Merge 8eca77d828 into 6a7071eb96

* amitaclo small

set small  tolerance for underlay of small version of amitaclo

* amitaclo small

* auberge small

* baumans

add a small version

* espresso small

* Pacificlo

* glacial

* tolerance setting

to digory doodles and small font

* excalibur

* magnolia KOR

* Emilio 20 Simple Small

* add new previews

* glacial

set minnimum size to 50%

* check all params are set

abecedaire
AGS garamond
apex lake
apex simple
aventurina
brockscript
cherryfor inkstitch

* check parameters are all there

and also check baseline is at the right place....
chopin
coronaviral
deja vu
digoory doodle
emilio 20
emilio 20 applique
emilio bold
emilio tricolore
infinipicto
foldinkstitch

* make sure all params are consistent and present

kausham script

* checking all parameters are present andc onsistent

learning curve
lobster
manuskrit gotisch
marcellus  FI
monicha
namskout
roman AGS
milli marif
roman AGS bicolore
sacramarif

* check parameters consistency

sortefax medium
sortefax XXL
TT Directors
TT Masters
Abril

* amitaclo

simplify paths

.github/workflows/build.yml

@@ -108,6 +108,10 @@ jobs:
           python-version: '3.8.x'
           architecture: 'x86'
       - uses: microsoft/setup-msbuild@v2
+      - name: Setup Git for Windows SDK
+        uses: git-for-windows/setup-git-for-windows-sdk@v1.10.0
+        with:
+          flavor: build-installers
       - name: install dependencies
         shell: bash
         run: |
@@ -170,6 +174,10 @@ jobs:
           python-version: '3.8.x'
           architecture: 'x64'
       - uses: microsoft/setup-msbuild@v2
+      - name: Setup Git for Windows SDK
+        uses: git-for-windows/setup-git-for-windows-sdk@v1.10.0
+        with:
+          flavor: build-installers
       - name: install dependencies
         shell: bash
         run: |

fonts/amitaclo_small/font.json

@@ -1,6 +1,6 @@
 {
     "name": "Amitaclo small",
-    "description": "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font).",
+    "description": "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font).",
     "keywords": [
         "handwriting",
         "tiny"
@@ -9,7 +9,7 @@
     "auto_satin": false,
     "reversible": false,
     "default_glyph": " ",
-    "min_scale": 0.3,
+    "min_scale": 0.20,
     "max_scale": 0.55,
     "size": 25.3,
     "horiz_adv_x_default": 0,

fonts/apex_lake/→.svg

@@ -28,9 +28,9 @@
      inkscape:window-height="1017"
      id="namedview151"
      showgrid="true"
-     inkscape:zoom="3.0127685"
-     inkscape:cx="112.18917"
-     inkscape:cy="218.73569"
+     inkscape:zoom="1.2033421"
+     inkscape:cx="111.77204"
+     inkscape:cy="218.55796"
      inkscape:window-x="-8"
      inkscape:window-y="-8"
      inkscape:window-maximized="1"
@@ -43,7 +43,7 @@
      inkscape:pagecheckerboard="0"
      inkscape:deskcolor="#d1d1d1">
     <sodipodi:guide
-       position="0,0"
+       position="-18.282415,-47.277888"
        orientation="0,1"
        inkscape:label="baseline"
        id="guide1067"
@@ -63,7 +63,7 @@
        inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
-       position="0,0"
+       position="-32.409736,-27.333435"
        orientation="0,1"
        inkscape:label="16"
        id="guide1073"

fonts/auberge_small/font.json

@@ -1,6 +1,6 @@
 {
     "name": "Auberge small",
-    "description": "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). ",
+    "description": "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). ",
     "keywords": [
         "handwriting",
         "tiny"
@@ -10,7 +10,7 @@
     "reversible": false,
     "letter_case": "",
     "default_glyph": " ",
-    "min_scale": 0.25,
+    "min_scale": 0.2,
     "max_scale": 0.55,
     "size": 35,
     "horiz_adv_x_default": 62,

fonts/baumans_FI_Small/LICENSE

@@ -0,0 +1,94 @@
+This font has been adapted for Ink/Stitch by Célia Imbert Sabater, Claudette Venneugues-Aminot, Corinne Renaud, Françoise Lapierre Baillet, Laure Doisneau, Marie Françoise Bris
+
+ORIGINAL FONT DOWNLOAD: https://fonts.google.com/specimen/Baumans#standard-styles
+LICENSE: licensed under the Open Font License. 
+==========================
+Baumans 
+==========================
+
+Baumans is a font designed by Cyreal
+
+Open Font License
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE. 

fonts/baumans_FI_Small/font.json

@@ -0,0 +1,330 @@
+{
+    "name": "Baumans FI small",
+    "description": "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). ",
+    "keywords": [
+        "tiny"
+    ],
+    "leading": 162,
+    "auto_satin": false,
+    "reversible": true,
+    "default_glyph": " ",
+    "min_scale": 0.15,
+    "max_scale": 0.3,
+    "size": 22.3,
+    "horiz_adv_x_default": 93,
+    "horiz_adv_x_space": 37,
+    "units_per_em": 162,
+    "horiz_adv_x": {
+        " ": 37,
+        "!": 44,
+        "\"": 48,
+        "#": 97,
+        "$": 82,
+        "%": 145,
+        "&": 95,
+        "'": 25,
+        "(": 62,
+        ")": 62,
+        "*": 75,
+        ",": 34,
+        "-": 46,
+        ".": 27,
+        "/": 57,
+        "0": 95,
+        "1": 51,
+        "2": 86,
+        "3": 86,
+        "4": 91,
+        "5": 86,
+        "6": 92,
+        "7": 72,
+        "8": 90,
+        "9": 92,
+        ":": 27,
+        ";": 41,
+        "<": 74,
+        ">": 74,
+        "?": 85,
+        "@": 127,
+        "A": 98,
+        "B": 96,
+        "C": 85,
+        "D": 98,
+        "E": 82,
+        "F": 66,
+        "G": 99,
+        "H": 102,
+        "I": 37,
+        "J": 62,
+        "K": 88,
+        "L": 78,
+        "M": 128,
+        "N": 101,
+        "O": 126,
+        "P": 91,
+        "Q": 126,
+        "R": 92,
+        "S": 81,
+        "T": 79,
+        "U": 100,
+        "V": 97,
+        "W": 133,
+        "X": 91,
+        "Y": 87,
+        "Z": 84,
+        "[": 47,
+        "\\": 57,
+        "]": 47,
+        "_": 91,
+        "`": 40,
+        "a": 81,
+        "b": 96,
+        "c": 76,
+        "d": 94,
+        "e": 81,
+        "f": 51,
+        "g": 95,
+        "h": 83,
+        "i": 42,
+        "j": 38,
+        "k": 77,
+        "l": 43,
+        "m": 121,
+        "n": 84,
+        "p": 96,
+        "q": 94,
+        "r": 56,
+        "s": 73,
+        "t": 58,
+        "u": 84,
+        "v": 75,
+        "w": 110,
+        "x": 75,
+        "y": 80,
+        "z": 69,
+        "{": 61,
+        "|": 35,
+        "}": 65,
+        "~": 99,
+        " ": 37,
+        "¡": 44,
+        "¢": 76,
+        "£": 88,
+        "¤": 96,
+        "¥": 87,
+        "¦": 35,
+        "§": 79,
+        "¨": 58,
+        "©": 132,
+        "ª": 57,
+        "«": 77,
+        "­": 46,
+        "®": 132,
+        "¯": 46,
+        "°": 54,
+        "²": 47,
+        "³": 45,
+        "´": 40,
+        "µ": 80,
+        "¶": 96,
+        "·": 31,
+        "¸": 35,
+        "¹": 39,
+        "º": 68,
+        "»": 77,
+        "¼": 108,
+        "½": 109,
+        "¾": 109,
+        "¿": 85,
+        "À": 98,
+        "Á": 98,
+        "Â": 98,
+        "Ã": 98,
+        "Ä": 98,
+        "Å": 98,
+        "Æ": 143,
+        "Ç": 88,
+        "È": 82,
+        "É": 82,
+        "Ê": 82,
+        "Ë": 82,
+        "Ì": 37,
+        "Í": 37,
+        "Î": 37,
+        "Ï": 37,
+        "Ð": 98,
+        "Ñ": 100,
+        "Ò": 126,
+        "Ó": 126,
+        "Ô": 126,
+        "Õ": 126,
+        "Ö": 126,
+        "Ø": 134,
+        "Ù": 100,
+        "Ú": 100,
+        "Û": 100,
+        "Ü": 100,
+        "Ý": 87,
+        "Þ": 88,
+        "ß": 82,
+        "à": 81,
+        "á": 81,
+        "â": 81,
+        "ã": 81,
+        "ä": 81,
+        "å": 81,
+        "æ": 131,
+        "ç": 76,
+        "è": 81,
+        "é": 81,
+        "ê": 81,
+        "ë": 81,
+        "ì": 42,
+        "í": 42,
+        "î": 42,
+        "ï": 42,
+        "ð": 94,
+        "ñ": 84,
+        "ø": 91,
+        "ù": 84,
+        "ú": 84,
+        "û": 84,
+        "ü": 84,
+        "ý": 80,
+        "ÿ": 80,
+        "ı": 42,
+        "Œ": 177,
+        "œ": 144,
+        "ˆ": 61,
+        "ˇ": 61,
+        "˚": 43,
+        "˜": 69,
+        "–": 91,
+        "—": 115,
+        "‘": 45,
+        "’": 45,
+        "‚": 34,
+        "“": 79,
+        "”": 79,
+        "„": 69,
+        "•": 66,
+        "‹": 47,
+        "›": 47,
+        "⁄": 52,
+        "⁴": 49,
+        "€": 86,
+        "₴": 85,
+        "₶": 91
+    },
+    "kerning_pairs": {},
+    "glyphs": [
+        "&",
+        "'",
+        "‘",
+        "(",
+        ")",
+        "+",
+        ",",
+        "-",
+        ".",
+        "0",
+        "1",
+        "2",
+        "3",
+        "4",
+        "5",
+        "6",
+        "7",
+        "8",
+        "9",
+        ":",
+        ";",
+        "=",
+        "?",
+        "!",
+        "@",
+        "A",
+        "B",
+        "C",
+        "D",
+        "E",
+        "È",
+        "É",
+        "Ê",
+        "Ë",
+        "F",
+        "G",
+        "H",
+        "I",
+        "J",
+        "K",
+        "L",
+        "M",
+        "N",
+        "O",
+        "P",
+        "Q",
+        "R",
+        "S",
+        "T",
+        "U",
+        "V",
+        "W",
+        "X",
+        "Y",
+        "Z",
+        "`",
+        "a",
+        "b",
+        "c",
+        "d",
+        "e",
+        "f",
+        "g",
+        "h",
+        "i",
+        "j",
+        "k",
+        "l",
+        "m",
+        "n",
+        "o",
+        "p",
+        "q",
+        "r",
+        "s",
+        "t",
+        "u",
+        "v",
+        "w",
+        "x",
+        "y",
+        "z",
+        "¨",
+        "«",
+        "´",
+        "’",
+        "»",
+        "Ä",
+        "Ö",
+        "Ü",
+        "ß",
+        "à",
+        "á",
+        "â",
+        "ä",
+        "ç",
+        "è",
+        "é",
+        "ê",
+        "ë",
+        "î",
+        "ï",
+        "ô",
+        "ö",
+        "ù",
+        "û",
+        "ü",
+        "ˆ"
+    ]
+}

fonts/chopin/→.svg

@@ -29,13 +29,13 @@
      inkscape:window-height="800"
      id="namedview245"
      showgrid="true"
-     inkscape:zoom="1.870871"
-     inkscape:cx="42.760831"
-     inkscape:cy="146.99036"
+     inkscape:zoom="0.52838709"
+     inkscape:cx="76.648353"
+     inkscape:cy="147.61905"
      inkscape:window-x="0"
      inkscape:window-y="25"
      inkscape:window-maximized="0"
-     inkscape:current-layer="g381"
+     inkscape:current-layer="g94"
      inkscape:document-rotation="0"
      scale-x="1"
      inkscape:snap-global="false"
@@ -187,7 +187,7 @@ claudeserieux@gmail.com  Based on Polonaise from Phil Martin (1923-2005)
      id="g381"
      inkscape:label="GlyphLayer-!"
      inkscape:groupmode="layer"
-     style="display:inline">
+     style="display:none">
     <path
        inkscape:label="Auto-remplissage satin 2"
        inkstitch:center_walk_underlay="False"
@@ -17925,7 +17925,7 @@ claudeserieux@gmail.com  Based on Polonaise from Phil Martin (1923-2005)
   </g>
   <g
      id="g94"
-     style="display:none"
+     style="display:inline"
      inkscape:label="GlyphLayer-ß"
      inkscape:groupmode="layer">
     <path
@@ -17948,7 +17948,8 @@ claudeserieux@gmail.com  Based on Polonaise from Phil Martin (1923-2005)
        inkstitch:min_stitch_length_mm=".5"
        inkstitch:min_jump_stitch_length_mm="3"
        inkstitch:zigzag_underlay_max_stitch_length_mm="5"
-       inkstitch:zigzag_underlay_inset_mm="0" />
+       inkstitch:zigzag_underlay_inset_mm="0"
+       inkstitch:reverse_rails="none" />
     <path
        d="M 32.952001,75.496057 C 17.708983,123.54356 1.4001953,171.2577 -11.564598,219.99227 c -6.012381,17.25679 -9.803701,37.32901 -24.258836,49.69947 -13.955291,10.09434 -36.241906,-0.80323 -29.568804,-19.17801 0.26498,-14.69082 27.800365,-10.76719 17.490787,1.3104 -3.059871,0.71206 -6.123345,-0.15319 -9.024465,-1.02124"
        style="fill:none;stroke:#000000;stroke-width:1;stroke-dasharray:1, 1;stroke-dashoffset:0"
@@ -17970,7 +17971,8 @@ claudeserieux@gmail.com  Based on Polonaise from Phil Martin (1923-2005)
        inkstitch:min_stitch_length_mm=".5"
        inkstitch:min_jump_stitch_length_mm="3"
        inkstitch:zigzag_underlay_max_stitch_length_mm="5"
-       inkstitch:zigzag_underlay_inset_mm="0" />
+       inkstitch:zigzag_underlay_inset_mm="0"
+       inkstitch:reverse_rails="none" />
     <path
        d="m 44.9112,78.8717 c -1.014467,0.8181 -2.028933,1.6362 -3.0434,2.4543"
        style="fill:none;stroke:#000000;stroke-width:1;stroke-dasharray:1, 1;stroke-dashoffset:0"

fonts/emilio_20/font.json

@@ -3,7 +3,8 @@
     "description": "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay",
     "keywords": [
         "display",
-        "monogram"
+        "monogram",
+        "serif"
     ],
     "leading": 200,
     "auto_satin": false,

fonts/emilio_20/→.svg

@@ -16,7 +16,7 @@
    xmlns:dc="http://purl.org/dc/elements/1.1/"
    xmlns:inkstitch="http://inkstitch.org/namespace">
   <sodipodi:namedview
-     showguides="false"
+     showguides="true"
      pagecolor="#ffffff"
      bordercolor="#666666"
      borderopacity="1"
@@ -29,9 +29,9 @@
      inkscape:window-height="2097"
      id="namedview85"
      showgrid="true"
-     inkscape:zoom="2.23932"
-     inkscape:cx="147.81273"
-     inkscape:cy="106.72883"
+     inkscape:zoom="1.7888318"
+     inkscape:cx="41.647292"
+     inkscape:cy="175.53355"
      inkscape:window-x="-8"
      inkscape:window-y="-8"
      inkscape:window-maximized="1"
@@ -93,7 +93,6 @@ Created by FontForge 20190801 at Sat Mar 27 14:01:19 2021
     <dc:format>image/svg+xml</dc:format>
     <dc:type
        rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-    <dc:title />
   </cc:Work>
 </rdf:RDF>
 <inkstitch:collapse_len_mm

fonts/emilio_20_applique/font.json

@@ -3,7 +3,8 @@
     "description": "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique",
     "keywords": [
         "display",
-        "applique"
+        "applique",
+        "serif"
     ],
     "leading": 200,
     "auto_satin": false,

fonts/emilio_20_applique/→.svg

@@ -21,9 +21,9 @@
      inkscape:pageopacity="0.0"
      inkscape:pagecheckerboard="0"
      showgrid="true"
-     inkscape:zoom="1.731137"
-     inkscape:cx="124.77348"
-     inkscape:cy="133.43831"
+     inkscape:zoom="1.5622593"
+     inkscape:cx="63.049711"
+     inkscape:cy="154.90386"
      inkscape:window-width="1920"
      inkscape:window-height="991"
      inkscape:window-x="-9"
@@ -41,69 +41,62 @@
      inkscape:snap-intersection-paths="false"
      inkscape:showpageshadow="2"
      inkscape:deskcolor="#d1d1d1"
-     inkscape:lockguides="true">
+     inkscape:lockguides="false">
     <sodipodi:guide
-       position="0,250"
+       position="66.570253,5.4100342"
        orientation="0,1"
        inkscape:label="baseline"
        id="guide945"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,1000"
        orientation="0,1"
        inkscape:label="ascender"
        id="guide947"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,950"
        orientation="0,1"
        inkscape:label="caps"
        id="guide949"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,750"
        orientation="0,1"
        inkscape:label="xheight"
        id="guide951"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,0"
        orientation="0,1"
        inkscape:label="descender"
        id="guide953"
-       inkscape:locked="true" />
-    <sodipodi:guide
-       position="0,0"
-       orientation="0,1"
-       inkscape:label="baseline"
-       id="guide1074"
-       inkscape:locked="true"
-       inkscape:color="rgb(0,0,255)" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,160"
        orientation="0,1"
        inkscape:label="ascender"
        id="guide1076"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,189"
        orientation="0,1"
        inkscape:label="caps"
        id="guide1078"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,20"
        orientation="0,1"
        inkscape:label="xheight"
        id="guide1080"
-       inkscape:locked="true"
+       inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
        position="0,40"
        orientation="0,1"
        inkscape:label="decender"
        id="guide1082"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <inkscape:grid
        type="xygrid"
        id="grid1461"

fonts/emilio_20_bold/font.json

@@ -3,7 +3,8 @@
     "description": "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high.",
     "keywords": [
         "display",
-        "monogram"
+        "monogram",
+        "serif"
     ],
     "leading": 200,
     "auto_satin": false,

fonts/emilio_20_bold/→.svg

@@ -21,15 +21,15 @@
      inkscape:pageopacity="0.0"
      inkscape:pagecheckerboard="0"
      showgrid="true"
-     inkscape:zoom="3.4622741"
-     inkscape:cx="113.50921"
-     inkscape:cy="159.72161"
+     inkscape:zoom="2.7657619"
+     inkscape:cx="58.392589"
+     inkscape:cy="179.33575"
      inkscape:window-width="1920"
      inkscape:window-height="991"
      inkscape:window-x="-9"
      inkscape:window-y="-9"
      inkscape:window-maximized="1"
-     inkscape:current-layer="g1168"
+     inkscape:current-layer="g1160"
      inkscape:document-units="mm"
      inkscape:snap-smooth-nodes="true"
      inkscape:snap-global="false"
@@ -41,69 +41,63 @@
      inkscape:snap-intersection-paths="false"
      inkscape:showpageshadow="2"
      inkscape:deskcolor="#d1d1d1"
-     inkscape:lockguides="true">
-    <sodipodi:guide
-       position="0,250"
-       orientation="0,1"
-       inkscape:label="baseline"
-       id="guide945"
-       inkscape:locked="true" />
+     inkscape:lockguides="false">
     <sodipodi:guide
        position="0,1000"
        orientation="0,1"
        inkscape:label="ascender"
        id="guide947"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,950"
        orientation="0,1"
        inkscape:label="caps"
        id="guide949"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,750"
        orientation="0,1"
        inkscape:label="xheight"
        id="guide951"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,0"
        orientation="0,1"
        inkscape:label="descender"
        id="guide953"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
-       position="0,0"
+       position="-5.4234603,5.8401263"
        orientation="0,1"
        inkscape:label="baseline"
        id="guide1074"
-       inkscape:locked="true"
+       inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
        position="0,160"
        orientation="0,1"
        inkscape:label="ascender"
        id="guide1076"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,189"
        orientation="0,1"
        inkscape:label="caps"
        id="guide1078"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <sodipodi:guide
        position="0,20"
        orientation="0,1"
        inkscape:label="xheight"
        id="guide1080"
-       inkscape:locked="true"
+       inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
        position="0,40"
        orientation="0,1"
        inkscape:label="decender"
        id="guide1082"
-       inkscape:locked="true" />
+       inkscape:locked="false" />
     <inkscape:grid
        type="xygrid"
        id="grid1461"
@@ -14554,7 +14548,7 @@ Created by FontForge 20190801 at Tue Aug 24 22:20:47 2021
   <g
      inkscape:groupmode="layer"
      inkscape:label="GlyphLayer-Y"
-     style="display:inline"
+     style="display:none"
      id="g1164">
     <path
        d="m 53,170.254 c -0.0473,-3.91663 0.445532,-7.94412 -1.270411,-11.6068 C 51.152914,156.84818 50.576675,155.04902 50,153.25"
@@ -15238,7 +15232,7 @@ Created by FontForge 20190801 at Tue Aug 24 22:20:47 2021
   <g
      inkscape:groupmode="layer"
      inkscape:label="GlyphLayer-Z"
-     style="display:none"
+     style="display:inline"
      id="g1160">
     <path
        d="M 20,176.278 V 187.5 h 108 v -29.334"

fonts/emilio_20_simple/font.json

@@ -1,15 +1,16 @@
 {
     "name": "Emilio 20 Simple",
-    "description": "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay",
+    "description": "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay",
     "keywords": [
-        "display"
+        "display",
+        "serif"
     ],
     "leading": 194,
     "auto_satin": false,
     "reversible": false,
     "letter_case": "upper",
     "default_glyph": " ",
-    "min_scale": 0.7,
+    "min_scale": 0.5,
     "max_scale": 1.4,
     "size": 42,
     "horiz_adv_x_default": 153,

fonts/emilio_20_simple_small/LICENSE

@@ -0,0 +1,10 @@
+This font has been adapted for Ink/Stitch by Célia Imbert Sabater, with the frame removed by Karen Cravens.
+
+ORIGINAL FONT DOWNLOAD: https://www.1001fonts.com/emilio-20-font.html
+LICENSE: Public Domain 
+
+==========================
+EMILIO 20
+==========================
+
+Based on Emilio 20 by Adien Gunarta.  Used and distributed with permission from the author.

fonts/emilio_20_simple_small/font.json

@@ -0,0 +1,121 @@
+{
+    "name": "Emilio 20 Simple Small",
+    "description": "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font).", 
+    "keywords": [ 
+            "serif",
+            "tiny"
+        ],
+    "leading": 194,
+    "auto_satin": false,
+    "reversible": false,
+    "letter_case": "upper",
+    "default_glyph": " ",
+    "min_scale": 0.15,
+    "max_scale": 0.40,
+    "size": 42,
+    "horiz_adv_x_default": 153,
+    "horiz_adv_x_space": 78,
+    "units_per_em": 194,
+    "horiz_adv_x": {
+        " ": 84,
+        "9": 153,
+        "8": 156,
+        "6": 150,
+        "7": 140,
+        "3": 152,
+        "5": 155,
+        "2": 154,
+        "1": 93,
+        "Z": 152,
+        "Y": 168,
+        "X": 180,
+        "N": 179,
+        "K": 182,
+        "H": 175,
+        "I": 96,
+        "P": 164,
+        "C": 143,
+        "R": 169,
+        "A": 174,
+        "V": 170,
+        "D": 158,
+        "0": 150,
+        "O": 147,
+        "F": 157,
+        "G": 146,
+        "J": 142,
+        "L": 150,
+        "M": 216,
+        "Q": 147,
+        "S": 154,
+        "T": 148,
+        "U": 182,
+        "W": 280,
+        "$": 148,
+        "4": 162,
+        ".": 80,
+        "a": 174,
+        "c": 143,
+        "d": 158,
+        "f": 157,
+        "g": 145,
+        "h": 175,
+        "i": 95,
+        "j": 142,
+        "k": 182,
+        "l": 150,
+        "m": 216,
+        "n": 179,
+        "o": 147,
+        "p": 164,
+        "q": 147,
+        "r": 169,
+        "s": 154,
+        "t": 148,
+        "u": 182,
+        "v": 170,
+        "w": 280,
+        "x": 180,
+        "y": 168,
+        "z": 152
+    },
+    "kerning_pairs": {},
+    "glyphs": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "4",
+        "5",
+        "6",
+        "7",
+        "8",
+        "9",
+        "A",
+        "B",
+        "C",
+        "D",
+        "E",
+        "F",
+        "G",
+        "H",
+        "I",
+        "J",
+        "K",
+        "L",
+        "M",
+        "N",
+        "O",
+        "P",
+        "Q",
+        "R",
+        "S",
+        "T",
+        "U",
+        "V",
+        "W",
+        "X",
+        "Y",
+        "Z"
+    ]
+}

fonts/emilio_20_tricolore/→.svg

@@ -21,7 +21,7 @@
    xmlns:inkstitch="http://inkstitch.org/namespace">
   <sodipodi:namedview
      showguides="true"
-     inkscape:lockguides="true"
+     inkscape:lockguides="false"
      pagecolor="#ffffff"
      bordercolor="#666666"
      borderopacity="1"
@@ -34,9 +34,9 @@
      inkscape:window-height="806"
      id="namedview85"
      showgrid="true"
-     inkscape:zoom="6.388005"
-     inkscape:cx="147.77697"
-     inkscape:cy="205.07185"
+     inkscape:zoom="0.4510385"
+     inkscape:cx="74.273039"
+     inkscape:cy="299.30926"
      inkscape:window-x="0"
      inkscape:window-y="25"
      inkscape:window-maximized="1"
@@ -52,11 +52,11 @@
        id="guide968"
        inkscape:label="baseline"
        orientation="0,1"
-       position="0,0"
-       inkscape:locked="true"
+       position="-10.531252,10.897957"
+       inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
-       inkscape:locked="true"
+       inkscape:locked="false"
        id="guide970"
        inkscape:label="ascender"
        orientation="0,1"
@@ -66,16 +66,16 @@
        inkscape:label="caps"
        orientation="0,1"
        position="0,379"
-       inkscape:locked="true"
+       inkscape:locked="false"
        inkscape:color="rgb(0,0,255)" />
     <sodipodi:guide
-       inkscape:locked="true"
+       inkscape:locked="false"
        id="guide974"
        inkscape:label="xheight"
        orientation="0,1"
        position="0,-20" />
     <sodipodi:guide
-       inkscape:locked="true"
+       inkscape:locked="false"
        id="guide976"
        inkscape:label="decender"
        orientation="0,1"
@@ -3668,7 +3668,7 @@ Created by FontForge 20190801 at Sun Mar 28 13:58:07 2021
   </g>
   <g
      id="g1059"
-     style="display:none"
+     style="display:inline"
      inkscape:label="GlyphLayer-Z"
      inkscape:groupmode="layer">
     <path

fonts/espresso_KOR/→.svg

@@ -27,9 +27,9 @@
      inkscape:window-height="808"
      id="namedview241"
      showgrid="true"
-     inkscape:zoom="2.7346523"
-     inkscape:cx="47.538036"
-     inkscape:cy="97.270135"
+     inkscape:zoom="4.3690343"
+     inkscape:cx="34.904738"
+     inkscape:cy="84.000255"
      inkscape:window-x="0"
      inkscape:window-y="25"
      inkscape:window-maximized="0"
@@ -11286,7 +11286,7 @@ GPL (General Public License) with font-exception and OFL (Open Font License
      inkscape:groupmode="layer"
      id="layer3"
      inkscape:label="GlyphLayer-Ö"
-     style="display:none">
+     style="display:inline">
     <path
        d="M 14.8724,91.3801 C 9.78681,86.004 7.80601,78.4516 6.84439,71.2969 6.22926,63.2948 7.45582,54.7479 11.9735,47.9542 c 1.87704,-2.78602 4.41185,-5.15531 7.38106,-6.73933 M 15.3359,31.0156 C 15.43168,27.68198 15.521826,24.32526 15.234333,21"
        style="display:inline;fill:none;stroke:#000000;stroke-dasharray:0.5, 0.5"

fonts/excalibur_KOR/→.svg

@@ -20,9 +20,9 @@
      inkscape:pageopacity="0.0"
      inkscape:pagecheckerboard="0"
      showgrid="true"
-     inkscape:zoom="2.7791319"
-     inkscape:cx="14.752808"
-     inkscape:cy="92.474921"
+     inkscape:zoom="4.4400974"
+     inkscape:cx="14.977149"
+     inkscape:cy="92.565536"
      inkscape:window-width="1920"
      inkscape:window-height="1001"
      inkscape:window-x="-9"
@@ -32,7 +32,7 @@
      width="150px"
      inkscape:snap-grids="false"
      inkscape:snap-to-guides="false"
-     showguides="false"
+     showguides="true"
      inkscape:guide-bbox="true"
      inkscape:showpageshadow="2"
      inkscape:deskcolor="#d1d1d1">

fonts/excalibur_small/LICENSE

@@ -0,0 +1,96 @@
+This font has been adapted for Ink/Stitch by Corinne Renaud
+
+ORIGINAL FONT DOWNLOAD: https://www.dafont.com/excalibur-nouveau.font
+
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded, 
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.

fonts/glacial_tiny/font.json

@@ -1,6 +1,6 @@
 {
     "name": "Glacial Tiny 60 AGS",
-    "description": "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%.",
+    "description": "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%.",
     "keywords": [
         "sans_serif",
         "tiny"
@@ -10,7 +10,7 @@
     "reversible": true,
     "letter_case": "",
     "default_glyph": " ",
-    "min_scale": 0.4,
+    "min_scale": 0.5,
     "max_scale": 1.5,
     "size": 5.6,
     "horiz_adv_x_default": 20,

fonts/infinipicto/→.svg

@@ -21,15 +21,15 @@
      inkscape:pageopacity="0.0"
      inkscape:pagecheckerboard="0"
      showgrid="true"
-     inkscape:zoom="1.8285339"
-     inkscape:cx="84.767363"
-     inkscape:cy="148.20616"
+     inkscape:zoom="1.0328598"
+     inkscape:cx="84.716243"
+     inkscape:cy="148.1324"
      inkscape:window-width="1440"
      inkscape:window-height="796"
      inkscape:window-x="0"
      inkscape:window-y="25"
      inkscape:window-maximized="0"
-     inkscape:current-layer="g1114"
+     inkscape:current-layer="g1206"
      inkscape:document-units="px"
      inkscape:snap-grids="false"
      inkscape:snap-global="false"
@@ -346,7 +346,7 @@ Sandrine Nugue
      style="display:none"
      id="g1106">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 93.601367,109.25 49.500003,-30 5.5,-36.5 3,-2 46,57.75 -3,2 -37,-4.25 -48.5,50.25 z"
        id="path6746"
        sodipodi:nodetypes="ccccccccc"
@@ -358,7 +358,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path7131"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 109.10137,146.5 41.75,101 v 2.5 h -46.5 L 90.351367,206.25 h -65.25 l -13.75,43.75 h -42 v -2.5 l 19.5,-44.5 62.5,-143 h 21.75 l 20.5,49.25 z m -26.250003,36 -25.5,-79.5 -24.75,79.5 z"
        inkstitch:angle="45"
        inkstitch:expand_mm="0.3"
@@ -378,7 +378,8 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
        d="m -8.35107,196.595 0.52038,-1.191"
        style="fill:none;stroke:#008000;stroke-width:1px;stroke-dasharray:3, 1"
@@ -400,7 +401,8 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
        id="path1104"
        style="display:inline;fill:none;stroke:#008000;stroke-width:0.25"
@@ -415,7 +417,8 @@ Sandrine Nugue
        inkstitch:reverse_rails="none"
        sodipodi:nodetypes="cssccssccc"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
   </g>
   <g
      inkscape:groupmode="layer"
@@ -464,7 +467,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path1108"
-       style="fill:#559bff;fill-opacity:1;stroke-width:0.25"
+       style="display:inline;fill:#559bff;fill-opacity:1;stroke-width:0.25"
        d="m 47.851367,5 h 59.750003 c 39,0 58.75,17.25 58.75,41.75 0,19.75 -12.25,37.5 -38,45 v 2.5 c 26.75,4.75 36,20.5 36,38.75 0,22.75 -19.25,59.5 -80.250003,59.5 h -52.75 l 14.5,-98.5 z m 31.75,89 -2,68.5 h 13.25 c 25.250003,0 36.250003,-16.5 36.250003,-34.25 0,-16.5 -14,-24 -27.750003,-26.25 l 1.250003,-16.5 c 18,-3.25 28,-11.5 28,-27.25 0,-12.75 -8,-22 -29.500003,-22 h -10.75 z"
        inkstitch:angle="135"
        inkstitch:expand_mm="0.2"
@@ -482,7 +485,7 @@ Sandrine Nugue
     <path
        d="m 85.601367,238.25 c -8.75,5.75 -32.25,14.25 -55,14.25 -54,0 -96,-37 -96,-97 0,-59.25 38.75,-95.5 99.25,-95.5 15.75,0 37.5,3.25 52.75,6 v 0.25 c 6.5,-6 14.750003,-8.75 24.750003,-8.75 17.25,0 35.25,12 35.25,32.5 0,6 -2,12.25 -4,15 -11.75,-16 -25.25,-21.75 -38.75,-21.75 -5.000003,0 -10.000003,0.75 -14.750003,2 4.5,16.75 17.750003,24.5 38.500003,25.5 -7.25,8.75 -15.75,11 -23.25,11 -10.250003,0 -18.500003,-5.5 -22.000003,-13.5 -13.75,-8.75 -30.75,-14.5 -53.5,-14.5 -26.5000003,0 -57.25,16 -57.25,59.5 0,37.5 18.25,68.25 61,68.25 17.25,0 33.5,-4 48.25,-12.25 -0.25,-1 -0.25,-2.25 -0.25,-3.5 0,-12.5 10.25,-22 23.750003,-22 7.5,0 16,2.25 23.25,11 -20.75,1 -34.250003,8.75 -38.500003,25.5 4.75,1.25 9.75,2 14.750003,2 13.5,0 27,-5.75 38.75,-21.75 2,2.75 4,9 4,15 0,20.5 -18,32.5 -35.25,32.5 -10.5,0 -19.000003,-3 -25.750003,-9.75 z"
        id="path1112"
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        inkstitch:angle="45"
        inkstitch:expand_mm="0.2"
        inkstitch:running_stitch_length_mm="2"
@@ -498,7 +501,7 @@ Sandrine Nugue
      id="g1118">
     <path
        id="path1116"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -58.898633,250 5.75,-98.5 -5.75,-89 h 76.5 c 54.5,0 94.250003,30.5 94.250003,90 0,55.5 -37.750003,97.5 -96.500003,97.5 z m 39.5,-98.5 3.75,68.5 h 31 c 33.5,0 59.5,-23 59.5,-68.75 -0.25,-37.25 -23.25,-57.5 -62,-57.5 h -28.75 z"
        inkstitch:angle="45"
        inkstitch:expand_mm="0.2"
@@ -508,7 +511,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 4.3513667,206.25 c -6.5,0 -11.75,-5.25 -11.75,-11.75 0,-6.25 5.25,-11.5 11.75,-11.5 6.5000003,0 11.5000003,5.25 11.5000003,11.5 0,6.5 -5,11.75 -11.5000003,11.75 z"
        id="path22765"
        inkstitch:angle="45"
@@ -518,7 +521,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#00ff00;fill-rule:evenodd;stroke-width:0.25"
+       style="display:inline;fill:#00ff00;fill-rule:evenodd;stroke-width:0.25"
        d="m 20.851367,170.25 2.360352,-0.23828 2.17871,-0.6836 1.956055,-1.08203 1.692383,-1.43359 1.387695,-1.73828 1.041992,-1.9961 0.655274,-2.20703 0.227539,-2.37109 -0.227539,-2.28857 -0.655274,-2.14502 -1.041992,-1.95166 -1.387695,-1.7085 -1.692383,-1.41553 -1.956055,-1.07275 -2.17871,-0.68018 L 20.851367,147 l -2.288574,0.23779 -2.14502,0.68018 -1.95166,1.07275 -1.708496,1.41553 -1.415528,1.7085 -1.072754,1.95166 -0.6801755,2.14502 -0.237793,2.28857 0.237793,2.37109 0.6801755,2.20703 1.072754,1.9961 1.415528,1.73828 1.708496,1.43359 1.95166,1.08203 2.14502,0.6836 z"
        id="path22763"
        inkstitch:angle="135"
@@ -528,7 +531,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#0000ff;stroke-width:0.25"
+       style="display:inline;fill:#0000ff;stroke-width:0.25"
        d="m 37.601367,134.25 c -6.5,0 -11.75,-5.25 -11.75,-11.75 0,-6.25 5,-11.5 11.75,-11.5 6.5,0 11.5,5.25 11.5,11.5 0,6.5 -5,11.75 -11.5,11.75 z"
        id="path22761"
        inkstitch:angle="45"
@@ -545,7 +548,7 @@ Sandrine Nugue
      style="display:none"
      id="g1122">
     <path
-       style="fill:#c87137;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke-width:0.25"
        d="M 44.746583,250 H 11.351367 c -52.5,0 -81.75,-20.25 -81.75,-58.5 0,-29 15.25,-40.75 28.75,-51.5 11.25,-8.75 21.25,-16.75 21.25,-32.5 0,-13.5 -8,-20.25 -18.75,-20.25 -8.25,0 -13.75,5 -16.25,10 h -2.5 v -17 c 9.25,-13 22.25,-22.75 43.5,-22.75 26.75,0 46.25,17.75 46.25,46 0,40.75 -28.7500003,50.25 -28.7500003,85.25 0,18 16.0000003,35 41.2500003,43.5 z"
        id="path2516"
        sodipodi:nodetypes="csscsscccssscc"
@@ -557,7 +560,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#800000;stroke-width:0.25"
+       style="display:inline;fill:#800000;stroke-width:0.25"
        d="m 44.351367,232.25 4.75,-80.75 -5.75,-89 H 150.60137 l 5.25,37.75 h -2.5 l -66.250003,-16 -3.75,57.25 63.250003,-2 -2.5,32.5 -60.750003,-11 3.75,67 66.750003,-20 h 2.5 l -5,42 H 44.746583 Z"
        id="path1120"
        sodipodi:nodetypes="ccccccccccccccccc"
@@ -575,7 +578,7 @@ Sandrine Nugue
      style="display:none"
      id="g1126">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 28.851367,148.5 -5.5,-86 H 133.35137 l 5,37.75 h -2.5 L 67.101367,84 l -4,64 z"
        id="path26032"
        sodipodi:nodetypes="cccccccc"
@@ -587,7 +590,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 63.851367,171.5 4.5,78.5 h -45 l 4.75,-80.75 z"
        id="path1124"
        sodipodi:nodetypes="ccccc"
@@ -598,7 +601,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 28.101367,169.25 -47.5,-3 19.49999974,17.25 V 201 H -2.3986333 L -69.148633,161 v -7 l 66.7499997,-39.75 h 2.50000004 v 17.5 l -20.74999974,17.5 49.5,-0.75 34.25,-0.5 68.500003,-1.25 -2.5,28.75 -65.250003,-4 z"
        id="path26030"
        sodipodi:nodetypes="ccccccccccccccccc"
@@ -616,7 +619,7 @@ Sandrine Nugue
      style="display:none"
      id="g1130">
     <path
-       style="fill:#c87137;stroke:none;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke:none;stroke-width:0.25"
        d="m 244.35137,221.5 c -5.75,0 -10.25,-4.5 -10.25,-10.25 0,-5.5 4.5,-10.25 10.25,-10.25 5.5,0 10.25,4.75 10.25,10.25 0,5.75 -4.75,10.25 -10.25,10.25 z"
        id="path27055"
        inkstitch:angle="135"
@@ -627,7 +630,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#c87137;stroke:none;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke:none;stroke-width:0.25"
        d="m 209.35137,219.75 c -5.75,0 -10.25,-4.5 -10.25,-10.25 0,-5.5 4.5,-10.25 10.25,-10.25 5.5,0 10.25,4.75 10.25,10.25 0,5.75 -4.75,10.25 -10.25,10.25 z"
        id="path27053"
        inkstitch:angle="135"
@@ -637,7 +640,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#c87137;stroke:none;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke:none;stroke-width:0.25"
        d="m 209.35137,146.25 c -5.5,0 -10.25,-4.5 -10.25,-10.25 0,-5.5 4.75,-10.25 10.25,-10.25 5.75,0 10.25,4.75 10.25,10.25 0,5.75 -4.5,10.25 -10.25,10.25 z"
        id="path27051"
        inkstitch:angle="135"
@@ -647,7 +650,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#c87137;stroke:none;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke:none;stroke-width:0.25"
        d="m 244.35137,144.5 c -5.5,0 -10.25,-4.5 -10.25,-10.25 0,-5.5 4.75,-10.25 10.25,-10.25 5.75,0 10.25,4.75 10.25,10.25 0,5.75 -4.5,10.25 -10.25,10.25 z"
        id="path27049"
        inkstitch:angle="135"
@@ -657,7 +660,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 98.851367,232.5 c -19,13.25 -42.25,20 -67,20 -54.75,0 -97.25,-36 -97.25,-97 0,-59.25 37,-95.5 102.5,-95.5 18,0 46,3.75 55.5,6.25 l 5.25,47 h -2.5 c -12.25,-9.25 -33.25,-19.5 -61.75,-19.5 -33.75000026,0 -62,16 -62,59.5 0,38.75 21.7499997,68.25 62,68.25 15.25,0 31.5,-3 41,-9.5 l -26.25,-52.75 v -2.5 h 50 L 271.85137,150.5 V 195 l -170.25,-6.75 z"
        id="path1128"
        inkstitch:angle="45"
@@ -674,7 +677,7 @@ Sandrine Nugue
      style="display:none"
      id="g1134">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 107.35137,107.75 -2.75,43.75 5.5,98.5 H 65.101367 l 4.75,-83.5 h -88.5 l 4.75,83.5 h -45 l 5.75,-98.5 -5.75,-89 h 45 l -5,80.25 h 89.25 l -5.25,-80.25 h 43.250003 z"
        id="path28322"
        sodipodi:nodetypes="cccccccccccccccc"
@@ -686,7 +689,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#b3b3b3;stroke-width:0.25"
+       style="display:inline;fill:#b3b3b3;stroke-width:0.25"
        d="m 108.35137,62.5 c 18,-0.75 43.75,-6.5 54,-28.25 14,0 34,18.5 34,49 0,28.75 -13,49.75 -34.5,52.5 -10.25,-22.25 -35.75,-27.75 -54.5,-28 z"
        id="path1132"
        sodipodi:nodetypes="ccsccc"
@@ -732,7 +735,7 @@ Sandrine Nugue
      style="display:none"
      id="g1142">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m -60.648633,212.75 c 10.25,3.75 22.5,7 30.5,7 13.5,0 19.5,-8.5 20.2499997,-27.75 l 0.25,-8 c 0,-4.75 -0.25,-9.75 -0.7499997,-15.25 l -8,-106.25 h 45 l -2.75,134.25 c -0.25,14.5 -3,26.5 -8.75,35.5 -5.1920241,6.2319 -10.8483157,10.60674 -16.5000003,15 -7,3.5 -15.9999997,5.25 -26.4999997,5.25 -10,0 -24,-2.5 -33.75,-5 l -10,-38 z"
        id="path36167"
        sodipodi:nodetypes="csccccccccsccc"
@@ -744,7 +747,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path30411"
-       style="fill:none;stroke:#ff0000;stroke-width:0.755906;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       style="display:inline;fill:none;stroke:#ff0000;stroke-width:0.755906;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
        d="M -9.6486333,184 -71.648633,209.5 M -9.8986333,192 -60.648633,212.75 M -40.25,194 l 4,11.5"
        inkstitch:satin_column="True"
        inkstitch:pull_compensation_mm="0.3"
@@ -753,9 +756,10 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 38.601367,187.5 45.25,-19.75 v 4.75 l -45.25,20 z"
        id="path30142"
        inkstitch:angle="25"
@@ -763,7 +767,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 39.101367,175 45.25,-19.75 V 160 l -45.25,20 z"
        id="path30140"
        inkstitch:angle="25"
@@ -771,7 +775,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 39.351367,162.5 45.25,-19.75 v 4.75 l -45.25,20 z"
        id="path30138"
        inkstitch:angle="25"
@@ -779,7 +783,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 39.351367,141.75 V 79 l 55.5,-24.25 v 62.5 z"
        id="path30130"
        inkstitch:angle="25"
@@ -787,7 +791,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 155.85137,3.75 h -32 L -18.398633,62.5 h 45 z"
        id="path30885"
        sodipodi:nodetypes="ccccc"
@@ -798,7 +802,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 103.60137,50.75 33.75,-15 v 4.5 l -33.75,15.5 z"
        id="path30126"
        inkstitch:angle="25"
@@ -806,7 +810,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 103.60137,63.25 33.75,-15 v 4.5 l -33.75,15.5 z"
        id="path30128"
        inkstitch:angle="25"
@@ -814,7 +818,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 103.60137,75.75 33.75,-15 v 4.5 l -33.75,15.5 z"
        id="path30132"
        inkstitch:angle="25"
@@ -822,7 +826,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 103.60137,88.25 33.75,-15 v 4.5 l -33.75,15.5 z"
        id="path30134"
        inkstitch:angle="25"
@@ -830,7 +834,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 91.60156,199 c 5.5,-6.25 7.75,-10.75 7.75,-25 v -37.5 l 38,-16.75 v 37.75 c 0,6.75 0.25,12.75 -1,17.5 -11.46923,10.16453 -28.32986,17.25289 -44.75,24 z"
        id="path32261"
        sodipodi:nodetypes="csccscc"
@@ -840,7 +844,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:none;stroke:#000000;stroke-width:0.755906;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       style="display:inline;fill:none;stroke:#000000;stroke-width:0.755906;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
        d="m 155.85137,3.75 0.25,136.5 c 0,26 -11.75,42.25 -39.75,54.75 L -1.3986333,247.25 M 148.81905,6.9465142 149.85156,137.75 c 0,17.75 -5.75,29.25 -13.5,37.25 -8.51263,7.85544 -23.20833,14.125 -44.75,24 l -76.5,33.25 m 30.648439,-16.75 -1,14 M 129.25,177 l 0.5,15.5 m 16.5,-58.5 14,-1 m -15,-115.499999 16,-0.5"
        id="path30908"
        sodipodi:nodetypes="ccccccccc"
@@ -852,7 +856,8 @@ Sandrine Nugue
        inkstitch:force_lock_stitches="True"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
   </g>
   <g
      inkscape:groupmode="layer"
@@ -860,7 +865,7 @@ Sandrine Nugue
      style="display:none"
      id="g1146">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -58.898633,250 5.75,-98.5 -5.75,-89 h 45 l -5.5,89 5.5,98.5 z"
        id="path1438"
        inkstitch:angle="45"
@@ -879,7 +884,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m -6.6486333,153 c -3.7169697,-4.1227 -4.9999997,-10 -4.9999997,-16 0,-15.75 12.7499997,-28.5 28.25,-28.5 5.5,0 10.5,1.5 14.75,4 l 32.25,-55 38.500003,38.5 -60.000003,28.5 c 2,3.75 3,8 3,12.5 0,11 -6.00737,20.99133 -15.25,25.25 -12.249936,5.64433 -27.5817005,0.64178 -36.5000003,-9.25 z"
        id="path1442"
        sodipodi:nodetypes="sssccccsss"
@@ -888,7 +893,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:none;stroke:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:none;stroke:#ff0000;stroke-width:0.25"
        d="m 138.85137,74 -38,10 m 38,-21 -42.500003,16.5 m -0.05841,-2.93593 7.519693,8.066572"
        id="path1440"
        sodipodi:nodetypes="cccc"
@@ -902,9 +907,10 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
-       style="fill:none;stroke:#ffcc00;stroke-width:0.25"
+       style="display:inline;fill:none;stroke:#ffcc00;stroke-width:0.25"
        d="M 130.85137,41.75 91.351367,74.25 M 122.10137,33 87.351367,70.25 m -0.218751,-4.213489 7.246242,7.656407"
        id="path1436"
        sodipodi:nodetypes="cccc"
@@ -918,9 +924,10 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
-       style="fill:none;stroke:#00ff00;stroke-width:0.25"
+       style="display:inline;fill:none;stroke:#00ff00;stroke-width:0.25"
        d="M 101.35137,23.75 82.351367,65.5 m 7.5,-41.75 -12,37.25 m -0.972868,-4.533998 7.793129,7.793128"
        id="path1144"
        sodipodi:nodetypes="cccc"
@@ -936,7 +943,8 @@ Sandrine Nugue
        inkstitch:force_lock_stitches="True"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
   </g>
   <g
      inkscape:groupmode="layer"
@@ -944,7 +952,7 @@ Sandrine Nugue
      style="display:none"
      id="g1150">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 21.851367,250 H 3.8513667 -55.398633 h -3 v -0.25 l 5.75,-98.25 -5.75,-89 h 44 l -6,164.75 74,-21.25 h 2.5 l -3.75,33.25 z"
        id="path5652"
        sodipodi:nodetypes="ccccccccccccc"
@@ -956,7 +964,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 33.351367,290.25 c 0,12 -2.75,24.5 -10.25,31.5 V 322 c 1,0.5 2.75,1 5,1 12.75,0 18.25,-17 18.25,-33.75 0,-16.25 -8.75,-32.25 -24.5,-39.25 l 30.5,-10.75 c 18.5,15 26,33 26,54.75 0,30.75 -17.25,66.25 -58.25,66.25 -18.7500003,0 -37,-12 -37,-34 0,-18.75 9.2499997,-26 9.2499997,-41.5 0,-11 -4.9999997,-31.25 -47.7499997,-34.75 H 3.8513667 c 16.7500003,6.75 29.5000003,22.25 29.5000003,40.25"
        id="path5656"
        sodipodi:nodetypes="cccssccssssccc"
@@ -974,7 +982,7 @@ Sandrine Nugue
      style="display:none"
      id="g1154">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 53.65157,212.20472 4.3513667,62.5 H -13.398633 l -55.75,187.5 58.75,-68.5 13.2499997,-53 h 0.75 l 24.0000003,58.25 26.050203,25.45472"
        id="path4423"
        inkstitch:angle="45"
@@ -985,7 +993,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 53.65157,212.20472 87.259343,184.87401 112.10137,127.25 h 0.75 l 14.75,59.75 46.52996,26.28754 L 130.10137,62.5 h -18.25 l -58.1998,149.70472"
        id="path5721"
        inkstitch:angle="45"
@@ -995,7 +1003,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#00ff00;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       style="display:inline;fill:#00ff00;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
        d="m -69.148633,250 58.75,-68.5 6.2499997,26.75 h 0.5 L 8.8513665,180.5 h 0.75 L 23.601367,203 h 0.75 l 3.046756,-16.75099 26.253447,25.95571 33.607773,-27.33071 5.592024,27.37599 h 0.75 l 16.250003,-34.5 h 0.75 l 11,31.25 h 0.75 l 5.25,-22 46.99509,25.20472 L 184.85137,250 Z"
        id="path5028"
        sodipodi:nodetypes="ccccccccccccccccccccc"
@@ -1014,7 +1022,7 @@ Sandrine Nugue
      id="g1158">
     <path
        id="path3635"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 68.601562,109.5 -3.75,140.5 H 106.85156 L 98.101562,131.25 209.10156,250 h 7.75 l 5.75,-133 c -12.021,2.26583 -23.75091,8.06043 -36.5,1.5 l 3.75,64.75 -49.5,-53.25 C 110.88124,125.65618 85.327894,119.55651 68.601562,109.5 Z"
        transform="translate(-93.75)"
        inkstitch:angle="45"
@@ -1027,7 +1035,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ffd5d5;stroke-width:0.25"
+       style="display:inline;fill:#ffd5d5;stroke-width:0.25"
        d="m -25.148633,109.5 c -33.75,-0.75 -44,-16 -44,-31.5 0,-21 14,-30.75 33.25,-30.75 7.25,0 15.5,1.5 20.25,3 3,-14 17.4999997,-33 54.5,-33 27.75,0 46.75,10 53.25,27 9.250003,-4 18.500003,-6.25 29.500003,-6.25 26,0 45.25,15.5 45.25,37.5 0,18.75 -11.5,40.25 -38,41.5 -12.021,2.26583 -23.75092,8.06043 -36.500003,1.5 -10.75,8 -26.5,15 -45.75,11.5 -29.470327,-4.34382 -55.023669,-10.44349 -71.75,-20.5 z"
        id="path3639"
        sodipodi:nodetypes="csscscsscccc"
@@ -1043,7 +1051,7 @@ Sandrine Nugue
      style="display:none"
      id="g1162">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 53.351367,189.5 h -5 c -13.5,-11 -22,-20.5 -28.5,-30.75 v -1.5 c 7.5,-7 19,-11.25 31,-11.25 12,0 23.5,4.25 31,11.25 v 1.5 c -6.5,10.25 -15,19.75 -28.5,30.75 z"
        id="path1091"
        inkstitch:angle="135"
@@ -1055,7 +1063,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path1160"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 52.031253,252.49998 C -4.6791069,252.46066 -41.648633,204.72971 -41.648633,155.5 c 0,-11.25 1.5,-22 4.25,-31.5 -16,-3 -28,-16 -28,-35.25 0,-22 16,-35.75 35.75,-35.75 14.25,0 26.7499997,7.25 32.4999997,19.25 C 17.101367,64.25 33.851367,60 52.101367,60 c 18.25,0 35,4.25 49.250003,12.25 5.75,-12 18,-19.25 32.25,-19.25 19.75,0 36,13.75 36,35.75 0,19.25 -12,32 -28,35.25 2.75,9.5 4.25,20 4.25,31.5 0,47.98452 -36.97615,96.9684 -93.69512,96.99998 -0.04248,4e-5 -0.08561,0 -0.124997,0 z M 52.101367,222.5 c 32.5,-0.25 56.750003,-29.25 56.750003,-66.25 -0.25,-38 -22.500003,-62.75 -56.750003,-62.5 -34.25,-0.5 -56.7500003,25 -56.7500003,62.25 0,37.25 24.0000003,66 56.7500003,66.5 z"
        sodipodi:nodetypes="cscsscscsscscccccsc"
        inkstitch:angle="45"
@@ -1073,7 +1081,7 @@ Sandrine Nugue
      id="g1166">
     <path
        id="path2946"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 34.851562,62.5 5.75,89 -5.75,98.5 h 45 l -5.5,-98.5 3.5,-57.75 h 8.5 c 10.205334,0 18.532898,1.308926 25.087888,3.753906 9.51024,-20.113162 26.5683,-13.808265 40.91211,-17.003906 -11.5,-11 -29.75,-18 -53.499998,-18 z"
        transform="translate(-93.75)"
        inkstitch:angle="45"
@@ -1084,7 +1092,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 7.6013667,140.25 c -7.74999996,0 -14.25,-6.5 -14.25,-14.25 0,-8 6.50000004,-14.25 14.25,-14.25 8.0000003,0 14.2500003,6.25 14.2500003,14.25 0,7.75 -6.25,14.25 -14.2500003,14.25 z"
        id="path2948"
        inkstitch:angle="45"
@@ -1094,7 +1102,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#b3b3b3;stroke-width:0.25"
+       style="display:inline;fill:#b3b3b3;stroke-width:0.25"
        d="M 58.601367,80.5 185.85137,87 v 16 L 71.601367,102.5 c 0.75,3.5 1.5,7 1.75,10.5 l 112.500003,4 v 16.75 c -40,3 -49.25,16.75 -70.5,39.75 -18.250003,20 -35.000003,29 -59.500003,29 -25,0 -45.25,-10.25 -58.0000003,-22.5 h 0.25 v -22 c 24.7500003,0 38.5000003,-11.5 38.5000003,-34.25 0,-12.25872 -6.037395,-21.44386 -18.912301,-26.246135 C 27.199298,77.390703 44.257558,83.695641 58.601367,80.5 Z"
        id="path1164"
        sodipodi:nodetypes="ccccccccscccscc"
@@ -1114,7 +1122,7 @@ Sandrine Nugue
      id="g1170">
     <path
        id="path1168"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 45.351367,251 c -5.5,1 -11,1.5 -17,1.5 -56.75,0 -93.75,-47.75 -93.75,-97 0,-59 40.5,-95.5 93.75,-95.5 53.25,0 93.750003,36.5 93.750003,95.5 0,33.25 -17.75,66.75 -47.250003,84.5 z m -17,-28.5 c 32.5,-0.25 56.75,-29.25 56.75,-66.25 -0.25,-38 -22.5,-62.75 -56.75,-62.5 -34.2500003,-0.5 -56.75,25 -56.75,62.25 0,37.25 23.9999997,66 56.75,66.5 z"
        sodipodi:nodetypes="csssscccccsc"
        inkstitch:angle="45"
@@ -1125,7 +1133,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 74.851367,240 c 32.000003,19.5 113.000003,-3.5 109.500003,84.25 l -25.25,32.75 h -2.5 c -5.75,-64.25 -93.250003,-17.75 -111.250003,-106 z"
        id="path4660"
        sodipodi:nodetypes="cccccc"
@@ -1143,7 +1151,7 @@ Sandrine Nugue
      style="display:none"
      id="g1174">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m -2.6486333,163.75 v -11.5 c 20.7500003,-3.5 31.7500003,-12.75 31.7500003,-32 0,-16.5 -15.25,-26.5 -34.0000003,-26.5 H -15.898633 l -3.5,57.75 5.5,98.5 h -45 l 5.75,-98.5 -5.75,-89 H 3.3513667 c 41.5000003,0 62.5000003,20 62.5000003,48.25 0,21 -11,39 -39.25,47.75"
        id="path7081"
        inkstitch:angle="135"
@@ -1155,7 +1163,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path1172"
-       style="fill:#4d4d4d;stroke-width:0.25"
+       style="display:inline;fill:#4d4d4d;stroke-width:0.25"
        d="m 23.101367,186.5 h 11.75 l -13,-18.5 h -8.75 z m 19.75,36 h 17.25 l -14.75,-21 h -14 z m 25.25,46 h 24.25 l -18.25,-26 h -20.25 z m -41.5,-110 L 165.35137,310 v 2.5 h -42.25 l -16.5,-23.75 H 79.101367 l 13,23.75 h -43.5 L -2.6486333,163.75"
        inkstitch:angle="45"
        inkstitch:expand_mm="0.2"
@@ -1165,7 +1173,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path3"
-       style="fill:none;stroke:#00ff00;stroke-width:1px"
+       style="display:inline;fill:none;stroke:#00ff00;stroke-width:1px"
        d="M 53.998101,313.68871 2.3461417,162.50897 M 44.089808,313.9021 -2.4890993,164.02459 m 34.5683503,71.4335 -13.534676,4.20631"
        inkstitch:satin_column="true"
        sodipodi:nodetypes="cccccc"
@@ -1175,10 +1183,11 @@ Sandrine Nugue
        inkstitch:max_stitch_length_mm="4"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
     <path
        id="path8"
-       style="fill:none;stroke:#00ff00;stroke-width:1px"
+       style="display:inline;fill:none;stroke:#00ff00;stroke-width:1px"
        d="M 24.728039,159.11369 161.86732,313.19084 M 30.085417,157.24203 174.60582,313.02943 m -83.855526,-73.99317 10.452146,-9.57252"
        inkstitch:satin_column="true"
        sodipodi:nodetypes="cccccc"
@@ -1190,7 +1199,8 @@ Sandrine Nugue
        inkstitch:force_lock_stitches="True"
        inkstitch:reverse_rails="none"
        inkstitch:min_stitch_length_mm="0.5"
-       inkstitch:min_jump_stitch_length_mm="3" />
+       inkstitch:min_jump_stitch_length_mm="3"
+       inkstitch:zigzag_underlay_max_stitch_length_mm="4" />
   </g>
   <g
      inkscape:groupmode="layer"
@@ -1198,7 +1208,7 @@ Sandrine Nugue
      style="display:none"
      id="g1178">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 87.101367,96.25 18.000003,7.75 21.25,-5.75 2.5,12.5 -21.25,2.25 11.75,18.75 -11.75,6.25 -8.250003,-20.25 -18,-7.5 z"
        id="path1027"
        sodipodi:nodetypes="cccccccccc"
@@ -1212,7 +1222,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path1176"
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 47.601367,75.75 c -1,5.5 3.5,10.5 9,11 5.5,0.75 10.25,-3.25 11,-8.75 0.75,-5.75 -3.5,-10.5 -9,-11 -5.25,-0.5 -10.5,3 -11,8.75 z m -11.5,25.75 c -0.5,5.25 3.25,10.75 8.75,11 5.5,0.5 10.75,-3.25 11.25,-8.75 0.75,-5.75 -3.5,-10.5 -9,-11.25 -5.25,-0.75 -10.5,3.25 -11,9 z m 45.25,8.75 c -8.5,9.5 -27.75,15.25 -49.25,7 C 17.351367,111.5 9.8513665,101 8.3513665,89.5 3.8513667,88.25 -0.39863326,87.75 -4.8986333,87.75 -17.648633,87.75 -26.898633,95.5 -26.898633,106 c 0,9.25 3.75,16.25 19.9999997,27.25 L 11.101367,145.5 c 23.5,16 36.75,29.25 36.75,54 0,25.5 -16.75,53 -59.5,53 -11,0 -37.25,-2.25 -49.75,-5.75 l -5,-45.25 h 2.5 c 23.5,19 37.75,25.25 50.5,25.25 14.24999974,0 22.4999995,-8.75 22.4999995,-21 0,-12.25 -4.4999998,-20 -26.7499995,-34.25 l -17.25,-11 c -24,-15.25 -31.25,-33.75 -31.25,-51 0,-26.5 20,-49.5 57.7499997,-49.5 8.75000004,0 17.9999998,0.5 26.5000003,1.5 8.25,-7.5 22,-10.75 37.75,-4.75 24.25,9.5 33,25.25 31.25,39.5 z"
        inkstitch:angle="135"
        inkstitch:expand_mm="0.2"
@@ -1230,7 +1240,7 @@ Sandrine Nugue
      style="display:none"
      id="g1182">
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 68.851367,62.5 4,-70.25 h 9 L 107.10137,20.5 v 5 l -17.750003,-5 5.25,42 z"
        id="path1568"
        sodipodi:nodetypes="cccccccc"
@@ -1241,7 +1251,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 2.3513667,62.5 5.9999998,-43.25 -14.2499998,10 h -7.4999997 l 24.25,-36.75 h 7 l 24,36.75 h -7.5 l -14.25,-10 h -0.25 l 7.25,43.25 z"
        id="path1564"
        sodipodi:nodetypes="cccccccccccc"
@@ -1252,7 +1262,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m -64.523633,62.5 5.375,-41.75 -17.75,5 v -5 l 25.25,-28.25 h 9 l 3.75,70 z"
        id="path1993"
        sodipodi:nodetypes="cccccccc"
@@ -1263,7 +1273,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;fill-opacity:1;stroke-width:0.25"
+       style="display:inline;fill:#000000;fill-opacity:1;stroke-width:0.25"
        d="m -69.898633,104.75 5.375,-42.25 h 25.625 41.2499997 24.7500003 41.75 25.75 l 5,42.25 h -2.5 l -67.75,-17.5 7.25,162.75 H -8.1486333 L -0.14863326,87.5 -67.398633,104.75 h -2.5"
        id="path1180"
        sodipodi:nodetypes="ccccccccccccccc"
@@ -1312,7 +1322,7 @@ Sandrine Nugue
      style="display:none"
      id="g1190">
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 133.60137,131 79.851367,252.5 h -21.75 L 8.1013667,131.75 l -15.5,-37 L -19.648633,65 v -2.5 h 46.5 l 47,147 47.000003,-147 h 42 V 65 l -13,29.25 z"
        id="path8438"
        sodipodi:nodetypes="cccccccccccccc"
@@ -1324,7 +1334,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#c87137;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke-width:0.25"
        d="m 149.85137,94.25 c 3.25,0.5 6.75,1 10.25,1 16.75,0 26.75,-3 28.5,-21.5 l 2.5,-27.25 h 14.75 c 1.25,10.5 4,32.25 4,45.75 0,28.5 -23.75,41.25 -50,41.25 -11.5,0 -18,-0.75 -26.25,-2.5 z"
        id="path8436"
        sodipodi:nodetypes="cscccsscc"
@@ -1335,7 +1345,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#c87137;stroke-width:0.25"
+       style="display:inline;fill:#c87137;stroke-width:0.25"
        d="m 8.1013667,131.75 c -7.49999996,1.5 -14,2.25 -24.7499997,2.25 -26.25,0 -50,-12.75 -50,-41.25 0,-13.5 2.75,-35.25 4,-45.75 h 14.75 l 2.5,27.25 c 1.75,18.5 11.75,21.5 28.5,21.5 3.25,0 6.5,-0.25 9.4999997,-1 z"
        id="path1188"
        sodipodi:nodetypes="csscccscc"
@@ -1429,7 +1439,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       style="display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
        d="M 0.601367,50.75 H 59.35137 l -36.25,101.75 z"
        id="path14243"
        inkstitch:angle="45"
@@ -1439,7 +1449,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -47.898633,50.75 h -15 v -20 H 198.35137 v 20 h -15 z"
        id="path1192"
        sodipodi:nodetypes="ccccccc"
@@ -1526,16 +1536,20 @@ Sandrine Nugue
        id="path15821"
        sodipodi:nodetypes="sssss"
        inkstitch:expand_mm="0.3"
-       inkstitch:ties="1" />
+       inkstitch:ties="1"
+       inkstitch:min_stitch_length_mm=".3"
+       inkstitch:min_jump_stitch_length_mm="3" />
     <path
        style="fill:#0000ff;stroke:none;stroke-width:0.25"
        d="m 129.35137,168 c -3.25,0 -5.75,-2.5 -5.75,-5.5 0,-3.25 2.5,-5.75 5.75,-5.75 3,0 5.5,2.5 5.5,5.75 0,3 -2.5,5.5 -5.5,5.5 z"
        id="path15819"
        sodipodi:nodetypes="sssss"
-       inkstitch:expand_mm="0.3" />
+       inkstitch:expand_mm="0.3"
+       inkstitch:min_stitch_length_mm=".3"
+       inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path15813"
-       style="fill:#800000;stroke-width:0.25"
+       style="display:inline;fill:#800000;stroke-width:0.25"
        d="m 88.351367,162.25 c 9.25,-16 18.500003,-30 40.500003,-30 22,0 31.25,14.25 40.5,30 -9.25,15.25 -18.5,30 -40.5,30 -22,0 -31.250003,-14.5 -40.500003,-30 z m 41.000003,16 c 8.75,0 16,-7.25 16,-16 0,-8.75 -7.25,-16 -16,-16 -8.75,0 -16,7.25 -16,16 0,8.75 7.25,16 16,16 z"
        inkstitch:angle="45"
        inkstitch:expand_mm="0.2"
@@ -1545,7 +1559,7 @@ Sandrine Nugue
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
        id="path15811"
-       style="fill:#800000;stroke-width:0.25"
+       style="display:inline;fill:#800000;stroke-width:0.25"
        d="m -71.648633,162.25 c 9.25,-16 18.5,-30 40.5,-30 21.9999997,0 31.24999974,14.25 40.4999995,30 -9.24999976,15.25 -18.4999998,30 -40.4999995,30 -22,0 -31.25,-14.5 -40.5,-30 z m 41,16 c 8.75,0 16,-7.25 16,-16 0,-8.75 -7.25,-16 -16,-16 -8.75,0 -16,7.25 -16,16 0,8.75 7.25,16 16,16 z"
        inkstitch:angle="135"
        inkstitch:expand_mm="0.2"
@@ -1554,7 +1568,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 70.601367,250 h -45 l 5.75,-88.25 -65.5,-96.75 v -2.5 h 49.25 l 37,82 33.75,-82 H 132.85137 V 65 l -67.250003,95.5 z"
        id="path1200"
        inkstitch:angle="90"
@@ -1569,7 +1583,7 @@ Sandrine Nugue
   <g
      inkscape:groupmode="layer"
      inkscape:label="GlyphLayer-Z"
-     style="display:none"
+     style="display:inline"
      id="g1206">
     <path
        style="stroke-width:0.25"
@@ -1577,7 +1591,7 @@ Sandrine Nugue
        id="path20072"
        inkstitch:ties="1" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -53.648633,207 h -15.5 l 4.25,-11.75 50,-11.25 -16.25,23 z"
        id="path20070"
        sodipodi:nodetypes="cccccc"
@@ -1588,7 +1602,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 33.101367,173.25 -15.75,33.75 h -30.75 L 3.8513667,179.75 Z"
        id="path20068"
        inkstitch:angle="45"
@@ -1598,7 +1612,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 35.101367,207 17.5,-38.25 21.75,-4.5 h 2.5 l -7.5,42.75 h -11.5 z"
        id="path20064"
        sodipodi:nodetypes="ccccccc"
@@ -1609,7 +1623,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -9.3986333,171.5 -45.9999997,9.75 18,-27.75 48,-12.75 z"
        id="path20062"
        inkstitch:angle="45"
@@ -1619,7 +1633,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 20.351367,127 -47.25,12 15.75,-24.5 45.25,-8.75 z"
        id="path20060"
        inkstitch:angle="45"
@@ -1629,7 +1643,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="M 43.351367,92.75 -1.8986333,101 18.351367,70 l 46,-9.75 z"
        id="path20058"
        inkstitch:angle="45"
@@ -1639,7 +1653,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 16.851367,32.75 -12.7500003,29 -30.2499997,6.5 14.75,-35.5 z"
        id="path20056"
        inkstitch:angle="45"
@@ -1649,7 +1663,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m 72.851367,47 -52.25,11.25 11.75,-25.5 h 49.75 z"
        id="path20054"
        inkstitch:angle="45"
@@ -1659,7 +1673,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#000000;stroke-width:0.25"
+       style="display:inline;fill:#000000;stroke-width:0.25"
        d="m -27.148633,32.75 -15.75,39.25 -17.25,3.75 h -2.5 l 5,-43 z"
        id="path20052"
        inkstitch:angle="45"
@@ -1669,7 +1683,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;fill-rule:evenodd;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;fill-rule:evenodd;stroke-width:0.25"
        d="m 25.851367,22.25 2.919922,-0.265137 2.720703,-0.777832 2.462891,-1.26416 2.146484,-1.724121 1.771484,-2.157715 1.337891,-2.564941 0.488037,-1.426941 0.357666,-1.51886 L 40.276416,8.9428101 40.351367,7.25 40.276416,5.5599976 40.056445,3.9604492 39.698779,2.4539185 39.210742,1.0429687 38.599658,-0.26983643 37.872851,-1.4819336 36.101367,-3.59375 33.954883,-5.2719727 31.491992,-6.4960937 28.771289,-7.2456055 25.851367,-7.5 l -3.095703,0.2543945 -2.873047,0.7495118 -2.591797,1.224121 -2.251953,1.6782227 -0.980225,1.0029907 -0.873291,1.1088257 -0.759033,1.21209717 -0.637451,1.31280513 -0.508545,1.4109498 -0.372314,1.5065307 -0.22876,1.5995484 -0.07788,1.6900024 0.07788,1.6928101 0.22876,1.6074829 0.372314,1.51886 0.508545,1.426941 0.637451,1.331726 0.759033,1.233215 0.873291,1.131409 0.980225,1.026306 2.251953,1.724121 2.591797,1.26416 2.873047,0.777832 z"
        id="path20050"
        inkstitch:angle="135"
@@ -1679,7 +1693,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#ff0000;stroke-width:0.25"
+       style="display:inline;fill:#ff0000;stroke-width:0.25"
        d="m 65.601367,22.25 c -8.5,0 -15.25,-5.75 -15.25,-15 0,-9.25 6.75,-14.75 15.25,-14.75 8,0 14.5,5.5 14.5,14.75 0,9.25 -6.5,15 -14.5,15 z"
        id="path1204"
        inkstitch:angle="135"
@@ -1689,7 +1703,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#b3b3b3;stroke-width:0.25"
+       style="display:inline;fill:#b3b3b3;stroke-width:0.25"
        d="m -30.898633,207 v 43 h -32.75 v -2.5 l 10,-25.5 v -15 z"
        id="path20074"
        sodipodi:nodetypes="ccccccc"
@@ -1700,7 +1714,7 @@ Sandrine Nugue
        inkstitch:min_stitch_length_mm="0.3"
        inkstitch:min_jump_stitch_length_mm="3" />
     <path
-       style="fill:#b3b3b3;stroke-width:0.25"
+       style="display:inline;fill:#b3b3b3;stroke-width:0.25"
        d="m 57.851367,207 v 43 h -32.75 v -2.5 l 10,-25.5 v -15 z"
        id="path20066"
        sodipodi:nodetypes="ccccccc"

fonts/magnolia_small/LICENSE

@@ -0,0 +1,99 @@
+This font has been adapted for Ink/Stitch by Corinne Renaud
+
+ORIGINAL FONT DOWNLOAD: https://www.dafont.com/magnolia-script.font
+LICENSE: licensed under SIL Open Font License, Version 1.1.
+============================================
+Magnolia Script
+============================================
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded, 
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.

fonts/pacificlo/font.json

@@ -18,14 +18,17 @@
     "horiz_adv_x": {
         "$": 33,
         "A": 58,
-	"Ä": 58,
+	    "Ä": 58,
         "Å": 58,
         "Æ": 76,
         "B": 62,
         "C": 51,
         "D": 62,
-        "E": 51,
-        "È": 51,
+        "E": 53,
+        "È": 53,
+        "Ê": 53,
+        "É": 53,
+        "Ë": 53,
         "F": 53,
         "G": 60,
         "H": 65,

fonts/pacificlo_tiny/font.json

@@ -25,8 +25,11 @@
         "B": 62,
         "C": 51,
         "D": 62,
-        "E": 51,
-        "È": 51,
+        "E": 53,
+        "È": 53,
+        "Ê": 53,
+        "É": 53,
+        "Ë": 53,
         "F": 53,
         "G": 60,
         "H": 65,

lib/api/__init__.py

@@ -1,6 +0,0 @@
-# Authors: see git history
-#
-# Copyright (c) 2010 Authors
-# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
-
-from .server import APIServer

lib/api/lang.py

@@ -1,11 +0,0 @@
-import os
-
-from flask import Blueprint, jsonify
-
-languages = Blueprint('languages', __name__)
-
-
-@languages.route('')
-def get_lang():
-    languages = dict(os.environ)
-    return jsonify(languages)

lib/api/page_specs.py

@@ -1,36 +0,0 @@
-# Authors: see git history
-#
-# Copyright (c) 2010 Authors
-# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
-
-from flask import Blueprint, g, jsonify
-
-page_specs = Blueprint('page_specs', __name__)
-
-
-@page_specs.route('')
-def get_page_specs():
-    svg = g.extension.document.getroot()
-    width = svg.get('width', 0)
-    height = svg.get('height', 0)
-    pagecolor = "white"
-    deskcolor = "white"
-    bordercolor = "black"
-    showpageshadow = True
-
-    namedview = svg.namedview
-    if namedview is not None:
-        pagecolor = namedview.get('pagecolor', pagecolor)
-        deskcolor = namedview.get('inkscape:deskcolor', deskcolor)
-        bordercolor = namedview.get('bordercolor', bordercolor)
-        showpageshadow = namedview.get('inkscape:showpageshadow', showpageshadow)
-
-    page_specs = {
-        "width": width,
-        "height": height,
-        "pagecolor": pagecolor,
-        "deskcolor": deskcolor,
-        "bordercolor": bordercolor,
-        "showpageshadow": showpageshadow
-    }
-    return jsonify(page_specs)

lib/api/server.py

@@ -1,121 +0,0 @@
-# Authors: see git history
-#
-# Copyright (c) 2010 Authors
-# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
-
-import errno
-import logging
-import socket
-import sys
-import time
-from threading import Thread
-from contextlib import closing
-
-import requests
-from flask import Flask, g
-from werkzeug.serving import make_server
-
-from ..utils.json import InkStitchJSONProvider
-from .simulator import simulator
-from .stitch_plan import stitch_plan
-from .page_specs import page_specs
-from .lang import languages
-# this for electron axios
-from flask_cors import CORS
-
-
-class APIServer(Thread):
-    def __init__(self, *args, **kwargs):
-        self.extension = args[0]
-        Thread.__init__(self, *args[1:], **kwargs)
-        self.daemon = True
-        self.app = None
-        self.host = None
-        self.port = None
-        self.ready = False
-
-        self.__setup_app()
-        self.flask_server = None
-        self.server_thread = None
-
-    def __setup_app(self):  # noqa: C901
-        # Disable warning about using a development server in a production environment
-        cli = sys.modules['flask.cli']
-        cli.show_server_banner = lambda *x: None
-
-        self.app = Flask(__name__)
-        CORS(self.app)
-        self.app.json = InkStitchJSONProvider(self.app)
-
-        self.app.register_blueprint(simulator, url_prefix="/simulator")
-        self.app.register_blueprint(stitch_plan, url_prefix="/stitch_plan")
-        self.app.register_blueprint(page_specs, url_prefix="/page_specs")
-        self.app.register_blueprint(languages, url_prefix="/languages")
-
-        @self.app.before_request
-        def store_extension():
-            # make the InkstitchExtension object available to the view handling
-            # this request
-            g.extension = self.extension
-
-        @self.app.route('/ping')
-        def ping():
-            return "pong"
-
-    def stop(self):
-        self.flask_server.shutdown()
-        self.server_thread.join()
-
-    def disable_logging(self):
-        logging.getLogger('werkzeug').setLevel(logging.ERROR)
-
-    # https://github.com/aluo-x/Learning_Neural_Acoustic_Fields/blob/master/train.py
-    # https://github.com/pytorch/pytorch/issues/71029
-    def find_free_port(self):
-        with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as s:
-            s.bind(('localhost', 0))
-            return s.getsockname()[1]
-
-    def run(self):
-        self.disable_logging()
-
-        self.host = "127.0.0.1"
-        self.port = self.find_free_port()
-        self.flask_server = make_server(self.host, self.port, self.app)
-        self.server_thread = Thread(target=self.flask_server.serve_forever)
-        self.server_thread.start()
-
-    def ready_checker(self):
-        """Wait until the server is started.
-
-        Annoyingly, there's no way to get a callback to be run when the Flask
-        server starts.  Instead, we'll have to poll.
-        """
-
-        while True:
-            if self.port:
-                try:
-                    response = requests.get("http://%s:%s/ping" % (self.host, self.port))
-                    if response.status_code == 200:
-                        break
-                except socket.error as e:
-                    if e.errno == errno.ECONNREFUSED:
-                        pass
-                    else:
-                        raise
-
-            time.sleep(0.1)
-
-    def start_server(self):
-        """Start the API server.
-
-        returns: port (int) -- the port that the server is listening on
-                   (on localhost)
-        """
-
-        checker = Thread(target=self.ready_checker)
-        checker.start()
-        self.start()
-        checker.join()
-
-        return self.port

lib/api/simulator.py

@@ -1,8 +0,0 @@
-# Authors: see git history
-#
-# Copyright (c) 2010 Authors
-# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
-
-from flask import Blueprint
-
-simulator = Blueprint('simulator', __name__)

lib/api/stitch_plan.py

@@ -1,29 +0,0 @@
-# Authors: see git history
-#
-# Copyright (c) 2010 Authors
-# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
-
-from flask import Blueprint, g, jsonify
-
-from ..exceptions import InkstitchException, format_uncaught_exception
-from ..stitch_plan import stitch_groups_to_stitch_plan
-
-stitch_plan = Blueprint('stitch_plan', __name__)
-
-
-@stitch_plan.route('')
-def get_stitch_plan():
-    if not g.extension.get_elements():
-        return dict(colors=[], stitch_blocks=[], commands=[])
-
-    try:
-        metadata = g.extension.get_inkstitch_metadata()
-        collapse_len = metadata['collapse_len_mm']
-        min_stitch_len = metadata['min_stitch_len_mm']
-        stitch_groups = g.extension.elements_to_stitch_groups(g.extension.elements)
-        stitch_plan = stitch_groups_to_stitch_plan(stitch_groups, collapse_len=collapse_len, min_stitch_len=min_stitch_len)
-        return jsonify(stitch_plan)
-    except InkstitchException as exc:
-        return jsonify({"error_message": str(exc)}), 500
-    except Exception:
-        return jsonify({"error_message": format_uncaught_exception()}), 500

lib/extensions/lettering.py

@@ -14,6 +14,7 @@ from ..gui.simulator import SplitSimulatorWindow
 from ..i18n import _
 from ..svg import get_correction_transform
 from ..svg.tags import INKSCAPE_LABEL, INKSTITCH_LETTERING, SVG_GROUP_TAG
+from ..utils.svg_data import get_pagecolor
 from .commands import CommandsExtension
 
 
@@ -59,6 +60,7 @@ class Lettering(CommandsExtension):
 
     def effect(self):
         metadata = self.get_inkstitch_metadata()
+        background_color = get_pagecolor(self.svg.namedview)
         app = wx.App()
         frame = SplitSimulatorWindow(
             title=_("Ink/Stitch Lettering"),
@@ -66,6 +68,7 @@ class Lettering(CommandsExtension):
             group=self.get_or_create_group(),
             on_cancel=self.cancel,
             metadata=metadata,
+            background_color=background_color,
             target_duration=1
         )
 

lib/extensions/params.py

@@ -15,7 +15,6 @@ from secrets import randbelow
 import wx
 from wx.lib.scrolledpanel import ScrolledPanel
 
-from .base import InkstitchExtension
 from ..commands import is_command, is_command_symbol
 from ..elements import (Clone, EmbroideryElement, FillStitch, Polyline,
                         SatinColumn, Stroke)
@@ -28,7 +27,9 @@ from ..stitch_plan import stitch_groups_to_stitch_plan
 from ..svg.tags import SVG_POLYLINE_TAG
 from ..utils import get_resource_dir
 from ..utils.param import ParamOption
+from ..utils.svg_data import get_pagecolor
 from ..utils.threading import ExitThread, check_stop_flag
+from .base import InkstitchExtension
 
 
 def grouper(iterable_obj, count, fillvalue=None):
@@ -473,10 +474,11 @@ class ParamsTab(ScrolledPanel):
 
 
 class SettingsPanel(wx.Panel):
-    def __init__(self, parent, tabs_factory=None, on_cancel=None, metadata=None, simulator=None):
+    def __init__(self, parent, tabs_factory=None, on_cancel=None, metadata=None, background_color='white', simulator=None):
         self.tabs_factory = tabs_factory
         self.cancel_hook = on_cancel
         self.metadata = metadata
+        self.background_color = background_color
         self.simulator = simulator
         self.parent = parent
 
@@ -782,12 +784,14 @@ class Params(InkstitchExtension):
         try:
             app = wx.App()
             metadata = self.get_inkstitch_metadata()
+            background_color = get_pagecolor(self.svg.namedview)
             frame = SplitSimulatorWindow(
                 title=_("Embroidery Params"),
                 panel_class=SettingsPanel,
                 tabs_factory=self.create_tabs,
                 on_cancel=self.cancel,
                 metadata=metadata,
+                background_color=background_color,
                 target_duration=5
             )
 

lib/extensions/simulator.py

@@ -3,9 +3,11 @@
 # Copyright (c) 2010 Authors
 # Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
 
-from ..api import APIServer
-from ..gui import open_url
+import wx
 
+from ..gui.simulator import SimulatorWindow
+from ..stitch_plan import stitch_groups_to_stitch_plan
+from ..utils.svg_data import get_pagecolor
 from .base import InkstitchExtension
 
 
@@ -16,9 +18,23 @@ class Simulator(InkstitchExtension):
     def effect(self):
         if not self.get_elements():
             return
-        api_server = APIServer(self)
-        port = api_server.start_server()
-        electron = open_url("/simulator", port)
-        electron.wait()
-        api_server.stop()
-        api_server.join()
+
+        metadata = self.get_inkstitch_metadata()
+        collapse_len = metadata['collapse_len_mm']
+        min_stitch_len = metadata['min_stitch_len_mm']
+        stitch_groups = self.elements_to_stitch_groups(self.elements)
+        stitch_plan = stitch_groups_to_stitch_plan(stitch_groups, collapse_len=collapse_len, min_stitch_len=min_stitch_len)
+        background_color = get_pagecolor(self.svg.namedview)
+
+        app = wx.App()
+        current_screen = wx.Display.GetFromPoint(wx.GetMousePosition())
+        display = wx.Display(current_screen)
+        screen_rect = display.GetClientArea()
+        height = int(screen_rect[3] * 0.8)
+        simulator = SimulatorWindow(size=(0, height), background_color=background_color)
+        wx.CallLater(100, simulator.Centre)
+        app.SetTopWindow(simulator)
+        simulator.Show()
+        simulator.load(stitch_plan)
+        simulator.go()
+        app.MainLoop()

lib/extensions/tartan.py

@@ -13,6 +13,7 @@ from ..gui.simulator import SplitSimulatorWindow
 from ..gui.tartan import TartanMainPanel
 from ..i18n import _
 from ..svg.tags import EMBROIDERABLE_TAGS, INKSTITCH_TARTAN, SVG_GROUP_TAG
+from ..utils.svg_data import get_pagecolor
 from .base import InkstitchExtension
 
 
@@ -58,6 +59,7 @@ class Tartan(InkstitchExtension):
             errormsg(_("To create a tartan pattern please select at least one element with a fill color."))
             return
         metadata = self.get_inkstitch_metadata()
+        background_color = get_pagecolor(self.svg.namedview)
 
         app = wx.App()
         frame = SplitSimulatorWindow(
@@ -66,6 +68,7 @@ class Tartan(InkstitchExtension):
             elements=list(self.elements),
             on_cancel=self.cancel,
             metadata=metadata,
+            background_color=background_color,
             target_duration=1
         )
 

lib/gui/__init__.py

@@ -6,5 +6,5 @@
 from .dialogs import confirm_dialog, info_dialog
 from .electron import open_url
 from .presets import PresetsPanel
-from .simulator import PreviewRenderer, show_simulator
+from .simulator import PreviewRenderer
 from .warnings import WarningPanel

lib/gui/lettering.py

@@ -28,12 +28,13 @@ from . import PresetsPanel, PreviewRenderer, info_dialog
 class LetteringPanel(wx.Panel):
     DEFAULT_FONT = "small_font"
 
-    def __init__(self, parent, simulator, group, on_cancel=None, metadata=None):
+    def __init__(self, parent, simulator, group, on_cancel=None, metadata=None, background_color='white'):
         self.parent = parent
         self.simulator = simulator
         self.group = group
         self.cancel_hook = on_cancel
         self.metadata = metadata or dict()
+        self.background_color = background_color
 
         super().__init__(parent, wx.ID_ANY)
 

lib/gui/simulator.py

@@ -15,7 +15,6 @@ from lib.utils import get_resource_dir
 from lib.utils.settings import global_settings
 from lib.utils.threading import ExitThread
 from ..i18n import _
-from ..stitch_plan import stitch_plan_from_file
 from ..svg import PIXELS_PER_MM
 
 # L10N command label at bottom of simulator window
@@ -43,8 +42,8 @@ class ControlPanel(wx.Panel):
         wx.Panel.__init__(self, parent, *args, **kwargs)
 
         self.drawing_panel = None
-        self.num_stitches = 1
-        self.current_stitch = 1
+        self.num_stitches = 0
+        self.current_stitch = 0
         self.speed = 1
         self.direction = 1
         self._last_color_block_end = 0
@@ -98,12 +97,15 @@ class ControlPanel(wx.Panel):
         self.slider.Bind(wx.EVT_SLIDER, self.on_slider)
         self.stitchBox = IntCtrl(self, -1, value=1, min=1, max=2, limited=True, allow_none=True,
                                  size=((100, -1)), style=wx.TE_PROCESS_ENTER)
+        self.stitchBox.Clear()
         self.stitchBox.Bind(wx.EVT_LEFT_DOWN, self.on_stitch_box_focus)
         self.stitchBox.Bind(wx.EVT_SET_FOCUS, self.on_stitch_box_focus)
         self.stitchBox.Bind(wx.EVT_TEXT_ENTER, self.on_stitch_box_focusout)
         self.stitchBox.Bind(wx.EVT_KILL_FOCUS, self.on_stitch_box_focusout)
         self.Bind(wx.EVT_LEFT_DOWN, self.on_stitch_box_focusout)
-        self.totalstitchText = wx.StaticText(self, -1, label="/ ________")
+        self.totalstitchText = wx.StaticText(self, -1, label="")
+        extent = self.totalstitchText.GetTextExtent("0000000")
+        self.totalstitchText.SetMinSize(extent)
         self.btnJump = wx.BitmapToggleButton(self, -1, style=self.button_style)
         self.btnJump.SetToolTip(_('Show jump stitches'))
         self.btnJump.SetBitmap(self.load_icon('jump'))
@@ -120,6 +122,9 @@ class ControlPanel(wx.Panel):
         self.btnColorChange.SetToolTip(_('Show color changes'))
         self.btnColorChange.SetBitmap(self.load_icon('color_change'))
         self.btnColorChange.Bind(wx.EVT_TOGGLEBUTTON, lambda event: self.on_marker_button('color_change', event))
+        self.btnBackgroundColor = wx.ColourPickerCtrl(self, -1, colour='white', size=self.btnJump.GetSize())
+        self.btnBackgroundColor.SetToolTip(_("Change background color"))
+        self.btnBackgroundColor.Bind(wx.EVT_COLOURPICKER_CHANGED, self.on_update_background_color)
         if self.detach_callback:
             self.btnDetachSimulator = wx.BitmapButton(self, -1, style=self.button_style)
             self.btnDetachSimulator.SetToolTip(_('Detach/attach simulator window'))
@@ -129,8 +134,10 @@ class ControlPanel(wx.Panel):
         # Layout
         self.hbSizer1 = wx.BoxSizer(wx.HORIZONTAL)
         self.hbSizer1.Add(self.slider, 1, wx.EXPAND | wx.RIGHT, 10)
-        self.hbSizer1.Add(self.stitchBox, 0, wx.ALIGN_CENTER | wx.Right, 10)
-        self.hbSizer1.Add(self.totalstitchText, 0, wx.ALIGN_CENTER | wx.LEFT, 10)
+        self.hbSizer1.Add(self.stitchBox, 0, wx.ALIGN_TOP | wx.TOP, 25)
+        self.hbSizer1.Add((1, 1), 0, wx.RIGHT, 10)
+        self.hbSizer1.Add(self.totalstitchText, 0, wx.ALIGN_TOP | wx.TOP, 25)
+        self.hbSizer1.Add((1, 1), 0, wx.RIGHT, 10)
 
         self.controls_sizer = wx.StaticBoxSizer(wx.StaticBox(self, wx.ID_ANY, _("Controls")), wx.HORIZONTAL)
         self.controls_inner_sizer = wx.BoxSizer(wx.HORIZONTAL)
@@ -147,11 +154,12 @@ class ControlPanel(wx.Panel):
 
         self.show_sizer = wx.StaticBoxSizer(wx.StaticBox(self, wx.ID_ANY, _("Show")), wx.HORIZONTAL)
         self.show_inner_sizer = wx.BoxSizer(wx.HORIZONTAL)
-        self.show_inner_sizer.Add(self.btnNpp, 0, wx.EXPAND | wx.ALL, 2)
+        self.show_inner_sizer.Add(self.btnNpp, 0, wx.ALL, 2)
         self.show_inner_sizer.Add(self.btnJump, 0, wx.ALL, 2)
         self.show_inner_sizer.Add(self.btnTrim, 0, wx.ALL, 2)
         self.show_inner_sizer.Add(self.btnStop, 0, wx.ALL, 2)
         self.show_inner_sizer.Add(self.btnColorChange, 0, wx.ALL, 2)
+        self.show_inner_sizer.Add(self.btnBackgroundColor, 0, wx.EXPAND | wx.ALL, 2)
         if self.detach_callback:
             self.show_inner_sizer.Add(self.btnDetachSimulator, 0, wx.ALL, 2)
         self.show_sizer.Add((1, 1), 1)
@@ -226,7 +234,6 @@ class ControlPanel(wx.Panel):
 
         self.accel_table = wx.AcceleratorTable(self.accel_entries)
         self.SetAcceleratorTable(self.accel_table)
-        self.SetFocus()
 
         # wait for layouts so that panel size is set
         if self.stitch_plan:
@@ -241,27 +248,32 @@ class ControlPanel(wx.Panel):
             # otherwise the slider and intctrl get mad
             num_stitches = 2
         self.num_stitches = num_stitches
+        self.stitchBox.SetValue(1)
         self.stitchBox.SetMax(num_stitches)
         self.slider.SetMax(num_stitches)
         self.totalstitchText.SetLabel(f"/ { num_stitches }")
         self.choose_speed()
 
-    def add_color(self, color, num_stitches):
-        start = self._last_color_block_end + 1
-        self.slider.add_color_section(ColorSection(color.rgb, start, start + num_stitches - 1))
-        self._last_color_block_end = self._last_color_block_end + num_stitches
+    def clear(self):
+        self.stitches = []
+        self._set_num_stitches(0)
+        self.slider.clear()
+        self.stitchBox.Clear()
+        self.totalstitchText.SetLabel("")
 
     def load(self, stitch_plan):
         self.stitches = []
         self._set_num_stitches(stitch_plan.num_stitches)
 
         stitch_num = 0
+        last_block_end = 1
         for color_block in stitch_plan.color_blocks:
             self.stitches.extend(color_block.stitches)
 
             start = stitch_num + 1
-            end = start + color_block.num_stitches
-            self.slider.add_color_section(color_block.color.rgb, start, end)
+            end = start + color_block.num_stitches - 1
+            self.slider.add_color_section(color_block.color.rgb, last_block_end, end)
+            last_block_end = end
 
             for stitch_num, stitch in enumerate(color_block.stitches, start):
                 if stitch.trim:
@@ -281,6 +293,13 @@ class ControlPanel(wx.Panel):
     def on_marker_button(self, marker_type, event):
         self.slider.enable_marker_list(marker_type, event.GetEventObject().GetValue())
 
+    def on_update_background_color(self, event):
+        self.set_background_color(event.Colour)
+
+    def set_background_color(self, color):
+        self.btnBackgroundColor.SetColour(color)
+        self.drawing_panel.SetBackgroundColour(color)
+
     def choose_speed(self):
         if self.target_duration:
             self.set_speed(int(self.num_stitches / float(self.target_duration)))
@@ -805,11 +824,12 @@ class DrawingPanel(wx.Panel):
 
 
 class MarkerList(list):
-    def __init__(self, icon_name, stitch_numbers=()):
+    def __init__(self, icon_name, offset=0, stitch_numbers=()):
         super().__init__(self)
         icons_dir = get_resource_dir("icons")
         self.icon_name = icon_name
         self.icon = wx.Image(os.path.join(icons_dir, f"{icon_name}.png")).ConvertToBitmap()
+        self.offset = offset
         self.enabled = False
         self.extend(stitch_numbers)
 
@@ -828,32 +848,32 @@ class ColorSection:
 class SimulatorSlider(wx.Panel):
     PROXY_EVENTS = (wx.EVT_SLIDER,)
 
-    def __init__(self, parent, id=wx.ID_ANY, minValue=0, maxValue=1, **kwargs):
+    def __init__(self, parent, id=wx.ID_ANY, minValue=1, maxValue=2, **kwargs):
         super().__init__(parent, id)
 
         kwargs['style'] = wx.SL_HORIZONTAL | wx.SL_VALUE_LABEL | wx.SL_TOP | wx.ALIGN_TOP
 
-        self._height = self.GetTextExtent("M").y * 4
+        self._height = self.GetTextExtent("M").y * 6
         self.SetMinSize((self._height, self._height))
 
         self.marker_lists = {
             "trim": MarkerList("trim"),
-            "stop": MarkerList("stop"),
-            "jump": MarkerList("jump"),
-            "color_change": MarkerList("color_change"),
+            "jump": MarkerList("jump", 0.17),
+            "stop": MarkerList("stop", 0.34),
+            "color_change": MarkerList("color_change", 0.34),
         }
         self.marker_pen = wx.Pen(wx.Colour(0, 0, 0))
         self.color_sections = []
         self.margin = 15
         self.tab_start = 0
-        self.tab_width = 0.2
-        self.tab_height = 0.2
-        self.color_bar_start = 0.3
-        self.color_bar_thickness = 0.25
+        self.tab_width = 0.15
+        self.tab_height = 0.15
+        self.color_bar_start = 0.22
+        self.color_bar_thickness = 0.17
         self.marker_start = self.color_bar_start
-        self.marker_end = 0.75
-        self.marker_icon_start = 0.75
-        self.marker_icon_size = self._height // 4
+        self.marker_end = 0.5
+        self.marker_icon_start = 0.5
+        self.marker_icon_size = self._height // 6
 
         self._min = minValue
         self._max = maxValue
@@ -884,6 +904,16 @@ class SimulatorSlider(wx.Panel):
     def GetValue(self):
         return self._value
 
+    def clear(self):
+        self.color_sections = []
+        self._min = 1
+        self._max = 2
+        self._value = 0
+        self._tab_rect = None
+
+        for marker_list in self.marker_lists.values():
+            marker_list.clear()
+
     def add_color_section(self, color, start, end):
         self.color_sections.append(ColorSection(color, start, end))
 
@@ -912,6 +942,9 @@ class SimulatorSlider(wx.Panel):
         dc.Clear()
         gc = wx.GraphicsContext.Create(dc)
 
+        if self._value < self._min:
+            return
+
         width, height = self.GetSize()
         min_value = self._min
         max_value = self._max
@@ -952,11 +985,11 @@ class SimulatorSlider(wx.Panel):
                     x = _value_to_x(value)
                     gc.StrokeLine(
                         x, height * self.marker_start,
-                        x, height * self.marker_end
+                        x, height * (self.marker_end + marker_list.offset)
                     )
                     gc.DrawBitmap(
                         marker_list.icon,
-                        x - self.marker_icon_size / 2, height * self.marker_icon_start,
+                        x - self.marker_icon_size / 2, height * (self.marker_icon_start + marker_list.offset),
                         self.marker_icon_size, self.marker_icon_size
                     )
 
@@ -1011,7 +1044,7 @@ class SimulatorSlider(wx.Panel):
 class SimulatorPanel(wx.Panel):
     """"""
 
-    def __init__(self, parent, stitch_plan=None, target_duration=5, stitches_per_second=16, detach_callback=None):
+    def __init__(self, parent, stitch_plan=None, background_color='white', target_duration=5, stitches_per_second=16, detach_callback=None):
         """"""
         super().__init__(parent, style=wx.BORDER_SUNKEN)
 
@@ -1022,6 +1055,7 @@ class SimulatorPanel(wx.Panel):
                                detach_callback=detach_callback)
         self.dp = DrawingPanel(self, stitch_plan=stitch_plan, control_panel=self.cp)
         self.cp.set_drawing_panel(self.dp)
+        self.cp.set_background_color(wx.Colour(background_color))
 
         vbSizer = wx.BoxSizer(wx.VERTICAL)
         vbSizer.Add(self.dp, 1, wx.EXPAND | wx.ALL, 2)
@@ -1040,10 +1074,12 @@ class SimulatorPanel(wx.Panel):
 
     def clear(self):
         self.dp.clear()
+        self.cp.clear()
 
 
 class SimulatorWindow(wx.Frame):
     def __init__(self, panel=None, parent=None, **kwargs):
+        background_color = kwargs.pop('background_color', 'white')
         super().__init__(None, title=_("Embroidery Simulation"), **kwargs)
 
         self.SetWindowStyle(wx.FRAME_FLOAT_ON_PARENT | wx.DEFAULT_FRAME_STYLE)
@@ -1062,8 +1098,8 @@ class SimulatorWindow(wx.Frame):
             self.panel.Show()
         else:
             self.is_child = False
-            self.simulator_panel = SimulatorPanel(self)
-            self.sizer.Add(self.simulator_panel, 1, wx.EXPAND)
+            self.panel = SimulatorPanel(self, background_color=background_color)
+            self.sizer.Add(self.panel, 1, wx.EXPAND)
 
         self.SetSizer(self.sizer)
         self.Layout()
@@ -1072,6 +1108,8 @@ class SimulatorWindow(wx.Frame):
 
         if self.is_child:
             self.Bind(wx.EVT_CLOSE, self.on_close)
+        else:
+            self.Maximize()
 
     def detach_simulator_panel(self):
         self.sizer.Detach(self.panel)
@@ -1079,6 +1117,12 @@ class SimulatorWindow(wx.Frame):
     def on_close(self, event):
         self.parent.attach_simulator()
 
+    def load(self, stitch_plan):
+        self.panel.load(stitch_plan)
+
+    def go(self):
+        self.panel.go()
+
 
 class SplitSimulatorWindow(wx.Frame):
     def __init__(self, panel_class, title, target_duration=None, **kwargs):
@@ -1088,7 +1132,13 @@ class SplitSimulatorWindow(wx.Frame):
 
         self.detached_simulator_frame = None
         self.splitter = wx.SplitterWindow(self, style=wx.SP_LIVE_UPDATE)
-        self.simulator_panel = SimulatorPanel(self.splitter, target_duration=target_duration, detach_callback=self.toggle_detach_simulator)
+        background_color = kwargs.pop('background_color', 'white')
+        self.simulator_panel = SimulatorPanel(
+            self.splitter,
+            background_color=background_color,
+            target_duration=target_duration,
+            detach_callback=self.toggle_detach_simulator
+        )
         self.settings_panel = panel_class(self.splitter, simulator=self.simulator_panel, **kwargs)
 
         self.splitter.SplitVertically(self.settings_panel, self.simulator_panel)
@@ -1105,6 +1155,7 @@ class SplitSimulatorWindow(wx.Frame):
 
         self.SetMinSize(self.sizer.CalcMin())
 
+        self.simulator_panel.SetFocus()
         self.Maximize()
         self.Show()
         wx.CallLater(100, self.set_sash_position)
@@ -1146,7 +1197,7 @@ class SplitSimulatorWindow(wx.Frame):
         self.detached_simulator_frame = None
         self.Maximize()
         self.splitter.UpdateSize()
-        self.SetFocus()
+        self.simulator_panel.SetFocus()
         self.Raise()
         wx.CallLater(100, self.set_sash_position)
         global_settings['pop_out_simulator'] = False
@@ -1228,26 +1279,3 @@ class PreviewRenderer(Thread):
         except:  # noqa: E722
             import traceback
             debug.log("unhandled exception in PreviewRenderer.render_stitch_plan(): " + traceback.format_exc())
-
-
-def show_simulator(stitch_plan):
-    app = wx.App()
-    current_screen = wx.Display.GetFromPoint(wx.GetMousePosition())
-    display = wx.Display(current_screen)
-    screen_rect = display.GetClientArea()
-
-    simulator_pos = (screen_rect[0], screen_rect[1])
-
-    # subtract 1 because otherwise the window becomes maximized on Linux
-    width = screen_rect[2] - 1
-    height = screen_rect[3] - 1
-
-    frame = SimulatorWindow(pos=simulator_pos, size=(width, height), stitch_plan=stitch_plan)
-    app.SetTopWindow(frame)
-    frame.Show()
-    app.MainLoop()
-
-
-if __name__ == "__main__":
-    stitch_plan = stitch_plan_from_file(sys.argv[1])
-    show_simulator(stitch_plan)

lib/gui/tartan/main_panel.py

@@ -26,13 +26,14 @@ from . import CodePanel, CustomizePanel, EmbroideryPanel, HelpPanel
 
 class TartanMainPanel(wx.Panel):
 
-    def __init__(self, parent, simulator, elements, on_cancel=None, metadata=None, output_groups=inkex.Group()):
+    def __init__(self, parent, simulator, elements, on_cancel=None, metadata=None, background_color='white', output_groups=inkex.Group()):
         self.parent = parent
         self.simulator = simulator
         self.elements = elements
         self.cancel_hook = on_cancel
         self.palette = Palette()
         self.metadata = metadata or dict()
+        self.background_color = background_color
         self.output_groups = output_groups
 
         super().__init__(parent, wx.ID_ANY)

lib/utils/svg_data.py

@@ -0,0 +1,10 @@
+# Authors: see git history
+#
+# Copyright (c) 2024 Authors
+# Licensed under the GNU GPL version 3.0 or later.  See the file LICENSE for details.
+
+def get_pagecolor(namedview, default_color='white'):
+    pagecolor = default_color
+    if namedview is not None:
+        pagecolor = namedview.get('pagecolor', pagecolor)
+    return pagecolor

templates/simulator.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <inkscape-extension translationdomain="inkstitch" xmlns="http://www.inkscape.org/namespace/inkscape/extension">
-    <name>Simulator / Realistic Preview</name>
+    <name>Simulator</name>
     <id>org.{{ id_inkstitch }}.simulator</id>
     <param name="extension" type="string" gui-hidden="true">simulator</param>
     <effect implements-custom-gui="true">

translations/messages_af_ZA.po

@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
-"PO-Revision-Date: 2024-04-13 00:56\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
+"PO-Revision-Date: 2024-04-22 01:10\n"
 "Last-Translator: \n"
 "Language-Team: Afrikaans\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -89,7 +89,7 @@ msgstr ""
 
 #. description of font in fonts/amitaclo_small
 #: inkstitch-fonts-metadata.py:24
-msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font)."
+msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font)."
 msgstr ""
 
 #. name of font in fonts/apex_lake
@@ -129,7 +129,7 @@ msgstr ""
 
 #. description of font in fonts/auberge_small
 #: inkstitch-fonts-metadata.py:40
-msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). "
+msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). "
 msgstr ""
 
 #. name of font in fonts/aventurina
@@ -153,446 +153,507 @@ msgstr ""
 msgid "The capital M is 22.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
-#. name of font in fonts/cherryforinkstitch
+#. name of font in fonts/baumans_FI_Small
 #: inkstitch-fonts-metadata.py:50
+msgid "Baumans FI small"
+msgstr ""
+
+#. description of font in fonts/baumans_FI_Small
+#: inkstitch-fonts-metadata.py:52
+msgid "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). "
+msgstr ""
+
+#. name of font in fonts/cherryforinkstitch
+#: inkstitch-fonts-metadata.py:54
 msgid "Cherry for inkstitch"
 msgstr ""
 
 #. description of font in fonts/cherryforinkstitch
-#: inkstitch-fonts-metadata.py:52
+#: inkstitch-fonts-metadata.py:56
 msgid "Cherry for inkstitch is a decorative satin column font of size approximatively 40mm. It can be reduced down to 80% and enlarged up to 180%. It contains 74 glyphs."
 msgstr ""
 
 #. name of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:54
+#: inkstitch-fonts-metadata.py:58
 msgid "Cherry for Kaalleen"
 msgstr ""
 
 #. description of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:56
+#: inkstitch-fonts-metadata.py:60
 msgid "Cherry for Kaalleen is a large decorative font of size approximatively 75mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged up to 130%"
 msgstr ""
 
+#. name of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:62
+msgid "Chicken Little KOR"
+msgstr ""
+
+#. description of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:64
+#, python-format
+msgid "Chicken Little  is a  playful decorative display font with loads of personality. There is no common baseline, no common character size and no common slope of the letters. M is 38 mm high.  The font may be scaled up to 200% and down to 50%. Beyond 110% some satin columns will split."
+msgstr ""
+
+#. name of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:66
+msgid "Chicken Little KOR Small"
+msgstr ""
+
+#. description of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:68
+msgid "This font is an altered version  of Chicken Little KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  Parameters of this font allow to scale down the original Chicken Little KOR font between 25% (for a 10 mm font ) and 45 % (for a 19mm font)."
+msgstr ""
+
 #. name of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:58
+#: inkstitch-fonts-metadata.py:70
 msgid "Chicken Scratch"
 msgstr ""
 
 #. description of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:60
+#: inkstitch-fonts-metadata.py:72
 #, python-format
 msgid "A handwritten font. Can be scaled up to 120% or down to 80%. Caps height is around 19mm or .75 inches."
 msgstr ""
 
 #. name of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:62
+#: inkstitch-fonts-metadata.py:74
 msgid "Chopin Script"
 msgstr ""
 
 #. description of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:64
+#: inkstitch-fonts-metadata.py:76
 #, python-format
 msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:66
+#: inkstitch-fonts-metadata.py:78
 msgid "Coronaviral"
 msgstr ""
 
 #. description of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:68
+#: inkstitch-fonts-metadata.py:80
 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%"
 msgstr ""
 
 #. name of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:70
+#: inkstitch-fonts-metadata.py:82
 msgid "Dejavu Serif"
 msgstr ""
 
 #. description of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:72
+#: inkstitch-fonts-metadata.py:84
 #, python-format
 msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
 msgstr ""
 
 #. name of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:74
+#: inkstitch-fonts-metadata.py:86
 msgid "Digory Doodles Bean"
 msgstr ""
 
 #. description of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:76
+#: inkstitch-fonts-metadata.py:88
 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm."
 msgstr ""
 
 #. name of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:78
+#: inkstitch-fonts-metadata.py:90
 msgid "DinoMouse72"
 msgstr ""
 
 #. description of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:80
+#: inkstitch-fonts-metadata.py:92
 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals"
 msgstr ""
 
 #. name of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:82
+#: inkstitch-fonts-metadata.py:94
 msgid "Emilio 20"
 msgstr ""
 
 #. description of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:84
+#: inkstitch-fonts-metadata.py:96
 #, python-format
 msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:86
+#: inkstitch-fonts-metadata.py:98
 msgid "EMILIO_20_Applique"
 msgstr ""
 
 #. description of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:88
+#: inkstitch-fonts-metadata.py:100
 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique"
 msgstr ""
 
 #. name of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:90
+#: inkstitch-fonts-metadata.py:102
 msgid "EMILIO_20_Bold"
 msgstr ""
 
 #. description of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:92
+#: inkstitch-fonts-metadata.py:104
 msgid "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high."
 msgstr ""
 
 #. name of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:94
+#: inkstitch-fonts-metadata.py:106
 msgid "Emilio 20 Simple"
 msgstr ""
 
 #. description of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:96
+#: inkstitch-fonts-metadata.py:108
 #, python-format
-msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
+msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay"
+msgstr ""
+
+#. name of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:110
+msgid "Emilio 20 Simple Small"
+msgstr ""
+
+#. description of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:112
+msgid "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)."
 msgstr ""
 
 #. name of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:98
+#: inkstitch-fonts-metadata.py:114
 msgid "EMILIO 20 TRICOLORE"
 msgstr ""
 
 #. description of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:100
+#: inkstitch-fonts-metadata.py:116
 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of  size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 90% and enlarged up to 120%"
 msgstr ""
 
 #. name of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:102
+#: inkstitch-fonts-metadata.py:118
 msgid "Espresso KOR"
 msgstr ""
 
 #. description of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:104
+#: inkstitch-fonts-metadata.py:120
 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%"
 msgstr ""
 
 #. name of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:106
+#: inkstitch-fonts-metadata.py:122
 msgid "Espresso tiny"
 msgstr ""
 
 #. description of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:108
+#: inkstitch-fonts-metadata.py:124
 msgid "This font is an altered version  of Espresso KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:110
+#: inkstitch-fonts-metadata.py:126
 msgid "Excalibur KOR"
 msgstr ""
 
 #. description of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:112
+#: inkstitch-fonts-metadata.py:128
 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs."
 msgstr ""
 
+#. name of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:130
+msgid "Excalibur small"
+msgstr ""
+
+#. description of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:132
+msgid "This font is an altered version  of Excalibur KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:114
+#: inkstitch-fonts-metadata.py:134
 msgid "Fold Ink/Stitch"
 msgstr ""
 
 #. description of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:116
+#: inkstitch-fonts-metadata.py:136
 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged as much as you like"
 msgstr ""
 
 #. name of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:118
+#: inkstitch-fonts-metadata.py:138
 msgid "Geneva Simple Sans Rounded"
 msgstr ""
 
 #. description of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:120
+#: inkstitch-fonts-metadata.py:140
 msgid "Suitable for small fonts (8 to 20 mm)"
 msgstr ""
 
 #. name of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:122
+#: inkstitch-fonts-metadata.py:142
 msgid "Geneva Simple Sans"
 msgstr ""
 
 #. description of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:124
+#: inkstitch-fonts-metadata.py:144
 msgid "Suitable for small fonts (6 to 15mm)"
 msgstr ""
 
 #. name of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:126
+#: inkstitch-fonts-metadata.py:146
 msgid "Glacial Tiny 60 AGS"
 msgstr ""
 
 #. description of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:128
-msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%."
+#: inkstitch-fonts-metadata.py:148
+msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%."
 msgstr ""
 
 #. name of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:130
+#: inkstitch-fonts-metadata.py:150
 msgid "InfiniPicto"
 msgstr ""
 
 #. description of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:132
+#: inkstitch-fonts-metadata.py:152
 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French"
 msgstr ""
 
 #. name of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:134
+#: inkstitch-fonts-metadata.py:154
 msgid "Kaushan Script MAM"
 msgstr ""
 
 #. description of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:136
+#: inkstitch-fonts-metadata.py:156
 #, python-format
 msgid "The capital M is 29 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 200%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:138
+#: inkstitch-fonts-metadata.py:158
 msgid "Learning curve"
 msgstr ""
 
 #. description of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:140
+#: inkstitch-fonts-metadata.py:160
 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%"
 msgstr ""
 
 #. name of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:142
+#: inkstitch-fonts-metadata.py:162
 msgid "Lobster AGS"
 msgstr ""
 
 #. description of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:144
+#: inkstitch-fonts-metadata.py:164
 #, python-format
 msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:146
+#: inkstitch-fonts-metadata.py:166
 msgid "Magnolia KOR"
 msgstr ""
 
 #. description of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:148
+#: inkstitch-fonts-metadata.py:168
 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%"
 msgstr ""
 
+#. name of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:170
+msgid "Magnolia small"
+msgstr ""
+
+#. description of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:172
+msgid "This font is an altered version  of Magnolia KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:150
+#: inkstitch-fonts-metadata.py:174
 msgid "Manuskript Gothisch"
 msgstr ""
 
 #. description of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:152
+#: inkstitch-fonts-metadata.py:176
 #, python-format
 msgid "The capital M is 35 millimeter wide at 100% scale.  Can be scaled down to 70% or up to 140%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:154
+#: inkstitch-fonts-metadata.py:178
 msgid "MarcellusSC-FI"
 msgstr ""
 
 #. description of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:156
+#: inkstitch-fonts-metadata.py:180
 #, python-format
 msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split"
 msgstr ""
 
 #. name of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:158
+#: inkstitch-fonts-metadata.py:182
 msgid "Ink/Stitch Medium Font"
 msgstr ""
 
 #. description of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:160
+#: inkstitch-fonts-metadata.py:184
 #, python-format
 msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
 msgstr ""
 
 #. name of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:162
+#: inkstitch-fonts-metadata.py:186
 msgid "Millimarif-bold20"
 msgstr ""
 
 #. description of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:164
+#: inkstitch-fonts-metadata.py:188
 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm."
 msgstr ""
 
 #. name of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:166
+#: inkstitch-fonts-metadata.py:190
 msgid "MONICHA"
 msgstr ""
 
 #. description of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:168
+#: inkstitch-fonts-metadata.py:192
 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. "
 msgstr ""
 
 #. name of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:170
+#: inkstitch-fonts-metadata.py:194
 msgid "Namskout"
 msgstr ""
 
 #. description of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:172
+#: inkstitch-fonts-metadata.py:196
 msgid "Namskout  is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals  A-Z.  It can be reduced down to 50% and enlarged up to 150%  "
 msgstr ""
 
 #. name of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:174
+#: inkstitch-fonts-metadata.py:198
 msgid "NickAinley"
 msgstr ""
 
 #. description of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:176
+#: inkstitch-fonts-metadata.py:200
 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn"
 msgstr ""
 
 #. name of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:178
+#: inkstitch-fonts-metadata.py:202
 msgid "Pacificlo"
 msgstr ""
 
 #. description of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:180
+#: inkstitch-fonts-metadata.py:204
 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. "
 msgstr ""
 
 #. name of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:182
+#: inkstitch-fonts-metadata.py:206
 msgid "Pacificlo tiny"
 msgstr ""
 
 #. description of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:184
+#: inkstitch-fonts-metadata.py:208
 msgid "This font is an altered version  of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:186
+#: inkstitch-fonts-metadata.py:210
 msgid "Roman AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:188
+#: inkstitch-fonts-metadata.py:212
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 130%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:190
+#: inkstitch-fonts-metadata.py:214
 msgid "Roman bicolor AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:192
+#: inkstitch-fonts-metadata.py:216
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:194
+#: inkstitch-fonts-metadata.py:218
 msgid "Sacramarif"
 msgstr ""
 
 #. description of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:196
+#: inkstitch-fonts-metadata.py:220
 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%"
 msgstr ""
 
 #. name of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:198
+#: inkstitch-fonts-metadata.py:222
 msgid "Ink/Stitch Small Font"
 msgstr ""
 
 #. description of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:200
+#: inkstitch-fonts-metadata.py:224
 #, python-format
 msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
 msgstr ""
 
 #. name of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:202
+#: inkstitch-fonts-metadata.py:226
 msgid "Sortefax XL Initials"
 msgstr ""
 
 #. description of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:204
+#: inkstitch-fonts-metadata.py:228
 msgid " Sortefax is a very large satin stitch Capital font of size 150mm.  It can be reduced down to 75% and enlarged up to 200%  It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; )  to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame"
 msgstr ""
 
 #. name of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:206
+#: inkstitch-fonts-metadata.py:230
 msgid "Sortefax Medium Initials"
 msgstr ""
 
 #. description of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:208
+#: inkstitch-fonts-metadata.py:232
 msgid "Sortefax  Medium Initials is a  satin stitch Capital font of size 90 mm.  It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required"
 msgstr ""
 
 #. name of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:210
+#: inkstitch-fonts-metadata.py:234
 msgid "TT Directors"
 msgstr ""
 
 #. description of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:212
+#: inkstitch-fonts-metadata.py:236
 msgid "A font suited for directing"
 msgstr ""
 
 #. name of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:214
+#: inkstitch-fonts-metadata.py:238
 msgid "TT Masters"
 msgstr ""
 
 #. description of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:216
+#: inkstitch-fonts-metadata.py:240
 msgid "A font suited for heavy typing :)"
 msgstr ""
 
 #. name of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:218
+#: inkstitch-fonts-metadata.py:242
 msgid "Violin Serif"
 msgstr ""
 
 #. description of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:220
+#: inkstitch-fonts-metadata.py:244
 #, python-format
 msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches"
 msgstr ""

translations/messages_ar_SA.po

@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
-"PO-Revision-Date: 2024-04-13 00:56\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
+"PO-Revision-Date: 2024-04-22 01:10\n"
 "Last-Translator: \n"
 "Language-Team: Arabic\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -89,7 +89,7 @@ msgstr ""
 
 #. description of font in fonts/amitaclo_small
 #: inkstitch-fonts-metadata.py:24
-msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font)."
+msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font)."
 msgstr ""
 
 #. name of font in fonts/apex_lake
@@ -129,7 +129,7 @@ msgstr ""
 
 #. description of font in fonts/auberge_small
 #: inkstitch-fonts-metadata.py:40
-msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). "
+msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). "
 msgstr ""
 
 #. name of font in fonts/aventurina
@@ -153,446 +153,507 @@ msgstr ""
 msgid "The capital M is 22.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
-#. name of font in fonts/cherryforinkstitch
+#. name of font in fonts/baumans_FI_Small
 #: inkstitch-fonts-metadata.py:50
+msgid "Baumans FI small"
+msgstr ""
+
+#. description of font in fonts/baumans_FI_Small
+#: inkstitch-fonts-metadata.py:52
+msgid "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). "
+msgstr ""
+
+#. name of font in fonts/cherryforinkstitch
+#: inkstitch-fonts-metadata.py:54
 msgid "Cherry for inkstitch"
 msgstr ""
 
 #. description of font in fonts/cherryforinkstitch
-#: inkstitch-fonts-metadata.py:52
+#: inkstitch-fonts-metadata.py:56
 msgid "Cherry for inkstitch is a decorative satin column font of size approximatively 40mm. It can be reduced down to 80% and enlarged up to 180%. It contains 74 glyphs."
 msgstr ""
 
 #. name of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:54
+#: inkstitch-fonts-metadata.py:58
 msgid "Cherry for Kaalleen"
 msgstr ""
 
 #. description of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:56
+#: inkstitch-fonts-metadata.py:60
 msgid "Cherry for Kaalleen is a large decorative font of size approximatively 75mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged up to 130%"
 msgstr ""
 
+#. name of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:62
+msgid "Chicken Little KOR"
+msgstr ""
+
+#. description of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:64
+#, python-format
+msgid "Chicken Little  is a  playful decorative display font with loads of personality. There is no common baseline, no common character size and no common slope of the letters. M is 38 mm high.  The font may be scaled up to 200% and down to 50%. Beyond 110% some satin columns will split."
+msgstr ""
+
+#. name of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:66
+msgid "Chicken Little KOR Small"
+msgstr ""
+
+#. description of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:68
+msgid "This font is an altered version  of Chicken Little KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  Parameters of this font allow to scale down the original Chicken Little KOR font between 25% (for a 10 mm font ) and 45 % (for a 19mm font)."
+msgstr ""
+
 #. name of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:58
+#: inkstitch-fonts-metadata.py:70
 msgid "Chicken Scratch"
 msgstr ""
 
 #. description of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:60
+#: inkstitch-fonts-metadata.py:72
 #, python-format
 msgid "A handwritten font. Can be scaled up to 120% or down to 80%. Caps height is around 19mm or .75 inches."
 msgstr ""
 
 #. name of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:62
+#: inkstitch-fonts-metadata.py:74
 msgid "Chopin Script"
 msgstr ""
 
 #. description of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:64
+#: inkstitch-fonts-metadata.py:76
 #, python-format
 msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:66
+#: inkstitch-fonts-metadata.py:78
 msgid "Coronaviral"
 msgstr ""
 
 #. description of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:68
+#: inkstitch-fonts-metadata.py:80
 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%"
 msgstr ""
 
 #. name of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:70
+#: inkstitch-fonts-metadata.py:82
 msgid "Dejavu Serif"
 msgstr ""
 
 #. description of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:72
+#: inkstitch-fonts-metadata.py:84
 #, python-format
 msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
 msgstr ""
 
 #. name of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:74
+#: inkstitch-fonts-metadata.py:86
 msgid "Digory Doodles Bean"
 msgstr ""
 
 #. description of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:76
+#: inkstitch-fonts-metadata.py:88
 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm."
 msgstr ""
 
 #. name of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:78
+#: inkstitch-fonts-metadata.py:90
 msgid "DinoMouse72"
 msgstr ""
 
 #. description of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:80
+#: inkstitch-fonts-metadata.py:92
 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals"
 msgstr ""
 
 #. name of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:82
+#: inkstitch-fonts-metadata.py:94
 msgid "Emilio 20"
 msgstr ""
 
 #. description of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:84
+#: inkstitch-fonts-metadata.py:96
 #, python-format
 msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:86
+#: inkstitch-fonts-metadata.py:98
 msgid "EMILIO_20_Applique"
 msgstr ""
 
 #. description of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:88
+#: inkstitch-fonts-metadata.py:100
 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique"
 msgstr ""
 
 #. name of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:90
+#: inkstitch-fonts-metadata.py:102
 msgid "EMILIO_20_Bold"
 msgstr ""
 
 #. description of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:92
+#: inkstitch-fonts-metadata.py:104
 msgid "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high."
 msgstr ""
 
 #. name of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:94
+#: inkstitch-fonts-metadata.py:106
 msgid "Emilio 20 Simple"
 msgstr ""
 
 #. description of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:96
+#: inkstitch-fonts-metadata.py:108
 #, python-format
-msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
+msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay"
+msgstr ""
+
+#. name of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:110
+msgid "Emilio 20 Simple Small"
+msgstr ""
+
+#. description of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:112
+msgid "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)."
 msgstr ""
 
 #. name of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:98
+#: inkstitch-fonts-metadata.py:114
 msgid "EMILIO 20 TRICOLORE"
 msgstr ""
 
 #. description of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:100
+#: inkstitch-fonts-metadata.py:116
 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of  size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 90% and enlarged up to 120%"
 msgstr ""
 
 #. name of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:102
+#: inkstitch-fonts-metadata.py:118
 msgid "Espresso KOR"
 msgstr ""
 
 #. description of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:104
+#: inkstitch-fonts-metadata.py:120
 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%"
 msgstr ""
 
 #. name of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:106
+#: inkstitch-fonts-metadata.py:122
 msgid "Espresso tiny"
 msgstr ""
 
 #. description of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:108
+#: inkstitch-fonts-metadata.py:124
 msgid "This font is an altered version  of Espresso KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:110
+#: inkstitch-fonts-metadata.py:126
 msgid "Excalibur KOR"
 msgstr ""
 
 #. description of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:112
+#: inkstitch-fonts-metadata.py:128
 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs."
 msgstr ""
 
+#. name of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:130
+msgid "Excalibur small"
+msgstr ""
+
+#. description of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:132
+msgid "This font is an altered version  of Excalibur KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:114
+#: inkstitch-fonts-metadata.py:134
 msgid "Fold Ink/Stitch"
 msgstr ""
 
 #. description of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:116
+#: inkstitch-fonts-metadata.py:136
 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged as much as you like"
 msgstr ""
 
 #. name of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:118
+#: inkstitch-fonts-metadata.py:138
 msgid "Geneva Simple Sans Rounded"
 msgstr ""
 
 #. description of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:120
+#: inkstitch-fonts-metadata.py:140
 msgid "Suitable for small fonts (8 to 20 mm)"
 msgstr ""
 
 #. name of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:122
+#: inkstitch-fonts-metadata.py:142
 msgid "Geneva Simple Sans"
 msgstr ""
 
 #. description of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:124
+#: inkstitch-fonts-metadata.py:144
 msgid "Suitable for small fonts (6 to 15mm)"
 msgstr ""
 
 #. name of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:126
+#: inkstitch-fonts-metadata.py:146
 msgid "Glacial Tiny 60 AGS"
 msgstr ""
 
 #. description of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:128
-msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%."
+#: inkstitch-fonts-metadata.py:148
+msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%."
 msgstr ""
 
 #. name of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:130
+#: inkstitch-fonts-metadata.py:150
 msgid "InfiniPicto"
 msgstr ""
 
 #. description of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:132
+#: inkstitch-fonts-metadata.py:152
 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French"
 msgstr ""
 
 #. name of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:134
+#: inkstitch-fonts-metadata.py:154
 msgid "Kaushan Script MAM"
 msgstr ""
 
 #. description of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:136
+#: inkstitch-fonts-metadata.py:156
 #, python-format
 msgid "The capital M is 29 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 200%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:138
+#: inkstitch-fonts-metadata.py:158
 msgid "Learning curve"
 msgstr ""
 
 #. description of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:140
+#: inkstitch-fonts-metadata.py:160
 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%"
 msgstr ""
 
 #. name of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:142
+#: inkstitch-fonts-metadata.py:162
 msgid "Lobster AGS"
 msgstr ""
 
 #. description of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:144
+#: inkstitch-fonts-metadata.py:164
 #, python-format
 msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:146
+#: inkstitch-fonts-metadata.py:166
 msgid "Magnolia KOR"
 msgstr ""
 
 #. description of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:148
+#: inkstitch-fonts-metadata.py:168
 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%"
 msgstr ""
 
+#. name of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:170
+msgid "Magnolia small"
+msgstr ""
+
+#. description of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:172
+msgid "This font is an altered version  of Magnolia KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:150
+#: inkstitch-fonts-metadata.py:174
 msgid "Manuskript Gothisch"
 msgstr ""
 
 #. description of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:152
+#: inkstitch-fonts-metadata.py:176
 #, python-format
 msgid "The capital M is 35 millimeter wide at 100% scale.  Can be scaled down to 70% or up to 140%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:154
+#: inkstitch-fonts-metadata.py:178
 msgid "MarcellusSC-FI"
 msgstr ""
 
 #. description of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:156
+#: inkstitch-fonts-metadata.py:180
 #, python-format
 msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split"
 msgstr ""
 
 #. name of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:158
+#: inkstitch-fonts-metadata.py:182
 msgid "Ink/Stitch Medium Font"
 msgstr ""
 
 #. description of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:160
+#: inkstitch-fonts-metadata.py:184
 #, python-format
 msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
 msgstr ""
 
 #. name of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:162
+#: inkstitch-fonts-metadata.py:186
 msgid "Millimarif-bold20"
 msgstr ""
 
 #. description of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:164
+#: inkstitch-fonts-metadata.py:188
 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm."
 msgstr ""
 
 #. name of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:166
+#: inkstitch-fonts-metadata.py:190
 msgid "MONICHA"
 msgstr ""
 
 #. description of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:168
+#: inkstitch-fonts-metadata.py:192
 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. "
 msgstr ""
 
 #. name of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:170
+#: inkstitch-fonts-metadata.py:194
 msgid "Namskout"
 msgstr ""
 
 #. description of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:172
+#: inkstitch-fonts-metadata.py:196
 msgid "Namskout  is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals  A-Z.  It can be reduced down to 50% and enlarged up to 150%  "
 msgstr ""
 
 #. name of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:174
+#: inkstitch-fonts-metadata.py:198
 msgid "NickAinley"
 msgstr ""
 
 #. description of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:176
+#: inkstitch-fonts-metadata.py:200
 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn"
 msgstr ""
 
 #. name of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:178
+#: inkstitch-fonts-metadata.py:202
 msgid "Pacificlo"
 msgstr ""
 
 #. description of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:180
+#: inkstitch-fonts-metadata.py:204
 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. "
 msgstr ""
 
 #. name of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:182
+#: inkstitch-fonts-metadata.py:206
 msgid "Pacificlo tiny"
 msgstr ""
 
 #. description of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:184
+#: inkstitch-fonts-metadata.py:208
 msgid "This font is an altered version  of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:186
+#: inkstitch-fonts-metadata.py:210
 msgid "Roman AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:188
+#: inkstitch-fonts-metadata.py:212
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 130%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:190
+#: inkstitch-fonts-metadata.py:214
 msgid "Roman bicolor AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:192
+#: inkstitch-fonts-metadata.py:216
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:194
+#: inkstitch-fonts-metadata.py:218
 msgid "Sacramarif"
 msgstr ""
 
 #. description of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:196
+#: inkstitch-fonts-metadata.py:220
 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%"
 msgstr ""
 
 #. name of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:198
+#: inkstitch-fonts-metadata.py:222
 msgid "Ink/Stitch Small Font"
 msgstr ""
 
 #. description of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:200
+#: inkstitch-fonts-metadata.py:224
 #, python-format
 msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
 msgstr ""
 
 #. name of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:202
+#: inkstitch-fonts-metadata.py:226
 msgid "Sortefax XL Initials"
 msgstr ""
 
 #. description of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:204
+#: inkstitch-fonts-metadata.py:228
 msgid " Sortefax is a very large satin stitch Capital font of size 150mm.  It can be reduced down to 75% and enlarged up to 200%  It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; )  to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame"
 msgstr ""
 
 #. name of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:206
+#: inkstitch-fonts-metadata.py:230
 msgid "Sortefax Medium Initials"
 msgstr ""
 
 #. description of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:208
+#: inkstitch-fonts-metadata.py:232
 msgid "Sortefax  Medium Initials is a  satin stitch Capital font of size 90 mm.  It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required"
 msgstr ""
 
 #. name of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:210
+#: inkstitch-fonts-metadata.py:234
 msgid "TT Directors"
 msgstr ""
 
 #. description of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:212
+#: inkstitch-fonts-metadata.py:236
 msgid "A font suited for directing"
 msgstr ""
 
 #. name of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:214
+#: inkstitch-fonts-metadata.py:238
 msgid "TT Masters"
 msgstr ""
 
 #. description of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:216
+#: inkstitch-fonts-metadata.py:240
 msgid "A font suited for heavy typing :)"
 msgstr ""
 
 #. name of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:218
+#: inkstitch-fonts-metadata.py:242
 msgid "Violin Serif"
 msgstr ""
 
 #. description of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:220
+#: inkstitch-fonts-metadata.py:244
 #, python-format
 msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches"
 msgstr ""

translations/messages_ca_ES.po

@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
-"PO-Revision-Date: 2024-04-13 00:56\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
+"PO-Revision-Date: 2024-04-22 01:10\n"
 "Last-Translator: \n"
 "Language-Team: Catalan\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -89,7 +89,7 @@ msgstr ""
 
 #. description of font in fonts/amitaclo_small
 #: inkstitch-fonts-metadata.py:24
-msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font)."
+msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font)."
 msgstr ""
 
 #. name of font in fonts/apex_lake
@@ -129,7 +129,7 @@ msgstr ""
 
 #. description of font in fonts/auberge_small
 #: inkstitch-fonts-metadata.py:40
-msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). "
+msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). "
 msgstr ""
 
 #. name of font in fonts/aventurina
@@ -153,446 +153,507 @@ msgstr ""
 msgid "The capital M is 22.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
-#. name of font in fonts/cherryforinkstitch
+#. name of font in fonts/baumans_FI_Small
 #: inkstitch-fonts-metadata.py:50
+msgid "Baumans FI small"
+msgstr ""
+
+#. description of font in fonts/baumans_FI_Small
+#: inkstitch-fonts-metadata.py:52
+msgid "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). "
+msgstr ""
+
+#. name of font in fonts/cherryforinkstitch
+#: inkstitch-fonts-metadata.py:54
 msgid "Cherry for inkstitch"
 msgstr ""
 
 #. description of font in fonts/cherryforinkstitch
-#: inkstitch-fonts-metadata.py:52
+#: inkstitch-fonts-metadata.py:56
 msgid "Cherry for inkstitch is a decorative satin column font of size approximatively 40mm. It can be reduced down to 80% and enlarged up to 180%. It contains 74 glyphs."
 msgstr ""
 
 #. name of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:54
+#: inkstitch-fonts-metadata.py:58
 msgid "Cherry for Kaalleen"
 msgstr ""
 
 #. description of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:56
+#: inkstitch-fonts-metadata.py:60
 msgid "Cherry for Kaalleen is a large decorative font of size approximatively 75mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged up to 130%"
 msgstr ""
 
+#. name of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:62
+msgid "Chicken Little KOR"
+msgstr ""
+
+#. description of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:64
+#, python-format
+msgid "Chicken Little  is a  playful decorative display font with loads of personality. There is no common baseline, no common character size and no common slope of the letters. M is 38 mm high.  The font may be scaled up to 200% and down to 50%. Beyond 110% some satin columns will split."
+msgstr ""
+
+#. name of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:66
+msgid "Chicken Little KOR Small"
+msgstr ""
+
+#. description of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:68
+msgid "This font is an altered version  of Chicken Little KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  Parameters of this font allow to scale down the original Chicken Little KOR font between 25% (for a 10 mm font ) and 45 % (for a 19mm font)."
+msgstr ""
+
 #. name of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:58
+#: inkstitch-fonts-metadata.py:70
 msgid "Chicken Scratch"
 msgstr ""
 
 #. description of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:60
+#: inkstitch-fonts-metadata.py:72
 #, python-format
 msgid "A handwritten font. Can be scaled up to 120% or down to 80%. Caps height is around 19mm or .75 inches."
 msgstr ""
 
 #. name of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:62
+#: inkstitch-fonts-metadata.py:74
 msgid "Chopin Script"
 msgstr ""
 
 #. description of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:64
+#: inkstitch-fonts-metadata.py:76
 #, python-format
 msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:66
+#: inkstitch-fonts-metadata.py:78
 msgid "Coronaviral"
 msgstr ""
 
 #. description of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:68
+#: inkstitch-fonts-metadata.py:80
 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%"
 msgstr ""
 
 #. name of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:70
+#: inkstitch-fonts-metadata.py:82
 msgid "Dejavu Serif"
 msgstr ""
 
 #. description of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:72
+#: inkstitch-fonts-metadata.py:84
 #, python-format
 msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
 msgstr ""
 
 #. name of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:74
+#: inkstitch-fonts-metadata.py:86
 msgid "Digory Doodles Bean"
 msgstr ""
 
 #. description of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:76
+#: inkstitch-fonts-metadata.py:88
 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm."
 msgstr ""
 
 #. name of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:78
+#: inkstitch-fonts-metadata.py:90
 msgid "DinoMouse72"
 msgstr ""
 
 #. description of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:80
+#: inkstitch-fonts-metadata.py:92
 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals"
 msgstr ""
 
 #. name of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:82
+#: inkstitch-fonts-metadata.py:94
 msgid "Emilio 20"
 msgstr ""
 
 #. description of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:84
+#: inkstitch-fonts-metadata.py:96
 #, python-format
 msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:86
+#: inkstitch-fonts-metadata.py:98
 msgid "EMILIO_20_Applique"
 msgstr ""
 
 #. description of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:88
+#: inkstitch-fonts-metadata.py:100
 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique"
 msgstr ""
 
 #. name of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:90
+#: inkstitch-fonts-metadata.py:102
 msgid "EMILIO_20_Bold"
 msgstr ""
 
 #. description of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:92
+#: inkstitch-fonts-metadata.py:104
 msgid "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high."
 msgstr ""
 
 #. name of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:94
+#: inkstitch-fonts-metadata.py:106
 msgid "Emilio 20 Simple"
 msgstr ""
 
 #. description of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:96
+#: inkstitch-fonts-metadata.py:108
 #, python-format
-msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
+msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay"
+msgstr ""
+
+#. name of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:110
+msgid "Emilio 20 Simple Small"
+msgstr ""
+
+#. description of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:112
+msgid "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)."
 msgstr ""
 
 #. name of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:98
+#: inkstitch-fonts-metadata.py:114
 msgid "EMILIO 20 TRICOLORE"
 msgstr ""
 
 #. description of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:100
+#: inkstitch-fonts-metadata.py:116
 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of  size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 90% and enlarged up to 120%"
 msgstr ""
 
 #. name of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:102
+#: inkstitch-fonts-metadata.py:118
 msgid "Espresso KOR"
 msgstr ""
 
 #. description of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:104
+#: inkstitch-fonts-metadata.py:120
 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%"
 msgstr ""
 
 #. name of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:106
+#: inkstitch-fonts-metadata.py:122
 msgid "Espresso tiny"
 msgstr ""
 
 #. description of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:108
+#: inkstitch-fonts-metadata.py:124
 msgid "This font is an altered version  of Espresso KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:110
+#: inkstitch-fonts-metadata.py:126
 msgid "Excalibur KOR"
 msgstr ""
 
 #. description of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:112
+#: inkstitch-fonts-metadata.py:128
 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs."
 msgstr ""
 
+#. name of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:130
+msgid "Excalibur small"
+msgstr ""
+
+#. description of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:132
+msgid "This font is an altered version  of Excalibur KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:114
+#: inkstitch-fonts-metadata.py:134
 msgid "Fold Ink/Stitch"
 msgstr ""
 
 #. description of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:116
+#: inkstitch-fonts-metadata.py:136
 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged as much as you like"
 msgstr ""
 
 #. name of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:118
+#: inkstitch-fonts-metadata.py:138
 msgid "Geneva Simple Sans Rounded"
 msgstr ""
 
 #. description of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:120
+#: inkstitch-fonts-metadata.py:140
 msgid "Suitable for small fonts (8 to 20 mm)"
 msgstr ""
 
 #. name of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:122
+#: inkstitch-fonts-metadata.py:142
 msgid "Geneva Simple Sans"
 msgstr ""
 
 #. description of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:124
+#: inkstitch-fonts-metadata.py:144
 msgid "Suitable for small fonts (6 to 15mm)"
 msgstr ""
 
 #. name of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:126
+#: inkstitch-fonts-metadata.py:146
 msgid "Glacial Tiny 60 AGS"
 msgstr ""
 
 #. description of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:128
-msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%."
+#: inkstitch-fonts-metadata.py:148
+msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%."
 msgstr ""
 
 #. name of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:130
+#: inkstitch-fonts-metadata.py:150
 msgid "InfiniPicto"
 msgstr ""
 
 #. description of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:132
+#: inkstitch-fonts-metadata.py:152
 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French"
 msgstr ""
 
 #. name of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:134
+#: inkstitch-fonts-metadata.py:154
 msgid "Kaushan Script MAM"
 msgstr ""
 
 #. description of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:136
+#: inkstitch-fonts-metadata.py:156
 #, python-format
 msgid "The capital M is 29 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 200%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:138
+#: inkstitch-fonts-metadata.py:158
 msgid "Learning curve"
 msgstr ""
 
 #. description of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:140
+#: inkstitch-fonts-metadata.py:160
 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%"
 msgstr ""
 
 #. name of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:142
+#: inkstitch-fonts-metadata.py:162
 msgid "Lobster AGS"
 msgstr ""
 
 #. description of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:144
+#: inkstitch-fonts-metadata.py:164
 #, python-format
 msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:146
+#: inkstitch-fonts-metadata.py:166
 msgid "Magnolia KOR"
 msgstr ""
 
 #. description of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:148
+#: inkstitch-fonts-metadata.py:168
 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%"
 msgstr ""
 
+#. name of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:170
+msgid "Magnolia small"
+msgstr ""
+
+#. description of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:172
+msgid "This font is an altered version  of Magnolia KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:150
+#: inkstitch-fonts-metadata.py:174
 msgid "Manuskript Gothisch"
 msgstr ""
 
 #. description of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:152
+#: inkstitch-fonts-metadata.py:176
 #, python-format
 msgid "The capital M is 35 millimeter wide at 100% scale.  Can be scaled down to 70% or up to 140%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:154
+#: inkstitch-fonts-metadata.py:178
 msgid "MarcellusSC-FI"
 msgstr ""
 
 #. description of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:156
+#: inkstitch-fonts-metadata.py:180
 #, python-format
 msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split"
 msgstr ""
 
 #. name of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:158
+#: inkstitch-fonts-metadata.py:182
 msgid "Ink/Stitch Medium Font"
 msgstr ""
 
 #. description of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:160
+#: inkstitch-fonts-metadata.py:184
 #, python-format
 msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
 msgstr ""
 
 #. name of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:162
+#: inkstitch-fonts-metadata.py:186
 msgid "Millimarif-bold20"
 msgstr ""
 
 #. description of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:164
+#: inkstitch-fonts-metadata.py:188
 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm."
 msgstr ""
 
 #. name of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:166
+#: inkstitch-fonts-metadata.py:190
 msgid "MONICHA"
 msgstr ""
 
 #. description of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:168
+#: inkstitch-fonts-metadata.py:192
 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. "
 msgstr ""
 
 #. name of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:170
+#: inkstitch-fonts-metadata.py:194
 msgid "Namskout"
 msgstr ""
 
 #. description of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:172
+#: inkstitch-fonts-metadata.py:196
 msgid "Namskout  is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals  A-Z.  It can be reduced down to 50% and enlarged up to 150%  "
 msgstr ""
 
 #. name of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:174
+#: inkstitch-fonts-metadata.py:198
 msgid "NickAinley"
 msgstr ""
 
 #. description of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:176
+#: inkstitch-fonts-metadata.py:200
 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn"
 msgstr ""
 
 #. name of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:178
+#: inkstitch-fonts-metadata.py:202
 msgid "Pacificlo"
 msgstr ""
 
 #. description of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:180
+#: inkstitch-fonts-metadata.py:204
 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. "
 msgstr ""
 
 #. name of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:182
+#: inkstitch-fonts-metadata.py:206
 msgid "Pacificlo tiny"
 msgstr ""
 
 #. description of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:184
+#: inkstitch-fonts-metadata.py:208
 msgid "This font is an altered version  of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:186
+#: inkstitch-fonts-metadata.py:210
 msgid "Roman AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:188
+#: inkstitch-fonts-metadata.py:212
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 130%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:190
+#: inkstitch-fonts-metadata.py:214
 msgid "Roman bicolor AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:192
+#: inkstitch-fonts-metadata.py:216
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:194
+#: inkstitch-fonts-metadata.py:218
 msgid "Sacramarif"
 msgstr ""
 
 #. description of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:196
+#: inkstitch-fonts-metadata.py:220
 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%"
 msgstr ""
 
 #. name of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:198
+#: inkstitch-fonts-metadata.py:222
 msgid "Ink/Stitch Small Font"
 msgstr ""
 
 #. description of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:200
+#: inkstitch-fonts-metadata.py:224
 #, python-format
 msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
 msgstr ""
 
 #. name of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:202
+#: inkstitch-fonts-metadata.py:226
 msgid "Sortefax XL Initials"
 msgstr ""
 
 #. description of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:204
+#: inkstitch-fonts-metadata.py:228
 msgid " Sortefax is a very large satin stitch Capital font of size 150mm.  It can be reduced down to 75% and enlarged up to 200%  It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; )  to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame"
 msgstr ""
 
 #. name of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:206
+#: inkstitch-fonts-metadata.py:230
 msgid "Sortefax Medium Initials"
 msgstr ""
 
 #. description of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:208
+#: inkstitch-fonts-metadata.py:232
 msgid "Sortefax  Medium Initials is a  satin stitch Capital font of size 90 mm.  It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required"
 msgstr ""
 
 #. name of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:210
+#: inkstitch-fonts-metadata.py:234
 msgid "TT Directors"
 msgstr ""
 
 #. description of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:212
+#: inkstitch-fonts-metadata.py:236
 msgid "A font suited for directing"
 msgstr ""
 
 #. name of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:214
+#: inkstitch-fonts-metadata.py:238
 msgid "TT Masters"
 msgstr ""
 
 #. description of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:216
+#: inkstitch-fonts-metadata.py:240
 msgid "A font suited for heavy typing :)"
 msgstr ""
 
 #. name of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:218
+#: inkstitch-fonts-metadata.py:242
 msgid "Violin Serif"
 msgstr ""
 
 #. description of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:220
+#: inkstitch-fonts-metadata.py:244
 #, python-format
 msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches"
 msgstr ""

translations/messages_cs_CZ.po

@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
-"PO-Revision-Date: 2024-04-13 00:56\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
+"PO-Revision-Date: 2024-04-22 01:10\n"
 "Last-Translator: \n"
 "Language-Team: Czech\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -89,7 +89,7 @@ msgstr "Amitaclo small"
 
 #. description of font in fonts/amitaclo_small
 #: inkstitch-fonts-metadata.py:24
-msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font)."
+msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font)."
 msgstr ""
 
 #. name of font in fonts/apex_lake
@@ -129,7 +129,7 @@ msgstr "Auberge malý"
 
 #. description of font in fonts/auberge_small
 #: inkstitch-fonts-metadata.py:40
-msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). "
+msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). "
 msgstr ""
 
 #. name of font in fonts/aventurina
@@ -153,446 +153,507 @@ msgstr "Baumans FI"
 msgid "The capital M is 22.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr "Velké písmeno M je ve 100% měřítku široké 22,3 milimetru. Lze zmenšit na 80 % nebo až na 150 %. Každý satén má klikatý podklad"
 
-#. name of font in fonts/cherryforinkstitch
+#. name of font in fonts/baumans_FI_Small
 #: inkstitch-fonts-metadata.py:50
+msgid "Baumans FI small"
+msgstr ""
+
+#. description of font in fonts/baumans_FI_Small
+#: inkstitch-fonts-metadata.py:52
+msgid "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). "
+msgstr ""
+
+#. name of font in fonts/cherryforinkstitch
+#: inkstitch-fonts-metadata.py:54
 msgid "Cherry for inkstitch"
 msgstr "Cherry for inkstitch"
 
 #. description of font in fonts/cherryforinkstitch
-#: inkstitch-fonts-metadata.py:52
+#: inkstitch-fonts-metadata.py:56
 msgid "Cherry for inkstitch is a decorative satin column font of size approximatively 40mm. It can be reduced down to 80% and enlarged up to 180%. It contains 74 glyphs."
 msgstr "Cherry for inkstitch je ozdobné saténové sloupcové písmo o velikosti přibližně 40 mm. Lze jej zmenšit na 80 % a zvětšit až na 180 %. Obsahuje 74 glyfů."
 
 #. name of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:54
+#: inkstitch-fonts-metadata.py:58
 msgid "Cherry for Kaalleen"
 msgstr "Cherry for Kaalleen"
 
 #. description of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:56
+#: inkstitch-fonts-metadata.py:60
 msgid "Cherry for Kaalleen is a large decorative font of size approximatively 75mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged up to 130%"
 msgstr "Cherry for Kaalleen je velké ozdobné písmo o velikosti přibližně 75 mm. Obsahuje 36 glyfů včetně číslic a 26 velkých písmen A-Z. Lze jej zmenšit na 80 % a zvětšit až na 130 %"
 
+#. name of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:62
+msgid "Chicken Little KOR"
+msgstr ""
+
+#. description of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:64
+#, python-format
+msgid "Chicken Little  is a  playful decorative display font with loads of personality. There is no common baseline, no common character size and no common slope of the letters. M is 38 mm high.  The font may be scaled up to 200% and down to 50%. Beyond 110% some satin columns will split."
+msgstr ""
+
+#. name of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:66
+msgid "Chicken Little KOR Small"
+msgstr ""
+
+#. description of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:68
+msgid "This font is an altered version  of Chicken Little KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  Parameters of this font allow to scale down the original Chicken Little KOR font between 25% (for a 10 mm font ) and 45 % (for a 19mm font)."
+msgstr ""
+
 #. name of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:58
+#: inkstitch-fonts-metadata.py:70
 msgid "Chicken Scratch"
 msgstr ""
 
 #. description of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:60
+#: inkstitch-fonts-metadata.py:72
 #, python-format
 msgid "A handwritten font. Can be scaled up to 120% or down to 80%. Caps height is around 19mm or .75 inches."
 msgstr ""
 
 #. name of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:62
+#: inkstitch-fonts-metadata.py:74
 msgid "Chopin Script"
 msgstr "Chopin Script"
 
 #. description of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:64
+#: inkstitch-fonts-metadata.py:76
 #, python-format
 msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay"
 msgstr "Velké písmeno M je ve 100% měřítku široké 38,3 milimetru. Lze zmenšit na 80 % nebo zvětšit až na 120 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:66
+#: inkstitch-fonts-metadata.py:78
 msgid "Coronaviral"
 msgstr "Coronaviral"
 
 #. description of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:68
+#: inkstitch-fonts-metadata.py:80
 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%"
 msgstr "Písmo vytvořené pomocí ručního sezení. Neměňte velikost nebo jen velmi málo. Šířka velkého písmene em je 22 mm při 100 %"
 
 #. name of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:70
+#: inkstitch-fonts-metadata.py:82
 msgid "Dejavu Serif"
 msgstr "Dejavu Serif"
 
 #. description of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:72
+#: inkstitch-fonts-metadata.py:84
 #, python-format
 msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
 msgstr "DejaVu Serif Condensed. Velké M je široké 19,8 milimetru ve 100% měřítku. Lze zmenšit na 80 % nebo až na 150 %. Každý satin má středový chodbičkový podklad."
 
 #. name of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:74
+#: inkstitch-fonts-metadata.py:86
 msgid "Digory Doodles Bean"
 msgstr "Digory Doodles Bean"
 
 #. description of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:76
+#: inkstitch-fonts-metadata.py:88
 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm."
 msgstr "Všechna písmena mají smíšený saténový a fazolový steh. Velké M je vysoké 16 mm. Malé x má 7 mm."
 
 #. name of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:78
+#: inkstitch-fonts-metadata.py:90
 msgid "DinoMouse72"
 msgstr "DinoMouse72"
 
 #. description of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:80
+#: inkstitch-fonts-metadata.py:92
 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals"
 msgstr "Font Grove jawn. Šířka saténu je 2,5 mm při 18mm velkých písmenech"
 
 #. name of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:82
+#: inkstitch-fonts-metadata.py:94
 msgid "Emilio 20"
 msgstr "Emilio 20"
 
 #. description of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:84
+#: inkstitch-fonts-metadata.py:96
 #, python-format
 msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
 msgstr "Emilio 20 je písmo s velkými písmeny a číslicemi. Šířka písmene M je 48,5 milimetru při 100% měřítku. Může být zmenšeno na 70 % nebo až na 140 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:86
+#: inkstitch-fonts-metadata.py:98
 msgid "EMILIO_20_Applique"
 msgstr ""
 
 #. description of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:88
+#: inkstitch-fonts-metadata.py:100
 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique"
 msgstr ""
 
 #. name of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:90
+#: inkstitch-fonts-metadata.py:102
 msgid "EMILIO_20_Bold"
 msgstr ""
 
 #. description of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:92
+#: inkstitch-fonts-metadata.py:104
 msgid "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high."
 msgstr ""
 
 #. name of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:94
+#: inkstitch-fonts-metadata.py:106
 msgid "Emilio 20 Simple"
 msgstr "Emilio 20 jednoduchý"
 
 #. description of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:96
+#: inkstitch-fonts-metadata.py:108
 #, python-format
-msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
+msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay"
+msgstr ""
+
+#. name of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:110
+msgid "Emilio 20 Simple Small"
+msgstr ""
+
+#. description of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:112
+msgid "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)."
 msgstr ""
 
 #. name of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:98
+#: inkstitch-fonts-metadata.py:114
 msgid "EMILIO 20 TRICOLORE"
 msgstr "Emilio 20 Tricolore"
 
 #. description of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:100
+#: inkstitch-fonts-metadata.py:116
 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of  size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 90% and enlarged up to 120%"
 msgstr "Emilio 20 tricolore je velké tříbarevné písmo s výplňovými stehy a saténovými sloupci o velikosti přibližně 100 mm. Obsahuje 36 glyfů včetně číslic a 26 velkých písmen A-Z. Lze jej zmenšit na 90 % a zvětšit až na 120 %"
 
 #. name of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:102
+#: inkstitch-fonts-metadata.py:118
 msgid "Espresso KOR"
 msgstr "Espresso KOR"
 
 #. description of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:104
+#: inkstitch-fonts-metadata.py:120
 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%"
 msgstr "Velké písmeno M je vysoké 16,2 mm v měřítku 100. Každý satén má klikatý podklad. x je vysoké 11,5 mm, q je vysoké 17,5 mm, l je vysoké 17,2 mm. Písmo lze měnit až na 200 % a na 80 %"
 
 #. name of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:106
+#: inkstitch-fonts-metadata.py:122
 msgid "Espresso tiny"
 msgstr "Espresso tiny"
 
 #. description of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:108
+#: inkstitch-fonts-metadata.py:124
 msgid "This font is an altered version  of Espresso KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:110
+#: inkstitch-fonts-metadata.py:126
 msgid "Excalibur KOR"
 msgstr "Excalibur KOR"
 
 #. description of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:112
+#: inkstitch-fonts-metadata.py:128
 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs."
 msgstr ""
 
+#. name of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:130
+msgid "Excalibur small"
+msgstr ""
+
+#. description of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:132
+msgid "This font is an altered version  of Excalibur KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:114
+#: inkstitch-fonts-metadata.py:134
 msgid "Fold Ink/Stitch"
 msgstr "Fold Ink/Stitch"
 
 #. description of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:116
+#: inkstitch-fonts-metadata.py:136
 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged as much as you like"
 msgstr ""
 
 #. name of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:118
+#: inkstitch-fonts-metadata.py:138
 msgid "Geneva Simple Sans Rounded"
 msgstr "Geneva Simple Sans Rounded"
 
 #. description of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:120
+#: inkstitch-fonts-metadata.py:140
 msgid "Suitable for small fonts (8 to 20 mm)"
 msgstr "Použitelné pro malá písma (od 8 do 20 mm)"
 
 #. name of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:122
+#: inkstitch-fonts-metadata.py:142
 msgid "Geneva Simple Sans"
 msgstr "Geneva Simple Sans"
 
 #. description of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:124
+#: inkstitch-fonts-metadata.py:144
 msgid "Suitable for small fonts (6 to 15mm)"
 msgstr "Použitelné pro malá písma (od 6 do 15 mm)"
 
 #. name of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:126
+#: inkstitch-fonts-metadata.py:146
 msgid "Glacial Tiny 60 AGS"
 msgstr "Glacial Tiny 60 AGS"
 
 #. description of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:128
-msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%."
+#: inkstitch-fonts-metadata.py:148
+msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%."
 msgstr ""
 
 #. name of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:130
+#: inkstitch-fonts-metadata.py:150
 msgid "InfiniPicto"
 msgstr "InfiniPicto"
 
 #. description of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:132
+#: inkstitch-fonts-metadata.py:152
 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French"
 msgstr "InfiniPicto je zábavné písmo o velikosti přibližně 70 mm, které obsahuje pouze 26 znaků A-Z. Každé písmeno je piktogramem předmětu, jehož název začíná právě tímto písmenem..... ve francouzštině"
 
 #. name of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:134
+#: inkstitch-fonts-metadata.py:154
 msgid "Kaushan Script MAM"
 msgstr "Kaushan Script MAM"
 
 #. description of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:136
+#: inkstitch-fonts-metadata.py:156
 #, python-format
 msgid "The capital M is 29 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 200%.  Every satin has zigzag underlay"
 msgstr "Velké písmeno M je ve 100% měřítku široké 29 milimetrů. Lze zmenšit na 80 % nebo až na 200 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:138
+#: inkstitch-fonts-metadata.py:158
 msgid "Learning curve"
 msgstr "Learning curve"
 
 #. description of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:140
+#: inkstitch-fonts-metadata.py:160
 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%"
 msgstr "Malé písmo s běžícím stehem o velikosti přibližně 12 mm. Lze jej zmenšit na 90 % a zvětšit až na 200 %"
 
 #. name of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:142
+#: inkstitch-fonts-metadata.py:162
 msgid "Lobster AGS"
 msgstr "Lobster AGS"
 
 #. description of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:144
+#: inkstitch-fonts-metadata.py:164
 #, python-format
 msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr "Velké písmeno M je ve 100% měřítku široké 19,8 milimetru. Lze zmenšit na 80 % nebo až na 150 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:146
+#: inkstitch-fonts-metadata.py:166
 msgid "Magnolia KOR"
 msgstr "Magnolia KOR"
 
 #. description of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:148
+#: inkstitch-fonts-metadata.py:168
 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%"
 msgstr "Magnolia KOR je skriptové písmo o velikosti přibližně 20 mm. Může být zmenšeno na 80 % a až na 120 %"
 
+#. name of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:170
+msgid "Magnolia small"
+msgstr ""
+
+#. description of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:172
+msgid "This font is an altered version  of Magnolia KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:150
+#: inkstitch-fonts-metadata.py:174
 msgid "Manuskript Gothisch"
 msgstr "Manuskript Gothisch"
 
 #. description of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:152
+#: inkstitch-fonts-metadata.py:176
 #, python-format
 msgid "The capital M is 35 millimeter wide at 100% scale.  Can be scaled down to 70% or up to 140%.  Every satin has zigzag underlay"
 msgstr "Velké písmeno M je ve 100% měřítku široké 35 milimetrů. Lze zmenšit na 70 % nebo až na 140 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:154
+#: inkstitch-fonts-metadata.py:178
 msgid "MarcellusSC-FI"
 msgstr "MarcellusSC-FI"
 
 #. description of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:156
+#: inkstitch-fonts-metadata.py:180
 #, python-format
 msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split"
 msgstr "MarcellusSC-FI je malé velké písmo o velikosti 36 mm. Obsahuje 107 glyfů pokrývajících většinu západoevropských jazyků. Lze jej zmenšit na 70 % a zvětšit až na 200 % nebo 500 % pomocí satinového dělení"
 
 #. name of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:158
+#: inkstitch-fonts-metadata.py:182
 msgid "Ink/Stitch Medium Font"
 msgstr "Ink/Stitch střední písmo"
 
 #. description of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:160
+#: inkstitch-fonts-metadata.py:184
 #, python-format
 msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
 msgstr "Základní písmo vhodné pro středně velké znaky. Velké písmeno em je široké 0,6 palce při 100% měřítku. Může být zmenšeno na 75 % nebo až na 150 %. Každý satin má obrysové podložení."
 
 #. name of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:162
+#: inkstitch-fonts-metadata.py:186
 msgid "Millimarif-bold20"
 msgstr ""
 
 #. description of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:164
+#: inkstitch-fonts-metadata.py:188
 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm."
 msgstr ""
 
 #. name of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:166
+#: inkstitch-fonts-metadata.py:190
 msgid "MONICHA"
 msgstr "Monicha"
 
 #. description of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:168
+#: inkstitch-fonts-metadata.py:192
 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. "
 msgstr "Monicha je saténové písmo o velikosti přibližně 20 mm. Kromě glyfů pokrývajících většinu západoevropských jazyků obsahuje další ornamentální písmena s lomítky. Tato ornamentální písmena by měla být používána s opatrností, aby nedocházelo k jejich překrývání. Zejména nepoužívejte dvě ornamentální písmena za sebou. Informace o přístupu k ornamentálním písmenům naleznete v dokumentaci. Písmo nelze zmenšit, ale lze jej zvětšit až na 150 %."
 
 #. name of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:170
+#: inkstitch-fonts-metadata.py:194
 msgid "Namskout"
 msgstr "Namskout"
 
 #. description of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:172
+#: inkstitch-fonts-metadata.py:196
 msgid "Namskout  is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals  A-Z.  It can be reduced down to 50% and enlarged up to 150%  "
 msgstr "Namskout je velké aplikační písmo o velikosti přibližně 90 mm. Obsahuje 43 glyfů včetně všech číslic a 26 velkých písmen A-Z. Lze jej zmenšit na 50 % a zvětšit až na 150 %"
 
 #. name of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:174
+#: inkstitch-fonts-metadata.py:198
 msgid "NickAinley"
 msgstr "NickAinley"
 
 #. description of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:176
+#: inkstitch-fonts-metadata.py:200
 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn"
 msgstr "Malá abeceda o velikosti 1 mm založená na 24pt Seniors Studio jawn"
 
 #. name of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:178
+#: inkstitch-fonts-metadata.py:202
 msgid "Pacificlo"
 msgstr "Pacificlo"
 
 #. description of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:180
+#: inkstitch-fonts-metadata.py:204
 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. "
 msgstr "Pacificlo je malé saténové sloupcové rukopisné písmo o velikosti přibližně 20 mm. Lze jej zmenšit na 80 % a zvětšit až na 140 %. Obsahuje 120 glyfů, které pokrývají většinu potřeb západoevropských jazyků."
 
 #. name of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:182
+#: inkstitch-fonts-metadata.py:206
 msgid "Pacificlo tiny"
 msgstr "Pacificlo tiny"
 
 #. description of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:184
+#: inkstitch-fonts-metadata.py:208
 msgid "This font is an altered version  of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr "Toto písmo je upravenou verzí písma Pacificlo, která umožňuje větší zmenšení. Tenká nit (60) i tenká jehla (60) jsou povinné. Změněné parametry vyšívání tohoto písma umožňují zmenšit původní písmo Pacificlo o 25 % (pro písmo 5 mm ) až 55 % (pro písmo 11 mm)."
 
 #. name of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:186
+#: inkstitch-fonts-metadata.py:210
 msgid "Roman AGS"
 msgstr "Roman AGS"
 
 #. description of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:188
+#: inkstitch-fonts-metadata.py:212
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 130%.  Every satin has zigzag underlay"
 msgstr "Založeno na latince Modern Roman 10 Bold italic. Velké M je široké 42,5 milimetru při 100% měřítku. Lze zmenšit na 80 % nebo až na 130 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:190
+#: inkstitch-fonts-metadata.py:214
 msgid "Roman bicolor AGS"
 msgstr "Roman bicolor AGS"
 
 #. description of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:192
+#: inkstitch-fonts-metadata.py:216
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay"
 msgstr "Založeno na latince Modern Roman 10 Bold italic. Písmo s velkými písmeny se 2 barvami. Velmi snadné použití s písmeny z Romanaugusa. Velké M je široké 42,5 milimetru při 100% měřítku. Lze zmenšit na 70 % nebo až na 130 %. Každý satén má klikatý podklad"
 
 #. name of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:194
+#: inkstitch-fonts-metadata.py:218
 msgid "Sacramarif"
 msgstr "Sacramarif"
 
 #. description of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:196
+#: inkstitch-fonts-metadata.py:220
 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%"
 msgstr "Založeno v Sacramentu. Velmi malé písmo s běžícím stehem. Lze jej měnit v měřítku od 80 % do 150 %"
 
 #. name of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:198
+#: inkstitch-fonts-metadata.py:222
 msgid "Ink/Stitch Small Font"
 msgstr "Ink/Stitch malé písmo"
 
 #. description of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:200
+#: inkstitch-fonts-metadata.py:224
 #, python-format
 msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
 msgstr "Písmo vhodné pro malé znaky. Velké písmeno em je široké 0,2 palce při 100% měřítku. Lze měnit až na 300 %."
 
 #. name of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:202
+#: inkstitch-fonts-metadata.py:226
 msgid "Sortefax XL Initials"
 msgstr "Sortefax XL Initials"
 
 #. description of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:204
+#: inkstitch-fonts-metadata.py:228
 msgid " Sortefax is a very large satin stitch Capital font of size 150mm.  It can be reduced down to 75% and enlarged up to 200%  It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; )  to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame"
 msgstr "Sortefax je velmi velké saténový steh Capital o velikosti 150 mm. Lze jej zmenšit na 75 % a zvětšit až na 200 % Obsahuje 37 glyfů :ampersand, A-Z a 0-9. Kromě toho se deset glyfů (){}[],;.: používá k ukládání rámečků. Zadáním libovolného písmene následovaného libovolným rámečkem (např. A( nebo B; ) získáte orámované velké písmeno nebo číslo. Upozornění: u několika velkých písmen bude nutné rámeček ručně zvětšit"
 
 #. name of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:206
+#: inkstitch-fonts-metadata.py:230
 msgid "Sortefax Medium Initials"
 msgstr "Sortefax Medium Initials"
 
 #. description of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:208
+#: inkstitch-fonts-metadata.py:232
 msgid "Sortefax  Medium Initials is a  satin stitch Capital font of size 90 mm.  It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required"
 msgstr "Sortefax Medium Initials je saténovým stehem psané písmo velikosti 90 mm. Lze jej zmenšit na 70 % a zvětšit až na 200 %. Obsahuje 37 glyfů :ampersand, A-Z a 0-9. Kromě toho je deset glyfů (){}[],;.: použito pro uložení rámečků. Zadáním libovolného písmene následovaného libovolným rámečkem (např. A( nebo B; nebo 7, ) získáte orámované velké písmeno nebo číslo. Může být nutné ruční uspořádání rámečku kolem písmene"
 
 #. name of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:210
+#: inkstitch-fonts-metadata.py:234
 msgid "TT Directors"
 msgstr "TT Directors"
 
 #. description of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:212
+#: inkstitch-fonts-metadata.py:236
 msgid "A font suited for directing"
 msgstr "Písmo vhodné pro režii"
 
 #. name of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:214
+#: inkstitch-fonts-metadata.py:238
 msgid "TT Masters"
 msgstr "TT Masters"
 
 #. description of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:216
+#: inkstitch-fonts-metadata.py:240
 msgid "A font suited for heavy typing :)"
 msgstr "Písmo vhodné pro delší texty :)"
 
 #. name of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:218
+#: inkstitch-fonts-metadata.py:242
 msgid "Violin Serif"
 msgstr ""
 
 #. description of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:220
+#: inkstitch-fonts-metadata.py:244
 #, python-format
 msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches"
 msgstr ""

translations/messages_da_DK.po

@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
-"PO-Revision-Date: 2024-04-13 00:56\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
+"PO-Revision-Date: 2024-04-22 01:10\n"
 "Last-Translator: \n"
 "Language-Team: Danish\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-04-13 00:55+0000\n"
+"POT-Creation-Date: 2024-04-22 01:10+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -89,7 +89,7 @@ msgstr "Amitaclo lille"
 
 #. description of font in fonts/amitaclo_small
 #: inkstitch-fonts-metadata.py:24
-msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 30% (for a 8 mm font ) and 55 % (for a 16mm font)."
+msgid "This font is an altered version  of Amitaclo, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  parameters of this font allow to scale down the original Amitaclo font between 20% (for a 6 mm font ) and 55 % (for a 16mm font)."
 msgstr ""
 
 #. name of font in fonts/apex_lake
@@ -129,7 +129,7 @@ msgstr ""
 
 #. description of font in fonts/auberge_small
 #: inkstitch-fonts-metadata.py:40
-msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Grand Hotel font between 25% (for a 9mm font ) and 55 % (for a 20 mm font). "
+msgid "This font is an altered version  of Auberge Marif, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Auberge Marif font between 20% (for a 7mm font ) and 55 % (for a 20 mm font). "
 msgstr ""
 
 #. name of font in fonts/aventurina
@@ -153,446 +153,507 @@ msgstr ""
 msgid "The capital M is 22.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr "Det store M er 22,3 millimeter bredt ved 100 % skala. Kan skaleres ned til 80 % eller op til 150 %. Hver satinsøm har et zigzag-underlag"
 
-#. name of font in fonts/cherryforinkstitch
+#. name of font in fonts/baumans_FI_Small
 #: inkstitch-fonts-metadata.py:50
+msgid "Baumans FI small"
+msgstr ""
+
+#. description of font in fonts/baumans_FI_Small
+#: inkstitch-fonts-metadata.py:52
+msgid "This font is an altered version  of Baumans FI, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Baumanns FI font between 15% (for a 7mm font ) and 30 % (for a 14 mm font). "
+msgstr ""
+
+#. name of font in fonts/cherryforinkstitch
+#: inkstitch-fonts-metadata.py:54
 msgid "Cherry for inkstitch"
 msgstr ""
 
 #. description of font in fonts/cherryforinkstitch
-#: inkstitch-fonts-metadata.py:52
+#: inkstitch-fonts-metadata.py:56
 msgid "Cherry for inkstitch is a decorative satin column font of size approximatively 40mm. It can be reduced down to 80% and enlarged up to 180%. It contains 74 glyphs."
 msgstr "Cherry for inkstitch er en dekorativ satinsøm-skrifttype med en størrelse på cirka 40 mm. Den kan reduceres ned til 80% og forstørres op til 180%. Den indeholder 74 glyffer."
 
 #. name of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:54
+#: inkstitch-fonts-metadata.py:58
 msgid "Cherry for Kaalleen"
 msgstr ""
 
 #. description of font in fonts/cherryforkaalleen
-#: inkstitch-fonts-metadata.py:56
+#: inkstitch-fonts-metadata.py:60
 msgid "Cherry for Kaalleen is a large decorative font of size approximatively 75mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged up to 130%"
 msgstr "Cherry for Kaalleen er en stor dekorativ skrifttype med en størrelse på cirka 75 mm. Den indeholder 36 glyffer inklusive tallene og de 26 versaler A-Z. Den kan reduceres ned til 80 % og forstørres op til 130 %"
 
+#. name of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:62
+msgid "Chicken Little KOR"
+msgstr ""
+
+#. description of font in fonts/chicken_little
+#: inkstitch-fonts-metadata.py:64
+#, python-format
+msgid "Chicken Little  is a  playful decorative display font with loads of personality. There is no common baseline, no common character size and no common slope of the letters. M is 38 mm high.  The font may be scaled up to 200% and down to 50%. Beyond 110% some satin columns will split."
+msgstr ""
+
+#. name of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:66
+msgid "Chicken Little KOR Small"
+msgstr ""
+
+#. description of font in fonts/chicken_little_small
+#: inkstitch-fonts-metadata.py:68
+msgid "This font is an altered version  of Chicken Little KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory.  Parameters of this font allow to scale down the original Chicken Little KOR font between 25% (for a 10 mm font ) and 45 % (for a 19mm font)."
+msgstr ""
+
 #. name of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:58
+#: inkstitch-fonts-metadata.py:70
 msgid "Chicken Scratch"
 msgstr ""
 
 #. description of font in fonts/chicken_scratch
-#: inkstitch-fonts-metadata.py:60
+#: inkstitch-fonts-metadata.py:72
 #, python-format
 msgid "A handwritten font. Can be scaled up to 120% or down to 80%. Caps height is around 19mm or .75 inches."
 msgstr ""
 
 #. name of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:62
+#: inkstitch-fonts-metadata.py:74
 msgid "Chopin Script"
 msgstr ""
 
 #. description of font in fonts/chopin
-#: inkstitch-fonts-metadata.py:64
+#: inkstitch-fonts-metadata.py:76
 #, python-format
 msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay"
 msgstr "Det store M er 38,3 millimeter bredt ved 100 % skala. Kan skaleres ned til 80 % eller op til 120 %. Hver satinsøm har zigzag-underlag"
 
 #. name of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:66
+#: inkstitch-fonts-metadata.py:78
 msgid "Coronaviral"
 msgstr ""
 
 #. description of font in fonts/coronaviral
-#: inkstitch-fonts-metadata.py:68
+#: inkstitch-fonts-metadata.py:80
 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%"
 msgstr "En skrifttype lavet med manuelle sting. Undgå at ændre størrelsen eller begæns det til kun lidt. Kapitalen er 22 mm bred ved 100 %"
 
 #. name of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:70
+#: inkstitch-fonts-metadata.py:82
 msgid "Dejavu Serif"
 msgstr ""
 
 #. description of font in fonts/dejavufont
-#: inkstitch-fonts-metadata.py:72
+#: inkstitch-fonts-metadata.py:84
 #, python-format
 msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 150%.  Every satin has center-walk underlay."
 msgstr "DejaVu Serif sammenpakket. Det store M er 19,8 millimeter bredt ved 100 % skala. Kan skaleres ned til 80 % eller op til 150 %. Hver satinsøm har \"center-walk\" underlag."
 
 #. name of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:74
+#: inkstitch-fonts-metadata.py:86
 msgid "Digory Doodles Bean"
 msgstr ""
 
 #. description of font in fonts/digory_doodles_bean
-#: inkstitch-fonts-metadata.py:76
+#: inkstitch-fonts-metadata.py:88
 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm."
 msgstr "Alle bogstaver har blandet satinsøm og \"bean stitch\". Det store M er 16 mm højt. Det lille x er 7 mm."
 
 #. name of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:78
+#: inkstitch-fonts-metadata.py:90
 msgid "DinoMouse72"
 msgstr ""
 
 #. description of font in fonts/dinomouse72
-#: inkstitch-fonts-metadata.py:80
+#: inkstitch-fonts-metadata.py:92
 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals"
 msgstr "En Font Grove jawn. Satinbredden er 2,5 mm ved 18 mm store bogstaver"
 
 #. name of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:82
+#: inkstitch-fonts-metadata.py:94
 msgid "Emilio 20"
 msgstr ""
 
 #. description of font in fonts/emilio_20
-#: inkstitch-fonts-metadata.py:84
+#: inkstitch-fonts-metadata.py:96
 #, python-format
 msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
 msgstr "Emilio 20 er en skrifttype med kun store bogstaver og tal. M er 48,5 millimeter bred ved 100 % skala. Kan skaleres ned til 70 % eller op til 140 %. Hver satinsøm har zigzag-underlag"
 
 #. name of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:86
+#: inkstitch-fonts-metadata.py:98
 msgid "EMILIO_20_Applique"
 msgstr ""
 
 #. description of font in fonts/emilio_20_applique
-#: inkstitch-fonts-metadata.py:88
+#: inkstitch-fonts-metadata.py:100
 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is  Emilio_20_applique without the applique"
 msgstr ""
 
 #. name of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:90
+#: inkstitch-fonts-metadata.py:102
 msgid "EMILIO_20_Bold"
 msgstr ""
 
 #. description of font in fonts/emilio_20_bold
-#: inkstitch-fonts-metadata.py:92
+#: inkstitch-fonts-metadata.py:104
 msgid "Emilio_20_Bold is an altered version of Emilio_20  and is approximatively 50mm high."
 msgstr ""
 
 #. name of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:94
+#: inkstitch-fonts-metadata.py:106
 msgid "Emilio 20 Simple"
 msgstr ""
 
 #. description of font in fonts/emilio_20_simple
-#: inkstitch-fonts-metadata.py:96
+#: inkstitch-fonts-metadata.py:108
 #, python-format
-msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay"
+msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay"
+msgstr ""
+
+#. name of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:110
+msgid "Emilio 20 Simple Small"
+msgstr ""
+
+#. description of font in fonts/emilio_20_simple_small
+#: inkstitch-fonts-metadata.py:112
+msgid "This font is an altered version  of Emilio 20 simple, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)."
 msgstr ""
 
 #. name of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:98
+#: inkstitch-fonts-metadata.py:114
 msgid "EMILIO 20 TRICOLORE"
 msgstr ""
 
 #. description of font in fonts/emilio_20_tricolore
-#: inkstitch-fonts-metadata.py:100
+#: inkstitch-fonts-metadata.py:116
 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of  size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals  A-Z. It can be reduced down to 90% and enlarged up to 120%"
 msgstr "Emilio 20 tricolore er en stor trefarvet skrifttype med fyldningssømme og satinsøm med en størrelse på cirka 100 mm. Den indeholder 36 glyffer inklusive tallene og de 26 versaler A-Z. Den kan reduceres ned til 90% og forstørres op til 120%"
 
 #. name of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:102
+#: inkstitch-fonts-metadata.py:118
 msgid "Espresso KOR"
 msgstr "Espresso KOR"
 
 #. description of font in fonts/espresso_KOR
-#: inkstitch-fonts-metadata.py:104
+#: inkstitch-fonts-metadata.py:120
 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%"
 msgstr ""
 
 #. name of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:106
+#: inkstitch-fonts-metadata.py:122
 msgid "Espresso tiny"
 msgstr "Espresso lille"
 
 #. description of font in fonts/espresso_tiny
-#: inkstitch-fonts-metadata.py:108
+#: inkstitch-fonts-metadata.py:124
 msgid "This font is an altered version  of Espresso KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:110
+#: inkstitch-fonts-metadata.py:126
 msgid "Excalibur KOR"
 msgstr ""
 
 #. description of font in fonts/excalibur_KOR
-#: inkstitch-fonts-metadata.py:112
+#: inkstitch-fonts-metadata.py:128
 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs."
 msgstr ""
 
+#. name of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:130
+msgid "Excalibur small"
+msgstr ""
+
+#. description of font in fonts/excalibur_small
+#: inkstitch-fonts-metadata.py:132
+msgid "This font is an altered version  of Excalibur KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:114
+#: inkstitch-fonts-metadata.py:134
 msgid "Fold Ink/Stitch"
 msgstr "Fold Ink/Stitch"
 
 #. description of font in fonts/fold_inkstitch
-#: inkstitch-fonts-metadata.py:116
+#: inkstitch-fonts-metadata.py:136
 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals  A-Z. It can be reduced down to 80% and enlarged as much as you like"
 msgstr ""
 
 #. name of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:118
+#: inkstitch-fonts-metadata.py:138
 msgid "Geneva Simple Sans Rounded"
 msgstr "Geneva Simple Sans Afrundet"
 
 #. description of font in fonts/geneva_rounded
-#: inkstitch-fonts-metadata.py:120
+#: inkstitch-fonts-metadata.py:140
 msgid "Suitable for small fonts (8 to 20 mm)"
 msgstr "Velegnet til små skrifttyper (8 til 20 mm)"
 
 #. name of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:122
+#: inkstitch-fonts-metadata.py:142
 msgid "Geneva Simple Sans"
 msgstr ""
 
 #. description of font in fonts/geneva_simple
-#: inkstitch-fonts-metadata.py:124
+#: inkstitch-fonts-metadata.py:144
 msgid "Suitable for small fonts (6 to 15mm)"
 msgstr ""
 
 #. name of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:126
+#: inkstitch-fonts-metadata.py:146
 msgid "Glacial Tiny 60 AGS"
 msgstr ""
 
 #. description of font in fonts/glacial_tiny
-#: inkstitch-fonts-metadata.py:128
-msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 40% and enlarged up to 150%."
+#: inkstitch-fonts-metadata.py:148
+msgid "Glacial is a very tiny font: at 100%,  M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%."
 msgstr ""
 
 #. name of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:130
+#: inkstitch-fonts-metadata.py:150
 msgid "InfiniPicto"
 msgstr ""
 
 #. description of font in fonts/infinipicto
-#: inkstitch-fonts-metadata.py:132
+#: inkstitch-fonts-metadata.py:152
 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French"
 msgstr ""
 
 #. name of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:134
+#: inkstitch-fonts-metadata.py:154
 msgid "Kaushan Script MAM"
 msgstr ""
 
 #. description of font in fonts/kaushan_script_MAM
-#: inkstitch-fonts-metadata.py:136
+#: inkstitch-fonts-metadata.py:156
 #, python-format
 msgid "The capital M is 29 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 200%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:138
+#: inkstitch-fonts-metadata.py:158
 msgid "Learning curve"
 msgstr ""
 
 #. description of font in fonts/learning_curve
-#: inkstitch-fonts-metadata.py:140
+#: inkstitch-fonts-metadata.py:160
 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%"
 msgstr ""
 
 #. name of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:142
+#: inkstitch-fonts-metadata.py:162
 msgid "Lobster AGS"
 msgstr ""
 
 #. description of font in fonts/lobster_AGS
-#: inkstitch-fonts-metadata.py:144
+#: inkstitch-fonts-metadata.py:164
 #, python-format
 msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:146
+#: inkstitch-fonts-metadata.py:166
 msgid "Magnolia KOR"
 msgstr ""
 
 #. description of font in fonts/magnolia_KOR
-#: inkstitch-fonts-metadata.py:148
+#: inkstitch-fonts-metadata.py:168
 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%"
 msgstr ""
 
+#. name of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:170
+msgid "Magnolia small"
+msgstr ""
+
+#. description of font in fonts/magnolia_small
+#: inkstitch-fonts-metadata.py:172
+msgid "This font is an altered version  of Magnolia KOR, to allow a greater scaling down. The use of both  thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)."
+msgstr ""
+
 #. name of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:150
+#: inkstitch-fonts-metadata.py:174
 msgid "Manuskript Gothisch"
 msgstr ""
 
 #. description of font in fonts/manuskript_gotisch
-#: inkstitch-fonts-metadata.py:152
+#: inkstitch-fonts-metadata.py:176
 #, python-format
 msgid "The capital M is 35 millimeter wide at 100% scale.  Can be scaled down to 70% or up to 140%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:154
+#: inkstitch-fonts-metadata.py:178
 msgid "MarcellusSC-FI"
 msgstr ""
 
 #. description of font in fonts/marcelusSC_FI
-#: inkstitch-fonts-metadata.py:156
+#: inkstitch-fonts-metadata.py:180
 #, python-format
 msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split"
 msgstr ""
 
 #. name of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:158
+#: inkstitch-fonts-metadata.py:182
 msgid "Ink/Stitch Medium Font"
 msgstr ""
 
 #. description of font in fonts/medium_font
-#: inkstitch-fonts-metadata.py:160
+#: inkstitch-fonts-metadata.py:184
 #, python-format
 msgid "A basic font suited for medium-sized characters.  The capital em is 0.6 inches wide at 100% scale.  Can be scaled down to 75% or up to 150%.  Every satin has contour underlay."
 msgstr ""
 
 #. name of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:162
+#: inkstitch-fonts-metadata.py:186
 msgid "Millimarif-bold20"
 msgstr ""
 
 #. description of font in fonts/milli_marif_bold
-#: inkstitch-fonts-metadata.py:164
+#: inkstitch-fonts-metadata.py:188
 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm."
 msgstr ""
 
 #. name of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:166
+#: inkstitch-fonts-metadata.py:190
 msgid "MONICHA"
 msgstr ""
 
 #. description of font in fonts/monicha
-#: inkstitch-fonts-metadata.py:168
+#: inkstitch-fonts-metadata.py:192
 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. "
 msgstr ""
 
 #. name of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:170
+#: inkstitch-fonts-metadata.py:194
 msgid "Namskout"
 msgstr ""
 
 #. description of font in fonts/namskout_AGS
-#: inkstitch-fonts-metadata.py:172
+#: inkstitch-fonts-metadata.py:196
 msgid "Namskout  is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals  A-Z.  It can be reduced down to 50% and enlarged up to 150%  "
 msgstr ""
 
 #. name of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:174
+#: inkstitch-fonts-metadata.py:198
 msgid "NickAinley"
 msgstr ""
 
 #. description of font in fonts/nick_ainley
-#: inkstitch-fonts-metadata.py:176
+#: inkstitch-fonts-metadata.py:200
 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn"
 msgstr ""
 
 #. name of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:178
+#: inkstitch-fonts-metadata.py:202
 msgid "Pacificlo"
 msgstr ""
 
 #. description of font in fonts/pacificlo
-#: inkstitch-fonts-metadata.py:180
+#: inkstitch-fonts-metadata.py:204
 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. "
 msgstr ""
 
 #. name of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:182
+#: inkstitch-fonts-metadata.py:206
 msgid "Pacificlo tiny"
 msgstr ""
 
 #. description of font in fonts/pacificlo_tiny
-#: inkstitch-fonts-metadata.py:184
+#: inkstitch-fonts-metadata.py:208
 msgid "This font is an altered version  of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)."
 msgstr ""
 
 #. name of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:186
+#: inkstitch-fonts-metadata.py:210
 msgid "Roman AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags
-#: inkstitch-fonts-metadata.py:188
+#: inkstitch-fonts-metadata.py:212
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale.  Can be scaled down to 80% or up to 130%.  Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:190
+#: inkstitch-fonts-metadata.py:214
 msgid "Roman bicolor AGS"
 msgstr ""
 
 #. description of font in fonts/roman_ags_bicolor
-#: inkstitch-fonts-metadata.py:192
+#: inkstitch-fonts-metadata.py:216
 #, python-format
 msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay"
 msgstr ""
 
 #. name of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:194
+#: inkstitch-fonts-metadata.py:218
 msgid "Sacramarif"
 msgstr ""
 
 #. description of font in fonts/sacramarif
-#: inkstitch-fonts-metadata.py:196
+#: inkstitch-fonts-metadata.py:220
 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%"
 msgstr ""
 
 #. name of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:198
+#: inkstitch-fonts-metadata.py:222
 msgid "Ink/Stitch Small Font"
 msgstr ""
 
 #. description of font in fonts/small_font
-#: inkstitch-fonts-metadata.py:200
+#: inkstitch-fonts-metadata.py:224
 #, python-format
 msgid "A font suited for small characters.  The capital em is 0.2 inches wide at 100% scale.  Can be scaled up to 300%."
 msgstr ""
 
 #. name of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:202
+#: inkstitch-fonts-metadata.py:226
 msgid "Sortefax XL Initials"
 msgstr ""
 
 #. description of font in fonts/sortefaxXL
-#: inkstitch-fonts-metadata.py:204
+#: inkstitch-fonts-metadata.py:228
 msgid " Sortefax is a very large satin stitch Capital font of size 150mm.  It can be reduced down to 75% and enlarged up to 200%  It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; )  to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame"
 msgstr ""
 
 #. name of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:206
+#: inkstitch-fonts-metadata.py:230
 msgid "Sortefax Medium Initials"
 msgstr ""
 
 #. description of font in fonts/sortefax_medium
-#: inkstitch-fonts-metadata.py:208
+#: inkstitch-fonts-metadata.py:232
 msgid "Sortefax  Medium Initials is a  satin stitch Capital font of size 90 mm.  It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required"
 msgstr ""
 
 #. name of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:210
+#: inkstitch-fonts-metadata.py:234
 msgid "TT Directors"
 msgstr "TT Directors"
 
 #. description of font in fonts/tt_directors
-#: inkstitch-fonts-metadata.py:212
+#: inkstitch-fonts-metadata.py:236
 msgid "A font suited for directing"
 msgstr ""
 
 #. name of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:214
+#: inkstitch-fonts-metadata.py:238
 msgid "TT Masters"
 msgstr ""
 
 #. description of font in fonts/tt_masters
-#: inkstitch-fonts-metadata.py:216
+#: inkstitch-fonts-metadata.py:240
 msgid "A font suited for heavy typing :)"
 msgstr ""
 
 #. name of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:218
+#: inkstitch-fonts-metadata.py:242
 msgid "Violin Serif"
 msgstr ""
 
 #. description of font in fonts/violin_serif
-#: inkstitch-fonts-metadata.py:220
+#: inkstitch-fonts-metadata.py:244
 #, python-format
 msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches"
 msgstr ""