add stitch path optimization tools overview (as tutorial)

collections/_docs/de/004-010-stroke-tools.md

@@ -1,7 +1,7 @@
 ---
 title: "Werkzeuge: Linie"
 permalink: /de/docs/stroke-tools/
-last_modified_at: 2024-06-05
+last_modified_at: 2024-06-13
 toc: true
 ---
 ## Automatisch geführter Geradstich
@@ -141,6 +141,10 @@ Der Hauptunterschied zum `Automatisch geführtem Laufstich` ist, dass jede Linie
 
   Wendet den Wert für [Mehrfach-Geradstitch Anzahl der Wiederholungen](/de/docs/stitches/bean-stitch/) auf die Deckstiche an (nicht auf die Unterpfade).
 
+### Anfangs- und Endposition
+
+Redwork wird immer an der gleichen Stelle beginnen und enden. Dieser Punkt mit einem [Startbefehl für automatisch geführte Geradstiche](/de/docs/commands/#--start--und-endposition-für-automatisch-geführten-laufstich) festgelegt werden.
+
 
 ## Außenkontur
 

collections/_docs/en/004-010-stroke-tools.md

@@ -1,7 +1,7 @@
 ---
 title: "Tools: Stroke"
 permalink: /docs/stroke-tools/
-last_modified_at: 2024-06-05
+last_modified_at: 2024-06-13
 toc: true
 ---
 ## Autoroute Running Stitch
@@ -131,6 +131,9 @@ The main difference to `Autoroute Running Stitch` is that it ensures that paths
 
   Sets the [bean stitch number of repeats](/docs/stitches/bean-stitch/) for the top layer stitches (not on underpaths).
 
+### Start- and end position
+
+Redwork will always start and end at the same spot. However, you can define this spot with a [Auto-route start position command](/docs/commands/#--startingending-position-for-auto-route-of-running-stitch).
 
 ## Outline
 

collections/_docs/fr/004-010-stroke-tools.md

@@ -132,6 +132,10 @@ The main difference to `Autoroute Running Stitch` is that it ensures that paths
 
   Sets the [bean stitch number of repeats](/docs/stitches/bean-stitch/) for the top layer stitches (not on underpaths).
 
+### Start- and end position
+
+Redwork will always start and end at the same spot. However, you can define this spot with a [Auto-route start position command](/docs/commands/#--startingending-position-for-auto-route-of-running-stitch).
+
 
 ## Contour {#outline}
 {% include upcoming_release.html %}

collections/_tutorial/de/routing.md

@@ -0,0 +1,114 @@
+---
+title: Stichpad-Optimisierung
+permalink: /tutorials/routing/
+last_modified_at: 2024-06-12
+language: de
+excerpt: "Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task."
+image: /assets/images/tutorials/routing/routing.png
+
+tutorial-type:
+  - Text
+stitch-type:
+  - Füllung
+  - Kurvenfüllung
+  - Spiralfüllung
+  - Mäanderfüllung
+  - Satinsäule
+  - E-Stich
+  - S-Stich
+  - Geradstich
+  - Mehrfachgeradstich
+techniques:
+field-of-use:
+user-level: 
+
+toc: true
+---
+Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task.
+
+Embroidery is not only a setup of various elements printed on a piece of paper. When you create embroidery it is essential to
+
+* **Put elements into a logical Order**
+  * To avoid color changes where possible
+
+    It is still sometimes necessary to add an extra color change when either one color goes both - underneath AND on top of an other color
+    or when push and pull on the fabric during the stitch out demands us to do so.
+  * To avoid registration problems
+  * To avoid puckering
+* **Avoid jump stitches**
+
+  There should be no unneccessary jump stitches in your file. Do not just try to hide them by adding trim commands.
+  Trims produce chaos on the backside of the embroidery and slow down the machine quite a bit.
+
+Each file is individual and you are the designer who has to decide on how to route your stitch paths. But Ink/Stitch has some tools to assist you with the task.
+
+## General Routing Options
+
+### Order elements in selected order
+
+Moving the elements in the Layers and Objects panel up and down can be tiresome. Select the elements in desired stitch order and run the Ink/Stitch extension [Re-stack elements in selected order](/docs/edit/#re-stack-objects-in-order-of-selection) and have it doing the task.
+
+### Jump to Stroke
+
+After you've prepared the correct order of your elements and made sure where they are supposed to start and end,
+run the [jump to stroke](/docs/stroke-tools/#jump-to-stroke] to create a running stitch from the end position of the first element to the start position of the second element.
+
+You can then alter the stroke to be hidden under other elements. If the distance is short, you can also use it to make the connection stitch sink into the fabric while avoiding an additional jump.
+
+![Jump to stroke process](/assets/images/docs/jump_to_stroke.png)
+
+*1: Original 2: Jump to Stroke 3: Manually adjusted stroke*
+
+### Strokes routing options
+
+Strokes elements start at the beginning of the path and run til the end.
+
+### Make path directions visible
+
+In our [customize](/docs/customize/#enabling-path-outlines--direction) article we described, how you can setup Inkscape so that you can see the path direction right away and know where your stroke type stitches will begin and end.
+
+### Adapt stroke direction
+
+You now already made sure, that you can see the path direction. When you select a path and run `Path > Reverse`, Inkscape will reverse the path and the stitching goes the other way around. You may need this function a lot. We recommend to set a shortcut key on it. In the [customize section](/docs/customize/#shortcut-keys) we describe, how that works.
+
+### Params: adapt repeats
+
+When you need to start and end at the same spot of a stroke. You have several options to achieve it. In the [params dialog](/docs/params/), set the number for repeats to an odd number. If you don't want to do that (maybe because you have a bean stitch applied), duplicate the stroke and the direction of the copy.
+
+### Auto-route running stitch / Redwork
+
+When you have a bunch of strokes, it can be a tidious job to route them correctly.
+Ink/Stitch now has two tools for it. [Redwork](/docs/stroke-tools/#redwork) is definitely the one to prefer in most cases, since it will take care, that you'll receive exactly two passes for each line. You can set a start position. Redwork will always start and end at the same. If you do not wish that and want to define a start- and end position, then maybe [auto-route running stitch](/docs/stroke-tools/#autoroute-running-stitch) may be the better option for you.
+
+
+## Satin Routing Options
+
+Satin columns also run from the beginning of the rails to the end, just like a stroke path. Make sure they are no closed paths. Ink/Stitch can handle loops (closed paths), but it may end up in funny results and you cannot control the starting and enting point if there isn't a definite start and end position.
+
+### Auto-route satin
+
+Same as with the stroke type elements, Ink/Stitch has a [routing extension for satins](/docs/satin-tools/#auto-route-satin-columns). It may need some care though as it has one option (preserve oder of running stitches). If you enable it, it will do it's best to route your satins, but doesn't generate running stitches which could connect the satins underneath unrenedered columns. If you enable it, you do not have control of which parts of the satins are on top and which ones are underneath.
+
+Best option so far would be to prepare the order carefully (use the above mentioned extension to order elements) and run auto-route satin with the preserve order option checked. Then with all routed elements selected, run the above mentioned jump to stroke extension to remove all left over jumps. Push the running stitches into a good shape, so that they are hidden when possible.
+
+### Cut Satin
+
+When you cut a satin column for better routing, you may lose the param settings. So it's better to use the Ink/Stitch [extension to cut the satin](/docs/satin-tools/#cut-satin-column) and keep the previous setup.
+
+### Params: swap rails
+
+In the [params dialog](/docs/params/) it is possible to swap the rail on which the stitches will start and on which stitches will end. Be aware that all sided properties with be swapped, so you may need to adjust a few of them if you only want to swap the start position. A default satin column doesn't have any other sided property except for the start and end position.
+
+### Params: reverse rails
+
+In the [params dialog](/docs/params/) you can also switch the stitch direction of the whole satin.
+
+### Params: adapt centerline underlay repeats
+
+When you adapt the repeat value for the centerline underlay in the [params dialog](/docs/params/) to an odd value, the satin column will start and end at the same side. This can be an easy option to avoid manual running stitches for routing.
+
+## Fill Routing Options
+
+### Start- and Stop commands
+
+The start and end position of fill elements can be defined with [visual commands](/docs/commands/) (Fill stitch starting / ending position). If you set a lot of these commands the canvas can become a bit crowded. So it might be good to know, that commands will still work, even when invisible.

collections/_tutorial/en/routing.md

@@ -0,0 +1,114 @@
+---
+title: Stitch Path Optimisation
+permalink: /tutorials/routing/
+last_modified_at: 2024-06-13
+language: en
+excerpt: "Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task."
+image: /assets/images/tutorials/routing/routing.png
+
+tutorial-type:
+  - Text
+stitch-type:
+  - Fill stitch
+  - Guided Fill
+  - Circular Fill
+  - Meander Fill
+  - Satin
+  - E-Stitch
+  - S-Stitch
+  - Running Stitch
+  - Bean Stitch
+techniques:
+field-of-use:
+user-level: 
+
+toc: true
+---
+Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task.
+
+Embroidery is not only a setup of various elements printed on a piece of paper. When you create embroidery it is essential to
+
+* **Put elements into a logical Order**
+  * To avoid color changes where possible
+
+    It is still sometimes necessary to add an extra color change when either one color goes both - underneath AND on top of an other color
+    or when push and pull on the fabric during the stitch out demands us to do so.
+  * To avoid registration problems
+  * To avoid puckering
+* **Avoid jump stitches**
+
+  There should be no unneccessary jump stitches in your file. Do not just try to hide them by adding trim commands.
+  Trims produce chaos on the backside of the embroidery and slow down the machine quite a bit.
+
+Each file is individual and you are the designer who has to decide on how to route your stitch paths. But Ink/Stitch has some tools to assist you with the task.
+
+## General Routing Options
+
+### Order elements in selected order
+
+Moving the elements in the Layers and Objects panel up and down can be tiresome. Select the elements in desired stitch order and run the Ink/Stitch extension [Re-stack elements in selected order](/docs/edit/#re-stack-objects-in-order-of-selection) and have it doing the task.
+
+### Jump to Stroke
+
+After you've prepared the correct order of your elements and made sure where they are supposed to start and end,
+run the [jump to stroke](/docs/stroke-tools/#jump-to-stroke] to create a running stitch from the end position of the first element to the start position of the second element.
+
+You can then alter the stroke to be hidden under other elements. If the distance is short, you can also use it to make the connection stitch sink into the fabric while avoiding an additional jump.
+
+![Jump to stroke process](/assets/images/docs/jump_to_stroke.png)
+
+*1: Original 2: Jump to Stroke 3: Manually adjusted stroke*
+
+### Strokes routing options
+
+Strokes elements start at the beginning of the path and run til the end.
+
+### Make path directions visible
+
+In our [customize](/docs/customize/#enabling-path-outlines--direction) article we described, how you can setup Inkscape so that you can see the path direction right away and know where your stroke type stitches will begin and end.
+
+### Adapt stroke direction
+
+You now already made sure, that you can see the path direction. When you select a path and run `Path > Reverse`, Inkscape will reverse the path and the stitching goes the other way around. You may need this function a lot. We recommend to set a shortcut key on it. In the [customize section](/docs/customize/#shortcut-keys) we describe, how that works.
+
+### Params: adapt repeats
+
+When you need to start and end at the same spot of a stroke. You have several options to achieve it. In the [params dialog](/docs/params/), set the number for repeats to an odd number. If you don't want to do that (maybe because you have a bean stitch applied), duplicate the stroke and the direction of the copy.
+
+### Auto-route running stitch / Redwork
+
+When you have a bunch of strokes, it can be a tidious job to route them correctly.
+Ink/Stitch now has two tools for it. [Redwork](/docs/stroke-tools/#redwork) is definitely the one to prefer in most cases, since it will take care, that you'll receive exactly two passes for each line. You can set a start position. Redwork will always start and end at the same. If you do not wish that and want to define a start- and end position, then maybe [auto-route running stitch](/docs/stroke-tools/#autoroute-running-stitch) may be the better option for you.
+
+
+## Satin Routing Options
+
+Satin columns also run from the beginning of the rails to the end, just like a stroke path. Make sure they are no closed paths. Ink/Stitch can handle loops (closed paths), but it may end up in funny results and you cannot control the starting and enting point if there isn't a definite start and end position.
+
+### Auto-route satin
+
+Same as with the stroke type elements, Ink/Stitch has a [routing extension for satins](/docs/satin-tools/#auto-route-satin-columns). It may need some care though as it has one option (preserve oder of running stitches). If you enable it, it will do it's best to route your satins, but doesn't generate running stitches which could connect the satins underneath unrenedered columns. If you enable it, you do not have control of which parts of the satins are on top and which ones are underneath.
+
+Best option so far would be to prepare the order carefully (use the above mentioned extension to order elements) and run auto-route satin with the preserve order option checked. Then with all routed elements selected, run the above mentioned jump to stroke extension to remove all left over jumps. Push the running stitches into a good shape, so that they are hidden when possible.
+
+### Cut Satin
+
+When you cut a satin column for better routing, you may lose the param settings. So it's better to use the Ink/Stitch [extension to cut the satin](/docs/satin-tools/#cut-satin-column) and keep the previous setup.
+
+### Params: swap rails
+
+In the [params dialog](/docs/params/) it is possible to swap the rail on which the stitches will start and on which stitches will end. Be aware that all sided properties with be swapped, so you may need to adjust a few of them if you only want to swap the start position. A default satin column doesn't have any other sided property except for the start and end position.
+
+### Params: reverse rails
+
+In the [params dialog](/docs/params/) you can also switch the stitch direction of the whole satin.
+
+### Params: adapt centerline underlay repeats
+
+When you adapt the repeat value for the centerline underlay in the [params dialog](/docs/params/) to an odd value, the satin column will start and end at the same side. This can be an easy option to avoid manual running stitches for routing.
+
+## Fill Routing Options
+
+### Start- and Stop commands
+
+The start and end position of fill elements can be defined with [visual commands](/docs/commands/) (Fill stitch starting / ending position). If you set a lot of these commands the canvas can become a bit crowded. So it might be good to know, that commands will still work, even when invisible.

collections/_tutorial/fr/routing.md

@@ -0,0 +1,114 @@
+---
+title: Stitch Path Optimisation
+permalink: /tutorials/routing/
+last_modified_at: 2024-06-12
+language: fr
+excerpt: "Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task."
+image: /assets/images/tutorials/routing/routing.png
+
+tutorial-type:
+  - Text
+stitch-type:
+  - Fill stitch
+  - Guided Fill
+  - Circular Fill
+  - Meander Fill
+  - Satin
+  - E-Stitch
+  - S-Stitch
+  - Running Stitch
+  - Bean Stitch
+techniques:
+field-of-use:
+user-level: 
+
+toc: true
+---
+Optimising the stitch path is one of the most important subjects in embroidery. Learn how Ink/Stitch can assist you with the task.
+
+Embroidery is not only a setup of various elements printed on a piece of paper. When you create embroidery it is essential to
+
+* **Put elements into a logical Order**
+  * To avoid color changes where possible
+
+    It is still sometimes necessary to add an extra color change when either one color goes both - underneath AND on top of an other color
+    or when push and pull on the fabric during the stitch out demands us to do so.
+  * To avoid registration problems
+  * To avoid puckering
+* **Avoid jump stitches**
+
+  There should be no unneccessary jump stitches in your file. Do not just try to hide them by adding trim commands.
+  Trims produce chaos on the backside of the embroidery and slow down the machine quite a bit.
+
+Each file is individual and you are the designer who has to decide on how to route your stitch paths. But Ink/Stitch has some tools to assist you with the task.
+
+## General Routing Options
+
+### Order elements in selected order
+
+Moving the elements in the Layers and Objects panel up and down can be tiresome. Select the elements in desired stitch order and run the Ink/Stitch extension [Re-stack elements in selected order](/docs/edit/#re-stack-objects-in-order-of-selection) and have it doing the task.
+
+### Jump to Stroke
+
+After you've prepared the correct order of your elements and made sure where they are supposed to start and end,
+run the [jump to stroke](/docs/stroke-tools/#jump-to-stroke] to create a running stitch from the end position of the first element to the start position of the second element.
+
+You can then alter the stroke to be hidden under other elements. If the distance is short, you can also use it to make the connection stitch sink into the fabric while avoiding an additional jump.
+
+![Jump to stroke process](/assets/images/docs/jump_to_stroke.png)
+
+*1: Original 2: Jump to Stroke 3: Manually adjusted stroke*
+
+### Strokes routing options
+
+Strokes elements start at the beginning of the path and run til the end.
+
+### Make path directions visible
+
+In our [customize](/docs/customize/#enabling-path-outlines--direction) article we described, how you can setup Inkscape so that you can see the path direction right away and know where your stroke type stitches will begin and end.
+
+### Adapt stroke direction
+
+You now already made sure, that you can see the path direction. When you select a path and run `Path > Reverse`, Inkscape will reverse the path and the stitching goes the other way around. You may need this function a lot. We recommend to set a shortcut key on it. In the [customize section](/docs/customize/#shortcut-keys) we describe, how that works.
+
+### Params: adapt repeats
+
+When you need to start and end at the same spot of a stroke. You have several options to achieve it. In the [params dialog](/docs/params/), set the number for repeats to an odd number. If you don't want to do that (maybe because you have a bean stitch applied), duplicate the stroke and the direction of the copy.
+
+### Auto-route running stitch / Redwork
+
+When you have a bunch of strokes, it can be a tidious job to route them correctly.
+Ink/Stitch now has two tools for it. [Redwork](/docs/stroke-tools/#redwork) is definitely the one to prefer in most cases, since it will take care, that you'll receive exactly two passes for each line. You can set a start position. Redwork will always start and end at the same. If you do not wish that and want to define a start- and end position, then maybe [auto-route running stitch](/docs/stroke-tools/#autoroute-running-stitch) may be the better option for you.
+
+
+## Satin Routing Options
+
+Satin columns also run from the beginning of the rails to the end, just like a stroke path. Make sure they are no closed paths. Ink/Stitch can handle loops (closed paths), but it may end up in funny results and you cannot control the starting and enting point if there isn't a definite start and end position.
+
+### Auto-route satin
+
+Same as with the stroke type elements, Ink/Stitch has a [routing extension for satins](/docs/satin-tools/#auto-route-satin-columns). It may need some care though as it has one option (preserve oder of running stitches). If you enable it, it will do it's best to route your satins, but doesn't generate running stitches which could connect the satins underneath unrenedered columns. If you enable it, you do not have control of which parts of the satins are on top and which ones are underneath.
+
+Best option so far would be to prepare the order carefully (use the above mentioned extension to order elements) and run auto-route satin with the preserve order option checked. Then with all routed elements selected, run the above mentioned jump to stroke extension to remove all left over jumps. Push the running stitches into a good shape, so that they are hidden when possible.
+
+### Cut Satin
+
+When you cut a satin column for better routing, you may lose the param settings. So it's better to use the Ink/Stitch [extension to cut the satin](/docs/satin-tools/#cut-satin-column) and keep the previous setup.
+
+### Params: swap rails
+
+In the [params dialog](/docs/params/) it is possible to swap the rail on which the stitches will start and on which stitches will end. Be aware that all sided properties with be swapped, so you may need to adjust a few of them if you only want to swap the start position. A default satin column doesn't have any other sided property except for the start and end position.
+
+### Params: reverse rails
+
+In the [params dialog](/docs/params/) you can also switch the stitch direction of the whole satin.
+
+### Params: adapt centerline underlay repeats
+
+When you adapt the repeat value for the centerline underlay in the [params dialog](/docs/params/) to an odd value, the satin column will start and end at the same side. This can be an easy option to avoid manual running stitches for routing.
+
+## Fill Routing Options
+
+### Start- and Stop commands
+
+The start and end position of fill elements can be defined with [visual commands](/docs/commands/) (Fill stitch starting / ending position). If you set a lot of these commands the canvas can become a bit crowded. So it might be good to know, that commands will still work, even when invisible.