kopia lustrzana https://github.com/projecthorus/horusdemodlib
95 wiersze
2.8 KiB
Bash
Executable File
95 wiersze
2.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
#
|
|
# Horus Binary RTLSDR Helper Script
|
|
#
|
|
# Uses rtl_fm to receive a chunk of spectrum, and passes it into horus_demod.
|
|
#
|
|
|
|
|
|
# Change directory to the horusdemodlib directory.
|
|
# If running as a different user, you will need to change this line
|
|
cd /home/pi/horusdemodlib/
|
|
|
|
|
|
# Receive *centre* frequency, in Hz
|
|
# Note: The SDR will be tuned to RXBANDWIDTH/2 below this frequency.
|
|
RXFREQ=434200000
|
|
|
|
# Receiver Gain. Set this to 0 to use automatic gain control, otherwise if running a
|
|
# preamplifier, you may want to experiment with different gain settings to optimize
|
|
# your receiver setup.
|
|
# You can find what gain range is valid for your RTLSDR by running: rtl_test
|
|
GAIN=0
|
|
|
|
# Bias Tee Enable (1) or Disable (0)
|
|
BIAS=0
|
|
|
|
# Receiver PPM offset
|
|
PPM=0
|
|
|
|
# Frequency estimator bandwidth. The wider the bandwidth, the more drift and frequency error the modem can tolerate,
|
|
# but the higher the chance that the modem will lock on to a strong spurious signal.
|
|
# Note: The SDR will be tuned to RXFREQ-RXBANDWIDTH/2, and the estimator set to look at 0-RXBANDWIDTH Hz.
|
|
RXBANDWIDTH=10000
|
|
|
|
# Enable (1) or disable (0) modem statistics output.
|
|
# If enabled, modem statistics are written to stats.txt, and can be observed
|
|
# during decoding by running: tail -f stats.txt | python fskstats.py
|
|
STATS_OUTPUT=0
|
|
|
|
|
|
# Check that the horus_demod decoder has been compiled.
|
|
DECODER=./build/src/horus_demod
|
|
if [ -f "$DECODER" ]; then
|
|
echo "Found horus_demod."
|
|
else
|
|
echo "ERROR - $DECODER does not exist - have you compiled it yet?"
|
|
exit 1
|
|
fi
|
|
|
|
# Check that bc is available on the system path.
|
|
if echo "1+1" | bc > /dev/null; then
|
|
echo "Found bc."
|
|
else
|
|
echo "ERROR - Cannot find bc - Did you install it?"
|
|
exit 1
|
|
fi
|
|
|
|
# Use a local venv if it exists
|
|
VENV_DIR=venv
|
|
if [ -d "$VENV_DIR" ]; then
|
|
echo "Entering venv."
|
|
source $VENV_DIR/bin/activate
|
|
fi
|
|
|
|
# Calculate the SDR tuning frequency
|
|
SDR_RX_FREQ=$(echo "$RXFREQ - $RXBANDWIDTH/2 - 1000" | bc)
|
|
|
|
# Calculate the frequency estimator limits
|
|
FSK_LOWER=1000
|
|
FSK_UPPER=$(echo "$FSK_LOWER + $RXBANDWIDTH" | bc)
|
|
|
|
echo "Using SDR Centre Frequency: $SDR_RX_FREQ Hz."
|
|
echo "Using FSK estimation range: $FSK_LOWER - $FSK_UPPER Hz"
|
|
|
|
BIAS_SETTING=""
|
|
|
|
if [ "$BIAS" = "1" ]; then
|
|
echo "Enabling Bias Tee."
|
|
BIAS_SETTING=" -T"
|
|
fi
|
|
|
|
GAIN_SETTING=""
|
|
if [ "$GAIN" = "0" ]; then
|
|
echo "Using AGC."
|
|
GAIN_SETTING=""
|
|
else
|
|
echo "Using Manual Gain"
|
|
GAIN_SETTING=" -g $GAIN"
|
|
fi
|
|
|
|
# Start the receive chain.
|
|
# Note that we now pass in the SDR centre frequency ($SDR_RX_FREQ) and 'target' signal frequency ($RXFREQ)
|
|
# to enable providing additional metadata to Habitat / Sondehub.
|
|
rtl_fm -M raw -F9 -s 48000 -p $PPM $GAIN_SETTING$BIAS_SETTING -f $SDR_RX_FREQ | $DECODER -q --stats=5 -g -m binary --fsk_lower=$FSK_LOWER --fsk_upper=$FSK_UPPER - - | python -m horusdemodlib.uploader --freq_hz $SDR_RX_FREQ --freq_target_hz $RXFREQ $@
|