  Stitch length and zig-zag spacing are ignored."
msgstr ""

#: lib/elements/stroke.py:137
msgid "Legacy running stitch setting detected!\n\n"
"It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated.  Instead, please set your stroke to be dashed to indicate running stitch.  Any kind of dash will work."
msgstr ""

#: lib/elements/text.py:8 lib/extensions/lettering.py:63
msgid "Text"
msgstr ""

#: lib/elements/text.py:9
msgid "Ink/Stitch cannot work with objects like text."
msgstr ""

#: lib/elements/text.py:11
msgid "* Text: Create your own letters or try the lettering tool:"
msgstr ""

#: lib/elements/text.py:12
msgid "- Extensions > Ink/Stitch > Lettering"
msgstr ""

#: lib/extensions/auto_satin.py:30
msgid "Please ensure that at most one start and end command is attached to the selected satin columns."
msgstr ""

#. auto-route satin columns extension
#: lib/extensions/auto_satin.py:44
msgid "Please select one or more satin columns."
msgstr ""

#: lib/extensions/auto_satin.py:49
msgid "Please select at least one satin column."
msgstr ""

#. This was previously: "No embroiderable paths selected."
#: lib/extensions/base.py:128
msgid "Ink/Stitch doesn't know how to work with any of the objects you've selected."
msgstr ""

#: lib/extensions/base.py:130
msgid "There are no objects in the entire document that Ink/Stitch knows how to work with."
msgstr ""

#: lib/extensions/base.py:132
msgid "Tip: Select some objects and use Path -> Object to Path to convert them to paths."
msgstr ""

#: lib/extensions/break_apart.py:26
msgid "Please select one or more fill areas to break apart."
msgstr ""

#: lib/extensions/cleanup.py:32 lib/extensions/cleanup.py:44
#, python-format
msgid "%s elements removed"
msgstr ""

#: lib/extensions/convert_to_satin.py:31
msgid "Please select at least one line to convert to a satin column."
msgstr ""

#. : Convert To Satin extension, user selected one or more objects that were
#. not lines.
#: lib/extensions/convert_to_satin.py:36
msgid "Only simple lines may be converted to satin columns."
msgstr ""

#: lib/extensions/convert_to_satin.py:130
msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again."
msgstr ""

#: lib/extensions/cut_satin.py:15
msgid "Please select one or more satin columns to cut."
msgstr ""

#. will have the satin's id prepended, like this:
#. path12345: error: this satin column does not ...
#: lib/extensions/cut_satin.py:25
msgid "this satin column does not have a \"satin column cut point\" command attached to it. Please use the \"Attach commands\" extension and attach the \"Satin Column cut point\" command first."
msgstr ""

#: lib/extensions/flip.py:23
msgid "Please select one or more satin columns to flip."
msgstr ""

#: lib/extensions/import_threadlist.py:28
msgid "File not found."
msgstr ""

#: lib/extensions/import_threadlist.py:31
msgid "The filepath specified is not a file but a dictionary.\n"
"Please choose a threadlist file to import."
msgstr ""

#: lib/extensions/import_threadlist.py:41
msgid "Couldn't find any matching colors in the file."
msgstr ""

#: lib/extensions/import_threadlist.py:43
msgid "Please try to import as \"other threadlist\" and specify a color palette below."
msgstr ""

#: lib/extensions/import_threadlist.py:45
msgid "Please chose an other color palette for your design."
msgstr ""

#: lib/extensions/layer_commands.py:18
msgid "Please choose one or more commands to add."
msgstr ""

#: lib/extensions/lettering.py:32 lib/extensions/lettering.py:409
msgid "Ink/Stitch Lettering"
msgstr ""

#: lib/extensions/lettering.py:39
msgid "Font"
msgstr ""

#: lib/extensions/lettering.py:51
msgid "Options"
msgstr ""

#: lib/extensions/lettering.py:56
msgid "Stitch lines of text back and forth"
msgstr ""

#: lib/extensions/lettering.py:59
msgid "Add trims"
msgstr ""

#: lib/extensions/lettering.py:68 lib/extensions/params.py:340
#: print/templates/custom-page.html:23 print/templates/custom-page.html:27
#: print/templates/custom-page.html:33 print/templates/ui.html:92
#: print/templates/ui.html:96 print/templates/ui.html:102
#: electron/src/renderer/components/InstallPalettes.vue:20
#: electron/src/renderer/components/InstallPalettes.vue:58
msgid "Cancel"
msgstr ""

#: lib/extensions/lettering.py:72 lib/extensions/params.py:347
msgid "Apply and Quit"
msgstr ""

#: lib/extensions/lettering.py:139
msgid "Unable to find any fonts!  Please try reinstalling Ink/Stitch."
msgstr ""

#: lib/extensions/lettering.py:213
msgid "This font has no available font variant. Please update or remove the font."
msgstr ""

#. The user has chosen to scale the text by some percentage
#. (50%, 200%, etc).  If you need to use the percentage symbol,
#. make sure to double it (%%).
#: lib/extensions/lettering.py:255
#, python-format
msgid "Text scale %s%%"
msgstr ""

#: lib/extensions/lettering.py:398
msgid "Please select only one block of text."
msgstr ""

#: lib/extensions/lettering.py:401
msgid "You've selected objects that were not created by the Lettering extension.  Please clear your selection or select different objects before running Lettering again."
msgstr ""

#: lib/extensions/lettering_custom_font_dir.py:22
msgid "Please specify the directory of your custom fonts."
msgstr ""

#: lib/extensions/lettering_generate_json.py:32
msgid "Please specify a font file."
msgstr ""

#: lib/extensions/object_commands.py:16
msgid "Please select one or more objects to which to attach commands."
msgstr ""

#: lib/extensions/object_commands.py:24
msgid "Please choose one or more commands to attach."
msgstr ""

#: lib/extensions/params.py:200
msgid "These settings will be applied to 1 object."
msgstr ""

#: lib/extensions/params.py:202
#, python-format
msgid "These settings will be applied to %d objects."
msgstr ""

#: lib/extensions/params.py:205
msgid "Some settings had different values across objects.  Select a value from the dropdown or enter a new one."
msgstr ""

#: lib/extensions/params.py:209
#, python-format
msgid "Disabling this tab will disable the following %d tabs."
msgstr ""

#: lib/extensions/params.py:211
msgid "Disabling this tab will disable the following tab."
msgstr ""

#: lib/extensions/params.py:214
#, python-format
msgid "Enabling this tab will disable %s and vice-versa."
msgstr ""

#: lib/extensions/params.py:244
msgid "Inkscape objects"
msgstr ""

#: lib/extensions/params.py:305
msgid "Click to force this parameter to be saved when you click \"Apply and Quit\""
msgstr ""

#: lib/extensions/params.py:313
msgid "This parameter will be saved when you click \"Apply and Quit\""
msgstr ""

#: lib/extensions/params.py:329
msgid "Embroidery Params"
msgstr ""

#: lib/extensions/params.py:344
msgid "Use Last Settings"
msgstr ""

#: lib/extensions/troubleshoot.py:43
msgid "All selected shapes are valid! "
msgstr ""

#: lib/extensions/troubleshoot.py:45
msgid "If you are still having trouble with a shape not being embroidered, check if it is in a layer with an ignore command."
msgstr ""

#: lib/extensions/troubleshoot.py:71
msgid "Invalid Pointer"
msgstr ""

#: lib/extensions/troubleshoot.py:80 templates/lettering_generate_json.xml:20
msgid "Description"
msgstr ""

#: lib/extensions/troubleshoot.py:102 lib/extensions/troubleshoot.py:160
#: templates/cleanup.xml:17 templates/remove_embroidery_settings.xml:16
#: templates/troubleshoot.xml:10
msgid "Troubleshoot"
msgstr ""

#: lib/extensions/troubleshoot.py:118 lib/extensions/troubleshoot.py:167
msgid "Errors"
msgstr ""

#: lib/extensions/troubleshoot.py:127 lib/extensions/troubleshoot.py:171
msgid "Warnings"
msgstr ""

#: lib/extensions/troubleshoot.py:136
msgid "Type Warnings"
msgstr ""

#: lib/extensions/troubleshoot.py:168
msgid "Problems that will prevent the shape from being embroidered."
msgstr ""

#: lib/extensions/troubleshoot.py:172
msgid "These are problems that won't prevent the shape from being embroidered. You should consider to fix the warning, but if you don't, Ink/Stitch will do its best to process the object."
msgstr ""

#: lib/extensions/troubleshoot.py:177
msgid "Object Type Warnings"
msgstr ""

#: lib/extensions/troubleshoot.py:178
msgid "Ink/Stitch only knows how to works with paths and ignores everything else. You might want these shapes to be ignored, but if you don't, follow the instructions to change this behaviour."
msgstr ""

#: lib/extensions/troubleshoot.py:195
msgid "It is possible, that one object contains more than one error, yet there will be only one pointer per object.  Run this function again, when further errors occur.  Remove pointers by deleting the layer named \"Troubleshoot\" through the objects panel (Object -> Objects...)."
msgstr ""

#: lib/extensions/zip.py:57
msgid "threadlist"
msgstr ""

#: lib/extensions/zip.py:66
msgid "No embroidery file formats selected."
msgstr ""

#: lib/extensions/zip.py:94
msgid "Design Details"
msgstr ""

#: lib/extensions/zip.py:97
msgid "Title"
msgstr ""

#: lib/extensions/zip.py:98
msgid "Size"
msgstr ""

#: lib/extensions/zip.py:99
msgid "Stitches"
msgstr ""

#: lib/extensions/zip.py:100
msgid "Colors"
msgstr ""

#: lib/extensions/zip.py:102
msgid "Thread Order"
msgstr ""

#: lib/extensions/zip.py:115
msgid "Thread Used"
msgstr ""

#: lib/gui/presets.py:47
msgid "Presets"
msgstr ""

#: lib/gui/presets.py:53
msgid "Load"
msgstr ""

#: lib/gui/presets.py:56
msgid "Add"
msgstr ""

#: lib/gui/presets.py:59
msgid "Overwrite"
msgstr ""

#: lib/gui/presets.py:62
msgid "Delete"
msgstr ""

#: lib/gui/presets.py:121
msgid "Please enter or select a preset name first."
msgstr ""

#: lib/gui/presets.py:121 lib/gui/presets.py:127 lib/gui/presets.py:143
msgid "Preset"
msgstr ""

#: lib/gui/presets.py:127
#, python-format
msgid "Preset \"%s\" not found."
msgstr ""

#: lib/gui/presets.py:143
#, python-format
msgid "Preset \"%s\" already exists.  Please use another name or press \"Overwrite\""
msgstr ""

#: lib/gui/simulator.py:15 electron/src/renderer/assets/js/simulator.js:132
msgid "JUMP"
msgstr ""

#: lib/gui/simulator.py:15 electron/src/renderer/assets/js/simulator.js:135
msgid "TRIM"
msgstr ""

#. #-#-#-#-#  messages-babel.po (PROJECT VERSION)  #-#-#-#-#
#. command label at bottom of simulator window
#: lib/gui/simulator.py:15 templates/output_params_txt.xml:14
#: electron/src/renderer/assets/js/simulator.js:129
msgid "STITCH"
msgstr ""

#: lib/gui/simulator.py:15 templates/output_params_txt.xml:16
#: electron/src/renderer/assets/js/simulator.js:141
msgid "COLOR CHANGE"
msgstr ""

#: lib/gui/simulator.py:15 templates/output_params_txt.xml:18
#: electron/src/renderer/assets/js/simulator.js:138
msgid "STOP"
msgstr ""

#: lib/gui/simulator.py:47
msgid "Slow down (arrow down)"
msgstr ""

#: lib/gui/simulator.py:50
msgid "Speed up (arrow up)"
msgstr ""

#: lib/gui/simulator.py:53
msgid "Go on step backward (-)"
msgstr ""

#: lib/gui/simulator.py:56
msgid "Go on step forward (+)"
msgstr ""

#: lib/gui/simulator.py:59
msgid "Switch direction (arrow left | arrow right)"
msgstr ""

#: lib/gui/simulator.py:60 lib/gui/simulator.py:236 lib/gui/simulator.py:243
#: electron/src/renderer/components/Simulator.vue:29
msgid "Pause"
msgstr ""

#: lib/gui/simulator.py:62
msgid "Pause (P)"
msgstr ""

#: lib/gui/simulator.py:63
msgid "Restart"
msgstr ""

#: lib/gui/simulator.py:65
msgid "Restart (R)"
msgstr ""

#: lib/gui/simulator.py:66
msgid "O"
msgstr ""

#: lib/gui/simulator.py:68
msgid "Display needle penetration point (O)"
msgstr ""

#: lib/gui/simulator.py:69
msgid "Quit"
msgstr ""

#: lib/gui/simulator.py:71
msgid "Quit (Q)"
msgstr ""

#: lib/gui/simulator.py:183
#, python-format
msgid "Speed: %d stitches/sec"
msgstr ""

#: lib/gui/simulator.py:239 lib/gui/simulator.py:267
msgid "Start"
msgstr ""

#: lib/gui/simulator.py:813 lib/gui/simulator.py:825
msgid "Preview"
msgstr ""

#: lib/gui/simulator.py:829
msgid "Internal Error"
msgstr ""

#: lib/gui/simulator.py:858
msgid "Embroidery Simulation"
msgstr ""

#. If you translate this string, that will tell Ink/Stitch to
#. generate menu items for this language in Inkscape's "Extensions"
#. menu.
#: lib/inx/utils.py:81
msgid "Generate INX files"
msgstr ""

#: lib/lettering/font.py:153
#, python-format
msgid "The font '%s' has no variants."
msgstr ""

#. low-level file error.  %(error)s is (hopefully?) translated by
#. the user's system automatically.
#: lib/output.py:96
#, python-format
msgid "Error writing to %(path)s: %(error)s"
msgstr ""

#: lib/stitches/auto_satin.py:653
msgid "Auto-Satin"
msgstr ""

#. Label for a satin column created by Auto-Route Satin Columns and Lettering
#. extensions
#: lib/stitches/auto_satin.py:700
#, python-format
msgid "AutoSatin %d"
msgstr ""

#. Label for running stitch (underpathing) created by Auto-Route Satin Columns
#. amd Lettering extensions
#: lib/stitches/auto_satin.py:703
#, python-format
msgid "AutoSatin Running Stitch %d"
msgstr ""

#: lib/svg/rendering.py:219
msgid "Stitch Plan"
msgstr ""

#: lib/svg/units.py:13
#, python-format
msgid "parseLengthWithUnits: unknown unit %s"
msgstr ""

#: lib/utils/version.py:14
#, python-format
msgid "Ink/Stitch Version: %s"
msgstr ""

#: lib/utils/version.py:16
msgid "Ink/Stitch Version: unkown"
msgstr ""

#: print/templates/color_swatch.html:8 print/templates/color_swatch.html:40
#: print/templates/operator_detailedview.html:9
msgid "Color"
msgstr ""

#: print/templates/color_swatch.html:11 print/templates/color_swatch.html:41
msgid "rgb"
msgstr ""

#: print/templates/color_swatch.html:15 print/templates/color_swatch.html:42
msgid "thread"
msgstr ""

#: print/templates/color_swatch.html:19 print/templates/color_swatch.html:43
#: print/templates/operator_detailedview.html:63
msgid "# stitches"
msgstr ""

#: print/templates/color_swatch.html:23 print/templates/color_swatch.html:44
msgid "# trims"
msgstr ""

#: print/templates/color_swatch.html:24 print/templates/color_swatch.html:45
#: print/templates/operator_detailedview.html:68
msgid "stop after?"
msgstr ""

#: print/templates/color_swatch.html:24 print/templates/color_swatch.html:45
#: print/templates/operator_detailedview.html:68
msgid "yes"
msgstr ""

#: print/templates/color_swatch.html:24 print/templates/color_swatch.html:45
#: print/templates/operator_detailedview.html:68
msgid "no"
msgstr ""

#: print/templates/color_swatch.html:40
#: print/templates/operator_detailedview.html:57
#: print/templates/print_detail.html:6
msgid "Enter thread name..."
msgstr ""

#: print/templates/custom-page.html:22 print/templates/ui.html:91
msgid "Enter URL"
msgstr ""

#: print/templates/custom-page.html:23 print/templates/custom-page.html:27
#: print/templates/custom-page.html:33 print/templates/ui.html:92
#: print/templates/ui.html:96 print/templates/ui.html:102
msgid "OK"
msgstr ""

#: print/templates/custom-page.html:26 print/templates/ui.html:95
msgid "Enter E-Mail"
msgstr ""

#: print/templates/custom-page.html:29 print/templates/custom-page.html:36
msgid "Custom Information Sheet"
msgstr ""

#: print/templates/custom-page.html:31 print/templates/ui.html:100
msgid "This will reset your custom text to the default."
msgstr ""

#: print/templates/custom-page.html:32 print/templates/ui.html:101
msgid "All changes will be lost."
msgstr ""

#: print/templates/footer.html:2
msgid "Page"
msgstr ""

#: print/templates/footer.html:3 print/templates/ui.html:98
#: print/templates/ui.html:105
msgid "Proudly generated with"
msgstr ""

#: print/templates/headline.html:5
msgid "Click to choose another logo"
msgstr ""

#: print/templates/headline.html:10
msgid "Enter job title..."
msgstr ""

#: print/templates/headline.html:11
msgid "CLIENT"
msgstr ""

#: print/templates/headline.html:11
msgid "Enter client name..."
msgstr ""

#: print/templates/headline.html:12
msgid "PURCHASE ORDER #:"
msgstr ""

#: print/templates/headline.html:12
msgid "Enter purchase order number..."
msgstr ""

#: print/templates/headline.html:15
#, python-format
msgid "%m/%d/%Y"
msgstr ""

#: print/templates/operator_detailedview.html:10
msgid "Thread Consumption"
msgstr ""

#: print/templates/operator_detailedview.html:11
msgid "Stops and Trims"
msgstr ""

#: print/templates/operator_detailedview.html:12
msgid "Notes"
msgstr ""

#: print/templates/operator_detailedview.html:24
#: print/templates/operator_overview.html:6
#: print/templates/print_overview.html:6
msgid "Unique Colors"
msgstr ""

#: print/templates/operator_detailedview.html:25
#: print/templates/operator_overview.html:7
#: print/templates/print_overview.html:7
msgid "Color Blocks"
msgstr ""

#: print/templates/operator_detailedview.html:28
#: print/templates/operator_overview.html:14
#: print/templates/print_overview.html:14
msgid "Design box size"
msgstr ""

#: print/templates/operator_detailedview.html:29
#: print/templates/operator_overview.html:16
#: print/templates/print_overview.html:16
msgid "Total thread used"
msgstr ""

#: print/templates/operator_detailedview.html:30
#: print/templates/operator_overview.html:15
#: print/templates/print_overview.html:15
msgid "Total stitch count"
msgstr ""

#: print/templates/operator_detailedview.html:31
#: print/templates/print_detail.html:11
msgid "Estimated time"
msgstr ""

#: print/templates/operator_detailedview.html:34
#: print/templates/operator_overview.html:8
#: print/templates/print_overview.html:8
msgid "Total stops"
msgstr ""

#: print/templates/operator_detailedview.html:35
#: print/templates/operator_overview.html:9
#: print/templates/print_overview.html:9
msgid "Total trims"
msgstr ""

#: print/templates/operator_detailedview.html:62
msgid "thread used"
msgstr ""

#: print/templates/operator_detailedview.html:64
msgid "estimated time"
msgstr ""

#: print/templates/operator_detailedview.html:67
#: electron/src/renderer/components/Simulator.vue:196
msgid "trims"
msgstr ""

#: print/templates/operator_detailedview.html:72
msgid "Enter operator notes..."
msgstr ""

#: print/templates/operator_overview.html:21
#: print/templates/print_overview.html:21
msgid "Job estimated time"
msgstr ""

#: print/templates/operator_overview.html:28
#: print/templates/print_detail.html:18 print/templates/print_overview.html:28
msgid "Ctrl + Scroll to Zoom"
msgstr ""

#: print/templates/print_detail.html:6
msgid "COLOR"
msgstr ""

#: print/templates/print_overview.html:42
msgid "Client Signature"
msgstr ""

#: print/templates/ui.html:2
msgid "Ink/Stitch Print Preview"
msgstr ""

#: print/templates/ui.html:4
msgid "Print"
msgstr ""

#: print/templates/ui.html:5
msgid "Save PDF"
msgstr ""

#: print/templates/ui.html:6 print/templates/ui.html:16
#: templates/embroider_settings.xml:3
msgid "Settings"
msgstr ""

#: print/templates/ui.html:7
msgid "Close"
msgstr ""

#: print/templates/ui.html:10
msgid "⚠ lost connection to Ink/Stitch"
msgstr ""

#: print/templates/ui.html:19 print/templates/ui.html:29
msgid "Page Setup"
msgstr ""

#: print/templates/ui.html:20
msgid "Branding"
msgstr ""

#: print/templates/ui.html:21 print/templates/ui.html:112
msgid "Estimated Time"
msgstr ""

#: print/templates/ui.html:22 print/templates/ui.html:146
msgid "Design"
msgstr ""

#: print/templates/ui.html:31
msgid "Printing Size"
msgstr ""

#: print/templates/ui.html:39
msgid "Print Layouts"
msgstr ""

#: print/templates/ui.html:42 print/templates/ui.html:136
msgid "Client Overview"
msgstr ""

#: print/templates/ui.html:46 print/templates/ui.html:137
msgid "Client Detailed View"
msgstr ""

#: print/templates/ui.html:50 print/templates/ui.html:138
msgid "Operator Overview"
msgstr ""

#: print/templates/ui.html:54 print/templates/ui.html:139
msgid "Operator Detailed View"
msgstr ""

#: print/templates/ui.html:56
msgid "Thumbnail size"
msgstr ""

#: print/templates/ui.html:62
msgid "Custom information sheet"
msgstr ""

#: print/templates/ui.html:65 print/templates/ui.html:108
msgid "Includes these Page Setup, estimated time settings and also the icon."
msgstr ""

#: print/templates/ui.html:65 print/templates/ui.html:108
#: print/templates/ui.html:142
msgid "Save as defaults"
msgstr ""

#: print/templates/ui.html:70
msgid "Logo"
msgstr ""

#: print/templates/ui.html:80
msgid "Footer: Operator contact information"
msgstr ""

#: print/templates/ui.html:114
msgid "Machine Settings"
msgstr ""

#: print/templates/ui.html:116
msgid "Average Machine Speed"
msgstr ""

#: print/templates/ui.html:117
msgid "stitches per minute "
msgstr ""

#: print/templates/ui.html:121
msgid "Time Factors"
msgstr ""

#: print/templates/ui.html:124
msgid "Includes average time for preparing the machine, thread breaks and/or bobbin changes, etc."
msgstr ""

#: print/templates/ui.html:124
msgid "seconds to add to total time*"
msgstr ""

#: print/templates/ui.html:128
msgid "This will be added to the total time."
msgstr ""

#: print/templates/ui.html:128
msgid "seconds needed for a color change*"
msgstr ""

#: print/templates/ui.html:131
msgid "seconds needed for trim"
msgstr ""

#: print/templates/ui.html:134
msgid "Display Time On"
msgstr ""

#: print/templates/ui.html:142
msgid "Includes page setup, estimated time and also the branding."
msgstr ""

#: print/templates/ui.html:147
msgid "Thread Palette"
msgstr ""

#: print/templates/ui.html:150
msgid "None"
msgstr ""

#: print/templates/ui.html:166
msgid "Changing the thread palette will cause thread names and catalog numbers to be recalculated based on the new palette.  Any changes you have made to color or thread names will be lost.  Are you sure?"
msgstr ""

#: print/templates/ui.html:169
msgid "Yes"
msgstr ""

#: print/templates/ui.html:170
msgid "No"
msgstr ""

#: print/templates/ui_svg_action_buttons.html:1
msgid "Scale"
msgstr ""

#: print/templates/ui_svg_action_buttons.html:3
msgid "Fit"
msgstr ""

#: print/templates/ui_svg_action_buttons.html:5
msgid "Apply to all"
msgstr ""

#: print/templates/ui_svg_action_buttons.html:9
#: print/templates/ui_svg_action_buttons.html:12
msgid "Realistic"
msgstr ""

#. description for pyembroidery file format: pec
#. description for pyembroidery file format: pes
#. description for pyembroidery file format: phb
#. description for pyembroidery file format: phc
#: pyembroidery-format-descriptions.py:2 pyembroidery-format-descriptions.py:4
#: pyembroidery-format-descriptions.py:56
#: pyembroidery-format-descriptions.py:58
msgid "Brother Embroidery Format"
msgstr ""

#. description for pyembroidery file format: exp
#: pyembroidery-format-descriptions.py:6
msgid "Melco Embroidery Format"
msgstr ""

#. description for pyembroidery file format: dst
#. description for pyembroidery file format: tbf
#: pyembroidery-format-descriptions.py:8 pyembroidery-format-descriptions.py:48
msgid "Tajima Embroidery Format"
msgstr ""

#. description for pyembroidery file format: jef
#. description for pyembroidery file format: sew
#. description for pyembroidery file format: jpx
#: pyembroidery-format-descriptions.py:10
#: pyembroidery-format-descriptions.py:20
#: pyembroidery-format-descriptions.py:74
msgid "Janome Embroidery Format"
msgstr ""

#. description for pyembroidery file format: vp3
#. description for pyembroidery file format: ksm
#. description for pyembroidery file format: max
#. description for pyembroidery file format: pcd
#. description for pyembroidery file format: pcq
#. description for pyembroidery file format: pcm
#. description for pyembroidery file format: pcs
#: pyembroidery-format-descriptions.py:12
#: pyembroidery-format-descriptions.py:50
#: pyembroidery-format-descriptions.py:62
#: pyembroidery-format-descriptions.py:66
#: pyembroidery-format-descriptions.py:68
#: pyembroidery-format-descriptions.py:70
#: pyembroidery-format-descriptions.py:72
msgid "Pfaff Embroidery Format"
msgstr ""

#. description for pyembroidery file format: svg
#: pyembroidery-format-descriptions.py:14
msgid "Scalable Vector Graphics"
msgstr ""

#. description for pyembroidery file format: csv
#: pyembroidery-format-descriptions.py:16
msgid "Comma-separated values"
msgstr ""

#. description for pyembroidery file format: xxx
#: pyembroidery-format-descriptions.py:18
msgid "Singer Embroidery Format"
msgstr ""

#. description for pyembroidery file format: u01
#: pyembroidery-format-descriptions.py:22
msgid "Barudan Embroidery Format"
msgstr ""

#. description for pyembroidery file format: shv
#: pyembroidery-format-descriptions.py:24
msgid "Husqvarna Viking Embroidery Format"
msgstr ""

#. description for pyembroidery file format: 10o
#. description for pyembroidery file format: 100
#: pyembroidery-format-descriptions.py:26
#: pyembroidery-format-descriptions.py:28
msgid "Toyota Embroidery Format"
msgstr ""

#. description for pyembroidery file format: bro
#: pyembroidery-format-descriptions.py:30
msgid "Bits & Volts Embroidery Format"
msgstr ""

#. description for pyembroidery file format: dat
#: pyembroidery-format-descriptions.py:32
msgid "Sunstar or Barudan Embroidery Format"
msgstr ""

#. description for pyembroidery file format: dsb
#: pyembroidery-format-descriptions.py:34
msgid "Tajima(Barudan) Embroidery Format"
msgstr ""

#. description for pyembroidery file format: dsz
#: pyembroidery-format-descriptions.py:36
msgid "ZSK USA Embroidery Format"
msgstr ""

#. description for pyembroidery file format: emd
#: pyembroidery-format-descriptions.py:38
msgid "Elna Embroidery Format"
msgstr ""

#. description for pyembroidery file format: exy
#: pyembroidery-format-descriptions.py:40
msgid "Eltac Embroidery Format"
msgstr ""

#. description for pyembroidery file format: fxy
#: pyembroidery-format-descriptions.py:42
msgid "Fortron Embroidery Format"
msgstr ""

#. description for pyembroidery file format: gt
#: pyembroidery-format-descriptions.py:44
msgid "Gold Thread Embroidery Format"
msgstr ""

#. description for pyembroidery file format: inb
#: pyembroidery-format-descriptions.py:46
msgid "Inbro Embroidery Format"
msgstr ""

#. description for pyembroidery file format: tap
#: pyembroidery-format-descriptions.py:52
msgid "Happy Embroidery Format"
msgstr ""

#. description for pyembroidery file format: stx
#: pyembroidery-format-descriptions.py:54
msgid "Data Stitch Embroidery Format"
msgstr ""

#. description for pyembroidery file format: new
#: pyembroidery-format-descriptions.py:60
msgid "Ameco Embroidery Format"
msgstr ""

#. description for pyembroidery file format: mit
#: pyembroidery-format-descriptions.py:64
msgid "Mitsubishi Embroidery Format"
msgstr ""

#. description for pyembroidery file format: stc
#: pyembroidery-format-descriptions.py:76
msgid "Gunold Embroidery Format"
msgstr ""

#. description for pyembroidery file format: zxy
#: pyembroidery-format-descriptions.py:78
msgid "ZSK TC Embroidery Format"
msgstr ""

#. description for pyembroidery file format: pmv
#: pyembroidery-format-descriptions.py:80
msgid "Brother Stitch Format"
msgstr ""

#. description for pyembroidery file format: txt
#: pyembroidery-format-descriptions.py:82
msgid "G-code Format"
msgstr ""

#: templates/about.xml:3 templates/about.xml:6
msgid "About"
msgstr ""

#: templates/about.xml:10
msgid "An open-source machine embroidery design platform based on Inkscape."
msgstr ""

#: templates/about.xml:15
msgid "License"
msgstr ""

#: templates/auto_satin.xml:3
msgid "Auto-Route Satin Columns"
msgstr ""

#: templates/auto_satin.xml:5
msgid "Trim jump stitches"
msgstr ""

#: templates/auto_satin.xml:6
msgid "Preserve order of satin columns"
msgstr ""

#: templates/auto_satin.xml:12 templates/convert_to_satin.xml:10
#: templates/cut_satin.xml:10 templates/flip.xml:10
msgid "Satin Tools"
msgstr ""

#: templates/break_apart.xml:3
msgid "Break Apart Fill Objects"
msgstr ""

#: templates/break_apart.xml:10
msgid "Fill Tools"
msgstr ""

#: templates/break_apart.xml:15
msgid "This extension will try to repair fill shapes and break them apart if necessary. Holes will be retained. Use on simple or overlapping shapes."
msgstr ""

#: templates/cleanup.xml:3
msgid "Cleanup Document"
msgstr ""

#: templates/cleanup.xml:5
msgid "Use this extension to remove small objects from the document."
msgstr ""

#: templates/cleanup.xml:6
msgid "Remove Small Fill Areas"
msgstr ""

#: templates/cleanup.xml:7
msgid "Removes areas smaller than dedined by threshold."
msgstr ""

#: templates/cleanup.xml:8
msgid "Fill area threshold"
msgstr ""

#: templates/cleanup.xml:10
msgid "Removes small strokes shorter than defined by threshold."
msgstr ""

#: templates/cleanup.xml:11
msgid "Stroke threshold"
msgstr ""

#: templates/convert_to_satin.xml:3
msgid "Convert Line to Satin"
msgstr ""

#: templates/cut_satin.xml:3
msgid "Cut Satin Column"
msgstr ""

#: templates/embroider.xml:3
msgid "Embroider"
msgstr ""

#: templates/embroider.xml:5
msgid "Create a stitch file"
msgstr ""

#: templates/embroider.xml:6
msgid "Save your embroidery file through | File > Save a Copy ... |"
msgstr ""

#: templates/embroider.xml:7
msgid "Choose from listed embroidery file formats and save."
msgstr ""

#: templates/embroider.xml:9
msgid "Multiple file formats can be saved by choosing the zip file format."
msgstr ""

#: templates/embroider.xml:14 templates/print.xml:10 templates/simulator.xml:10
#: templates/stitch_plan_preview.xml:10
msgid "Visualise and Export"
msgstr ""

#: templates/embroider_settings.xml:13
msgid "Output Settings"
msgstr ""

#: templates/embroider_settings.xml:16
msgid "Collapse length (mm)"
msgstr ""

#: templates/embroider_settings.xml:17
msgid "Jump stitches smaller than this will be treated as normal stitches."
msgstr ""

#: templates/flip.xml:3
msgid "Flip Satin Column Rails"
msgstr ""

#: templates/global_commands.xml:3
msgid "Add Commands"
msgstr ""

#: templates/global_commands.xml:5
msgid "These commands affect the entire embroidery design."
msgstr ""

#. Inkscape submenu under Extensions -> Ink/Stitch
#: templates/global_commands.xml:15 templates/layer_commands.xml:14
#: templates/object_commands.xml:13
msgid "Commands"
msgstr ""

#: templates/import_threadlist.xml:3
msgid "Import Threadlist"
msgstr ""

#: templates/import_threadlist.xml:6
msgid "Choose file"
msgstr ""

#: templates/input.xml:9
#, python-format
msgid "convert %(file_extension)s file to Ink/Stitch manual-stitch paths"
msgstr ""

#: templates/install.xml:3
msgid "Install thread color palettes for Inkscape"
msgstr ""

#: templates/layer_commands.xml:3
msgid "Add Layer Commands"
msgstr ""

#: templates/layer_commands.xml:5
msgid "Commands will be added to the currently-selected layer."
msgstr ""

#: templates/lettering.xml:3
msgid "Lettering"
msgstr ""

#: templates/lettering_custom_font_dir.xml:3
#: templates/lettering_custom_font_dir.xml:18
msgid "Custom font directory"
msgstr ""

#: templates/lettering_custom_font_dir.xml:10
#: templates/lettering_generate_json.xml:10
#: templates/lettering_remove_kerning.xml:10
msgid "Font Tools"
msgstr ""

#: templates/lettering_custom_font_dir.xml:15
msgid "Set a custom directory for additional fonts to be used with the lettering tool."
msgstr ""

#: templates/lettering_custom_font_dir.xml:21
msgid "Usage: Create a subdirectory for each font you add."
msgstr ""

#: templates/lettering_generate_json.xml:3
msgid "Generate JSON"
msgstr ""

#: templates/lettering_generate_json.xml:15
msgid "Generates font.json which can be used by the lettering tool."
msgstr ""

#: templates/lettering_generate_json.xml:19
msgid "Name"
msgstr ""

#: templates/lettering_generate_json.xml:24
msgid "Insert a font SVG file with kerning information."
msgstr ""

#: templates/lettering_generate_json.xml:26
msgid "Font File"
msgstr ""

#: templates/lettering_generate_json.xml:29
msgid "Autoroute Satin"
msgstr ""

#: templates/lettering_generate_json.xml:30
msgid "Disable if you defined manual routing in your font."
msgstr ""

#: templates/lettering_generate_json.xml:31
msgid "Reversible"
msgstr ""

#: templates/lettering_generate_json.xml:32
msgid "If disabled back and forth stitching will not be possile for this font."
msgstr ""

#: templates/lettering_generate_json.xml:34
msgid "Default Glyph"
msgstr ""

#: templates/lettering_generate_json.xml:37
msgid "Min Scale"
msgstr ""

#: templates/lettering_generate_json.xml:38
msgid "Max Scale"
msgstr ""

#: templates/lettering_generate_json.xml:40
msgid "Leading (px)"
msgstr ""

#: templates/lettering_generate_json.xml:40
msgid "If 0, the value will be calculated or defaults to 100"
msgstr ""

#: templates/lettering_remove_kerning.xml:3
msgid "Remove Kerning"
msgstr ""

#: templates/lettering_remove_kerning.xml:15
msgid "Removes Kerning information from given SVG files"
msgstr ""

#: templates/lettering_remove_kerning.xml:19
msgid "Make sure you keep a copy of the original file. After running this extension kerning information will be lost unrevertably from these files."
msgstr ""

#: templates/lettering_remove_kerning.xml:23
msgid "Select Font Files"
msgstr ""

#: templates/object_commands.xml:3
msgid "Attach Commands to Selected Objects"
msgstr ""

#: templates/output.xml:9
#, python-format
msgid "Save design in %(file_extension)s format using Ink/Stitch"
msgstr ""

#: templates/output_params_txt.xml:4
msgid "negate X coordinate values"
msgstr ""

#: templates/output_params_txt.xml:4
msgid "Negate x coordinates"
msgstr ""

#: templates/output_params_txt.xml:5
msgid "negate Y coordinate values"
msgstr ""

#: templates/output_params_txt.xml:5
msgid "Negate y coordinates"
msgstr ""

#: templates/output_params_txt.xml:6
msgid "Z coordinate value"
msgstr ""

#: templates/output_params_txt.xml:6
msgid "Either alternate Z value between 0 and 1 or travel custom value."
msgstr ""

#: templates/output_params_txt.xml:7
msgid "alternate Z value"
msgstr ""

#: templates/output_params_txt.xml:8 templates/output_params_txt.xml:10
msgid "Z travel per stitch"
msgstr ""

#: templates/output_params_txt.xml:11
msgid "increment z coordinate by this amount per stitch if \"Z travel per stitch\" is enabled"
msgstr ""

#: templates/output_params_txt.xml:15
#, python-format
msgid "Use '%X' for x-coordinate. Use '%Y' for y-coordinate and '%Z' for z-coordinate. Use '\\n' for a new line."
msgstr ""

#: templates/output_params_txt.xml:17 templates/output_params_txt.xml:19
msgid "Use '\\n' for a new line. Leave empty to use default value. Use 'none' to remove."
msgstr ""

#: templates/output_params_txt.xml:20
msgid "START"
msgstr ""

#: templates/output_params_txt.xml:21 templates/output_params_txt.xml:23
msgid "Use '\\n' for a new line."
msgstr ""

#: templates/output_params_txt.xml:22
msgid "END"
msgstr ""

#: templates/output_params_txt.xml:26
msgid "laser mode"
msgstr ""

#: templates/output_params_txt.xml:27
msgid "Laser mode (generate g-code for grbl laser mode)"
msgstr ""

#: templates/output_params_txt.xml:28
msgid "dynamic laser power"
msgstr ""

#: templates/output_params_txt.xml:29
msgid "Use Grbl's M4 dynamic laser power mode.  Ensures consistent laser cutting power regardless of motor speed.  Only for PWM-capable lasers."
msgstr ""

#: templates/output_params_txt.xml:31
msgid "laser warm-up time"
msgstr ""

#: templates/output_params_txt.xml:32
msgid "When turning on the laser, wait this many seconds for laser to warm up (G4 command)"
msgstr ""

#: templates/output_params_txt.xml:33
msgid "spindle speed"
msgstr ""

#: templates/output_params_txt.xml:34
msgid "spindle speed (laser power for laser mode, set to -1 to omit)"
msgstr ""

#: templates/output_params_txt.xml:35
msgid "min spindle speed"
msgstr ""

#: templates/output_params_txt.xml:36
msgid "minimum spindle speed value (grbl $31 setting)"
msgstr ""

#: templates/output_params_txt.xml:37
msgid "max spindle speed"
msgstr ""

#: templates/output_params_txt.xml:38
msgid "minimum spindle speed value (grbl $30 setting)"
msgstr ""

#: templates/output_params_txt.xml:39
msgid "feed rate (in mm/min, set to -1 to omit)"
msgstr ""

#: templates/params.xml:3
msgid "Params"
msgstr ""

#: templates/print.xml:3
msgid "PDF Export"
msgstr ""

#: templates/remove_embroidery_settings.xml:3
msgid "Remove embroidery settings"
msgstr ""

#: templates/remove_embroidery_settings.xml:5
msgid "Use this extension to remove the information Ink/Stitch has stored in your document.  This can be especially useful if you copy and paste objects from an embroidery design into another document."
msgstr ""

#: templates/remove_embroidery_settings.xml:6
msgid "Remove Params"
msgstr ""

#: templates/remove_embroidery_settings.xml:7
msgid "Removes params from selected objects or all objects if nothing is selected."
msgstr ""

#: templates/remove_embroidery_settings.xml:8
msgid "Remove Commands"
msgstr ""

#: templates/remove_embroidery_settings.xml:9
msgid "Removes visual commands from selected objects or all objects if nothing is selected."
msgstr ""

#: templates/remove_embroidery_settings.xml:10
msgid "Remove Print Settings from SVG metadata"
msgstr ""

#: templates/reorder.xml:3
msgid "Reorder"
msgstr ""

#: templates/simulator.xml:3
msgid "Simulator / Realistic Preview"
msgstr ""

#: templates/stitch_plan_preview.xml:3
msgid "Stitch Plan Preview"
msgstr ""

#: templates/troubleshoot.xml:3
msgid "Troubleshoot Objects"
msgstr ""

#: templates/zip.xml:8
msgid "Ink/Stitch: ZIP export multiple formats (.zip)"
msgstr ""

#: templates/zip.xml:9
msgid "Create a ZIP with multiple embroidery file formats using Ink/Stitch"
msgstr ""

#: templates/zip.xml:17
msgid "Scalable Vector Graphic"
msgstr ""

#: templates/zip.xml:18
msgid "Threadlist"
msgstr ""

#. name for left arrow keyboard key
#: electron/src/renderer/components/Simulator.vue:52
msgid "← Arrow left"
msgstr ""

#. name for right arrow keyboard key
#: electron/src/renderer/components/Simulator.vue:63
msgid "→ Arrow right"
msgstr ""

#. name for up arrow keyboard key
#: electron/src/renderer/components/Simulator.vue:129
msgid "↑ Arrow up"
msgstr ""

#. name for down arrow keyboard key
#: electron/src/renderer/components/Simulator.vue:118
msgid "↓ Arrow down"
msgstr ""

#. name for this keyboard key: +
#: electron/src/renderer/components/Simulator.vue:89
msgid "+ Plus"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:15
msgid "Button"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:203
msgid "color changes"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:186
msgid "Command"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:145
msgid "Controls"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:223
msgid "cursor"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:18
msgid "Function"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:9
msgid "Ink/Stitch can install palettes for Inkscape matching the thread colors from popular machine embroidery thread manufacturers."
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:48
msgid "Inkscape add-on installation failed"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:31
msgid "Inkscape palettes have been installed. Please restart Inkscape to load the new palettes."
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:17
msgid "Install"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:4
msgid "Install Palettes"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:26
msgid "Installation Completed"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:43
msgid "Installation Failed"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:106
msgid "Jump to next command"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:97
msgid "Jump to previous command"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:199
msgid "jumps"
msgstr ""

#. name for this keyboard key: -
#: electron/src/renderer/components/Simulator.vue:76
msgid "Minus"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:215
msgid "needle points"
msgstr ""

#. description of keyboard shortcut that moves one stitch backward in simulator
#: electron/src/renderer/components/Simulator.vue:71
msgid "One step backward"
msgstr ""

#. description of keyboard shortcut that moves one stitch forward in simulator
#: electron/src/renderer/components/Simulator.vue:84
msgid "One step forward"
msgstr ""

#. name for page down keyboard key
#: electron/src/renderer/components/Simulator.vue:99
msgid "Page down (PgDn)"
msgstr ""

#. name for page up keyboard key
#: electron/src/renderer/components/Simulator.vue:108
msgid "Page up (PgUp)"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:40
msgid "Play"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:49
msgid "Play backward"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:60
msgid "Play forward"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:220
msgid "realistic"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:260
msgid "Rendering stitch-plan..."
msgstr ""

#: electron/src/renderer/components/Simulator.vue:21
msgid "Shortcut Key"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:192
msgid "Show"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:10
msgid "Simulator Shortcut Keys"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:115
msgid "Slow down"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:32
msgid "Space"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:126
msgid "Speed up"
msgstr ""

#: electron/src/renderer/components/Simulator.vue:174
msgid "Speed: %{speed} stitch/sec"
msgid_plural "Speed: %{speed} stitches/sec"
msgstr[0] ""
msgstr[1] ""

#: electron/src/renderer/components/Simulator.vue:206
msgid "stops"
msgstr ""

#: electron/src/renderer/components/InstallPalettes.vue:55
msgid "Try again"
msgstr ""