kopia lustrzana https://github.com/gnea/grbl
104 wiersze
4.4 KiB
C
104 wiersze
4.4 KiB
C
/*
|
|
gcode.h - rs274/ngc parser.
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2014 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef gcode_h
|
|
#define gcode_h
|
|
#include <avr/io.h>
|
|
#include "nuts_bolts.h"
|
|
|
|
// Define modal group internal numbers for checking multiple command violations and tracking the
|
|
// type of command that is called in the block. A modal group is a group of g-code commands that are
|
|
// mutually exclusive, or cannot exist on the same line, because they each toggle a state or execute
|
|
// a unique motion. These are defined in the NIST RS274-NGC v3 g-code standard, available online,
|
|
// and are similar/identical to other g-code interpreters by manufacturers (Haas,Fanuc,Mazak,etc).
|
|
#define MODAL_GROUP_NONE 0
|
|
#define MODAL_GROUP_0 1 // [G4,G10,G28,G30,G53,G92,G92.1] Non-modal
|
|
#define MODAL_GROUP_1 2 // [G0,G1,G2,G3,G80] Motion
|
|
#define MODAL_GROUP_2 3 // [G17,G18,G19] Plane selection
|
|
#define MODAL_GROUP_3 4 // [G90,G91] Distance mode
|
|
#define MODAL_GROUP_4 5 // [M0,M1,M2,M30] Stopping
|
|
#define MODAL_GROUP_5 6 // [G93,G94] Feed rate mode
|
|
#define MODAL_GROUP_6 7 // [G20,G21] Units
|
|
#define MODAL_GROUP_7 8 // [M3,M4,M5] Spindle turning
|
|
#define MODAL_GROUP_8 9 // [M7,M8,M9] Coolant control
|
|
#define MODAL_GROUP_12 10 // [G54,G55,G56,G57,G58,G59] Coordinate system selection
|
|
|
|
// Define command actions for within execution-type modal groups (motion, stopping, non-modal). Used
|
|
// internally by the parser to know which command to execute.
|
|
#define MOTION_MODE_SEEK 0 // G0
|
|
#define MOTION_MODE_LINEAR 1 // G1
|
|
#define MOTION_MODE_CW_ARC 2 // G2
|
|
#define MOTION_MODE_CCW_ARC 3 // G3
|
|
#define MOTION_MODE_CANCEL 4 // G80
|
|
|
|
#define PROGRAM_FLOW_RUNNING 0
|
|
#define PROGRAM_FLOW_PAUSED 1 // M0, M1
|
|
#define PROGRAM_FLOW_COMPLETED 2 // M2, M30
|
|
|
|
#define NON_MODAL_NONE 0
|
|
#define NON_MODAL_DWELL 1 // G4
|
|
#define NON_MODAL_SET_COORDINATE_DATA 2 // G10
|
|
#define NON_MODAL_GO_HOME_0 3 // G28
|
|
#define NON_MODAL_SET_HOME_0 4 // G28.1
|
|
#define NON_MODAL_GO_HOME_1 5 // G30
|
|
#define NON_MODAL_SET_HOME_1 6 // G30.1
|
|
#define NON_MODAL_SET_COORDINATE_OFFSET 7 // G92
|
|
#define NON_MODAL_RESET_COORDINATE_OFFSET 8 //G92.1
|
|
|
|
typedef struct {
|
|
uint8_t status_code; // Parser status for current block
|
|
uint8_t motion_mode; // {G0, G1, G2, G3, G80}
|
|
uint8_t inverse_feed_rate_mode; // {G93, G94}
|
|
uint8_t inches_mode; // 0 = millimeter mode, 1 = inches mode {G20, G21}
|
|
uint8_t absolute_mode; // 0 = relative motion, 1 = absolute motion {G90, G91}
|
|
uint8_t program_flow; // {M0, M1, M2, M30}
|
|
int8_t spindle_direction; // 1 = CW, -1 = CCW, 0 = Stop {M3, M4, M5}
|
|
uint8_t coolant_mode; // 0 = Disable, 1 = Flood Enable {M8, M9}
|
|
float feed_rate; // Millimeters/min
|
|
float position[N_AXIS]; // Where the interpreter considers the tool to be at this point in the code
|
|
uint8_t tool;
|
|
uint16_t spindle_speed; // RPM
|
|
uint8_t plane_axis_0,
|
|
plane_axis_1,
|
|
plane_axis_2; // The axes of the selected plane
|
|
uint8_t coord_select; // Active work coordinate system number. Default: 0=G54.
|
|
float coord_system[N_AXIS]; // Current work coordinate system (G54+). Stores offset from absolute machine
|
|
// position in mm. Loaded from EEPROM when called.
|
|
float coord_offset[N_AXIS]; // Retains the G92 coordinate offset (work coordinates) relative to
|
|
// machine zero in mm. Non-persistent. Cleared upon reset and boot.
|
|
|
|
float arc_radius;
|
|
float arc_offset[N_AXIS];
|
|
|
|
} parser_state_t;
|
|
extern parser_state_t gc;
|
|
|
|
// Initialize the parser
|
|
void gc_init();
|
|
|
|
// Execute one block of rs275/ngc/g-code
|
|
uint8_t gc_execute_line(char *line);
|
|
|
|
// Set g-code parser position. Input in steps.
|
|
void gc_sync_position();
|
|
|
|
#endif
|