inkstitch/lib/stitches/__init__.py

from .auto_fill import auto_fill
from .fill import legacy_fill
from .running_stitch import *

# Can't put this here because we get a circular import :(
#from auto_satin import auto_satin
Update for Inkscape 1.0 (#880) * update for inkscape 1.0 * add about extension * Build improvements for the inkscape1.0 branch (#985) * zip: export real svg not stitch plan * #411 and #726 * Tools for Font Creators (#1018) * ignore very small holes in fills * remove embroider (#1026) * auto_fill: ignore shrink_or_grow if result is empty (#589) * break apart: do not ignore small fills Co-authored-by: Hagen Fritsch <rumpeltux-github@irgendwo.org> Co-authored-by: Lex Neva <github.com@lexneva.name> 2021-03-04 17:40:53 +00:00			`from .auto_fill import auto_fill`
			`from .fill import legacy_fill`
			`from .running_stitch import *`
new extension: Auto-Route Satin Columns (#330) video demo: https://www.youtube.com/watch?v=tbghtqziB1g This branch adds a new extension, Auto-Route Satin Columns, implementing #214! This is a huge new feature that opens the door wide for exciting stuff like lettering (#142). To use it, select some satin columns and run the extension. After a few seconds, it will replace your satins with a new set with a logical stitching order. Under-pathing and jump-stitches will be added as necessary, and satins will be broken to facilitate jumps. The resulting satins will retain all of the parameters you had set on the original satins, including underlay, zig-zag spacing, etc. By default, it will choose the left-most extreme as the starting point and the right-most extreme as the ending point (even if these occur partway through a satin such as the left edge of a letter "o"). You can override this by attaching the new "Auto-route satin stitch starting/ending position" commands. There's also an option to add trims instead of jump stitches. Any jump stitch over 1mm is trimmed. I might make this configurable in the future but in my tests it seems to do a good job. Trim commands are added to the SVG, so it's easy enough to modify/delete as you see fit. 2018-10-30 23:43:21 +00:00
			`# Can't put this here because we get a circular import :(`
			`#from auto_satin import auto_satin`