Hatch fill command.evilmadscientist.eggbot_hatch org.inkscape.output.svg.inkscape eggbot_hatch.py An extension to fill all (or selected) closed figures in your drawing with paths consisting of back-and-forth hatch lines. 3.0 px mm inch 45 false true 3.0 true 0.5 2.0 Hatch spacing is the distance between hatch lines, measured in selected units. Hatch angle is in degrees from horizontal; e.g., 90 for vertical. The Crosshatch option will add a second set of hatches, perpendicular to the first. The Connect Nearby Ends option will join nearby line ends with a smooth curve, giving a different appearance and reducing the number of pen lifts when using robotic tools like pen plotters. The Range parameter sets the distance (in hatch spacing) over which end connections may be made. Large values may result in hatches where you don't want them. The Inset Fill from Edges option allows you to hold back the hatches away from the edge of your original object. This can allow you to more reliably "color inside the lines". The Tolerance parameter affects how precisely the hatches try to fill the input paths. Hatches will have the same stroke color and width as the original object. When filling more than one object, the hatches will be grouped with their original (filled) objects. v2.4.3. Copyright 2022, Evil Mad Scientist all