Wykres commitów

13 Commity (2168bb1cf97703206e549b3ca2694db96289f77f)

Autor SHA1 Wiadomość Data
Sonny Jeon 50fbc6e297 Refactoring and lots of bug fixes. Updated homing cycle.
WARNING: There are still some bugs to be worked out. Please use caution
if you test this firmware.

- Feed holds work much better, but there are still some failure
conditions that need to be worked out. This is the being worked on
currently and a fix is planned to be pushed next.

- Homing cycle refactoring: Slight adjustment of the homing cycle to
allow for limit pins to be shared by different axes, as long as the
shared limit pins are not homed on the same cycle. Also, removed the
LOCATE_CYCLE portion of the homing cycle configuration. It was
redundant.

- Limit pin sharing: (See above). To clear up one or two limit pins for
other IO, limit pins can now be shared. For example, the Z-limit can be
shared with either X or Y limit pins, because it’s on a separate homing
cycle. Hard limit will still work exactly as before.

- Spindle pin output fixed. The pins weren’t getting initialized
correctly.

- Fixed a cycle issue where streaming was working almost like a single
block mode. This was caused by a problem with the spindle_run() and
coolant_run() commands and issuing an unintended planner buffer sync.

- Refactored the cycle_start, feed_hold, and other runtime routines
into the runtime command module, where they should be handled here
only. These were redundant.

- Moved some function calls around into more appropriate source code
modules.

- Fixed the reporting of spindle state.
2014-02-09 10:46:34 -07:00
Sonny Jeon cc9afdc195 Lots of re-organization and cleaning-up. Some bug fixes.
- Added a new source and header file called system. These files contain
the system commands and variables, as well as all of the system headers
and standard libraries Grbl uses. Centralizing some of the code.

- Re-organized the include headers throughout the source code.

- ENABLE_M7 define was missing from config.h. Now there.

- SPINDLE_MAX_RPM and SPINDLE_MIN_RPM now defined in config.h. No
uncommenting to prevent user issues. Minimum spindle RPM now provides
the lower, near 0V, scale adjustment, i.e. some spindles can go really
slow so why use up our 256 voltage bins for them?

- Remove some persistent variables from coolant and spindle control.
They were redundant.

- Removed a VARIABLE_SPINDLE define in cpu_map.h that shouldn’t have
been there.

- Changed the DEFAULT_ARC_TOLERANCE to 0.002mm to improve arc tracing.
Before we had issues with performance, no longer.

- Fixed a bug with the hard limits and the software debounce feature
enabled. The invert limit pin setting wasn’t honored.

- Fixed a bug with the homing direction mask. Now is like it used to
be. At least for now.

- Re-organized main.c to serve as only as the reset/initialization
routine. Makes things a little bit clearer in terms of execution
procedures.

- Re-organized protocol.c as the overall master control unit for
execution procedures. Not quite there yet, but starting to make a
little more sense in how things are run.

- Removed updating of old settings records. So many new settings have
been added that it’s not worth adding the code to migrate old user
settings.

- Tweaked spindle_control.c a bit and made it more clear and consistent
with other parts of Grbl.

- Tweaked the stepper disable bit code in stepper.c. Requires less
flash memory.
2014-01-10 20:22:10 -07:00
Sonny Jeon f10bad43b2 Minor bug fixes: Homing travel calculations. Cycle resuming after spindle and dwell commands.
- Homing travel calculations fixed. It was computing the min travel
rather than max.

- Auto-start disable and pausing after spindle or dwell commands.
Related to plan_synchronize() function call. Now fixed, but still need
to work on the system state.

- Pushed a fix to make this branch more Arduino IDE compatible. Removed
extern call in nuts_bolts.c

- Updated the stepper configuration option of enabling or disabling the
new Adaptive Multi-Axis Step Smoothing Algorithm. Now works either way.

- Updated some copyright info.
2013-12-30 22:02:05 -07:00
Sonny Jeon 47cd40c8dc Incomplete push but working. Lots more stuff. More to come.
- NEW! An active multi-axis step smoothing algorithm that automatically
adjusts dependent on step frequency. This solves the long standing
issue to aliasing when moving with multiple axes. Similar in scheme to
Smoothieware, but more advanced in ensuring a more consistent CPU
overhead throughout all frequencies while maintaining step exactness.

- Switched from Timer2 to Timer0 for the Step Port Reset Interrupt.
Mainly to free up hardware PWM pins.

- Seperated the direction and step pin assignments, so we can now move
them to seperate ports. This means that we can more easily support 4+
axes in the future.

- Added a setting for inverting the limit pins, as so many users have
request. Better late than never.

- Bug fix related to EEPROM calls when in cycle. The EEPROM would kill
the stepper motion. Now protocol mandates that the system be either in
IDLE or ALARM to access or change any settings.

- Bug fix related to resuming the cycle after a spindle or dwell
command if auto start has been disabled. This fix is somewhat temporary
or more of a patch. Doesn’t work with a straight call-response
streaming protocol, but works fine with serial buffer pre-filling
streaming that most clients use.

- Renamed the pin_map.h to cpu_map.h to more accurately describe what
the file is.

- Pushed an auto start bug fix upon re-initialization.

- Much more polishing to do!
2013-12-30 18:44:46 -07:00
Sonny Jeon 903b462b2e Merge branch 'dev' of https://github.com/grbl/grbl into dev
Conflicts:
	limits.c
2013-12-29 20:34:51 -07:00
Sonny Jeon 4f9bcde40e Merge branch 'dev_2' into dev
Conflicts:
README.md
gcode.c
motion_control.c
planner.c
planner.h
protocol.c
report.c
settings.c
settings.h
stepper.c
stepper.h
2013-10-29 19:10:39 -06:00
Sonny Jeon bba633101a G28/G30 post move bug fix. Altered file permissions. 2012-11-25 22:02:33 -07:00
Sonny Jeon 00fd09189d Housekeeping.
- Added some more notes to config.h.

- Added the ability to override some of the #defines around Grbl in
config.h, like planner buffer size, line buffer size, serial
send/receive buffers. Mainly to centralize the configurations to be
able to port to different microcontrollers later.
2012-11-08 19:23:47 -07:00
Sonny Jeon 9cabc915ef Runtime command pinned out! Re-organized coolant pins.
- Pinned out cycle start(A2), feed hold(A1), and reset(A0) runtime
commands. These pins are held high with the internal pull-up resistor
enabled. All you have to do is connect a normally-open switch to the
pin and ground. That's it.

- Moved the coolant control pins to A3 (and the optional mist control
to A4).

- Moved all of the MASK defines into the config.h file to centralize
them.
2012-11-04 10:48:57 -07:00
Sonny Jeon 4c711a4af7 New startup script setting. New dry run, check gcode switches. New system state variable. Lots of reorganizing.
(All v0.8 features installed. Still likely buggy, but now thourough
testing will need to start to squash them all. As soon as we're done,
this will be pushed to master and v0.9 development will be started.
Please report ANY issues to us so we can get this rolled out ASAP.)

- User startup script! A user can now save one (up to 5 as compile-time
option) block of g-code in EEPROM memory. This will be run everytime
Grbl resets. Mainly to be used as a way to set your preferences, like
G21, G54, etc.

- New dry run and check g-code switches. Dry run moves ALL motions at
rapids rate ignoring spindle, coolant, and dwell commands. For rapid
physical proofing of your code. The check g-code switch ignores all
motion and provides the user a way to check if there are any errors in
their program that Grbl may not like.

- Program restart! (sort of). Program restart is typically an advanced
feature that allows users to restart a program mid-stream. The check
g-code switch can perform this feature by enabling the switch at the
start of the program, and disabling it at the desired point with some
minimal changes.

- New system state variable. This state variable tracks all of the
different state processes that Grbl performs, i.e. cycle start, feed
hold, homing, etc. This is mainly for making managing of these task
easier and more clear.

- Position lost state variable. Only when homing is enabled, Grbl will
refuse to move until homing is completed and position is known. This is
mainly for safety. Otherwise, it will let users fend for themselves.

- Moved the default settings defines into config.h. The plan is to
eventually create a set of config.h's for particular as-built machines
to help users from doing it themselves.

- Moved around misc defines into .h files. And lots of other little
things.
2012-11-03 11:32:23 -06:00
Sonny Jeon 34f6d2eb4b Minor updates, improvements, and bug fixes.
- Allowed status_message function to be called by others. This is to
centralize all feedback into protocol.c.

- Fixed a bug where line number words 'N' were causing the parser to
error out.

- Allowed homing routine feed rates to move slower than the
MINIMUM_STEP_RATE parameter in config.h.

- Homing performs idle lock at the end of the routine.

- Stepper idle lock time will now not disable the steppers when the
value is set at 255. This is accomodate users who prefer to keep their
axes enabled at all times.

- Moved some defines around to where they need to be.
2012-10-13 13:11:43 -06:00
Sonny Jeon 1720484d76 No changes. Github commit bug. 2012-06-27 07:06:24 -06:00
Simen Svale Skogsrud d5d6298de3 added support for limit switches and homing action 2011-02-20 00:29:56 +01:00