Fix for issue #163: Spelling of the word parameter fixed across all sources

EBB_firmware/Microchip/Include/USB/usb_common.h

@@ -468,7 +468,7 @@ stalled (ie. bit 0 = EP0, bit 1 = EP1, etc.)
         USBInitialize must have been called to initialize the USB SW
         Stack.
         
-    Paramters:
+    Parameters:
         USB_EVENT event   - Identifies the bus event that occured
         void *data        - Pointer to event-specific data
         unsigned int size - Size of the event-specific data

EBB_firmware/Microchip/Include/USB/usb_device.h

@@ -1601,7 +1601,7 @@ USB_HANDLE USBGetNextHandle(BYTE ep_num, BYTE ep_dir);
     PreCondition:
         None
         
-    Paramters:
+    Parameters:
         options - the various options that you want
                   when sending the control data. Options are:
                        USB_EP0_ROM

EBB_firmware/Microchip/Include/USB/usb_function_ccid.h

@@ -182,7 +182,7 @@ extern unsigned char usbCcidBulkInEndpoint[USB_EP_SIZE];	//User application buff
     PreCondition:
         usbCcidBulkInTrfState must be in the USB_CCID_BULK_IN_READY state.
         
-    Paramters:
+    Parameters:
         pDdata  : Pointer to the starting location of data bytes
         len     : Number of bytes to be transferred
         

EBB_firmware/Microchip/Include/USB/usb_function_cdc.h

@@ -511,7 +511,7 @@
         The USB stack should have reached the CONFIGURED_STATE prior
         to calling this API function for the first time.
         
-    Paramters:
+    Parameters:
         pDdata  : Pointer to the starting location of data bytes
         len     : Number of bytes to be transferred
         

EBB_firmware/Microchip/Include/USB/usb_hal.h

@@ -630,7 +630,7 @@ BOOL USBHALSetEpConfiguration ( BYTE ep_num, UINT16 max_pkt_size, UINT16 flags )
     Precondition:
         The system has been initialized.
         
-    Paramters:
+    Parameters:
         flags -  Initialization flags
         
     Return Values:

EBB_firmware/Microchip/USB/usb_hal_local.h

@@ -560,7 +560,7 @@ typedef union
     PreCondition:
         None
 
-    Paramters:
+    Parameters:
         errors - Bitmap of the error status bits (caller sets the bets
                  it wishes to clear).
 

EBB_firmware/app-SimpleServo.X/source/UBW.c

@@ -1057,11 +1057,11 @@ void ProcessIO(void)
 		}
 		if (bittst (error_byte, kERROR_BYTE_PARAMETER_OUTSIDE_LIMIT))
 		{
-			printf ((far rom char *)"!6 Err: Invalid paramter value\r\n");
+			printf ((far rom char *)"!6 Err: Invalid parameter value\r\n");
 		}
 		if (bittst (error_byte, kERROR_BYTE_EXTRA_CHARACTERS))
 		{
-			printf ((far rom char *)"!7 Err: Extra parmater\r\n");
+			printf ((far rom char *)"!7 Err: Extra parameter\r\n");
 		}
 		error_byte = 0;
 	}
@@ -1536,8 +1536,8 @@ void parse_R_packet(void)
 }
 
 // CU is "Configure UBW" and controls system-wide configruation values
-// "CU,<parameter_number>,<paramter_value><CR>"
-// <paramter_number>	<parameter_value>
+// "CU,<parameter_number>,<parameter_value><CR>"
+// <parameter_number>	<parameter_value>
 // 1					{1|0} turns on or off the 'ack' ("OK" at end of packets)
 void parse_CU_packet(void)
 {
@@ -2851,7 +2851,7 @@ void parse_PC_packet (void)
 // interval.
 //
 // Usage:
-// PG,1<CR>		Start pulses, or load latest set of paramters and use them
+// PG,1<CR>		Start pulses, or load latest set of parameters and use them
 // PG,0<CR>		Stop pulses
 void parse_PG_packet (void)
 {

EBB_firmware/app-SimpleServo.X/source/ebb.c

@@ -40,7 +40,7 @@
 // 2.1.1 11/21/10- Removed Microchip USB stack v2.7, replaced it with v2.8 from MAL 2010_10_19,
 //					Also using generic Microchip folder now rather than re-named one (simpler to update)
 //				   Updated code in main.c (and others) to match updates from latest MAL CDC example
-// 2.1.1cTest1 01/17/11 - Added third paramter to SP command to use any PortB pin for servo output
+// 2.1.1cTest1 01/17/11 - Added third parameter to SP command to use any PortB pin for servo output
 //                 For this version only - used PortB2 as standard servo output
 // 2.1.1d 02/11/11 - Reverted back to RB1 for servo output
 //                 - Updated check_and_send_TX_data() to allow unlimited data to go out without overrunning

EBB_firmware/app.X/source/UBW.c

@@ -1036,11 +1036,11 @@ void ProcessIO(void)
 		}
 		if (bittst (error_byte, kERROR_BYTE_PARAMETER_OUTSIDE_LIMIT))
 		{
-			printf ((far rom char *)"!6 Err: Invalid paramter value\r\n");
+			printf ((far rom char *)"!6 Err: Invalid parameter value\r\n");
 		}
 		if (bittst (error_byte, kERROR_BYTE_EXTRA_CHARACTERS))
 		{
-			printf ((far rom char *)"!7 Err: Extra parmater\r\n");
+			printf ((far rom char *)"!7 Err: Extra parameter\r\n");
 		}
 		error_byte = 0;
 	}
@@ -1599,8 +1599,8 @@ void parse_R_packet(void)
 }
 
 // CU is "Configure UBW" and controls system-wide configuration values
-// "CU,<parameter_number>,<paramter_value><CR>"
-// <paramter_number>	<parameter_value>
+// "CU,<parameter_number>,<parameter_value><CR>"
+// <parameter_number>	<parameter_value>
 // 1					{1|0} turns on or off the 'ack' ("OK" at end of packets)
 void parse_CU_packet(void)
 {
@@ -2913,7 +2913,7 @@ void parse_PC_packet (void)
 // interval.
 //
 // Usage:
-// PG,1<CR>		Start pulses, or load latest set of paramters and use them
+// PG,1<CR>		Start pulses, or load latest set of parameters and use them
 // PG,0<CR>		Stop pulses
 void parse_PG_packet (void)
 {