kopia lustrzana https://github.com/alanesq/esp32cam-demo
Update README.md
rodzic
fa754dacd0
commit
88109a0c90
10
README.md
10
README.md
|
@ -90,10 +90,12 @@ as data (http://x.x.x.x/rgb).
|
|||
|
||||
GPIO PINS:
|
||||
<br>The available pins are very limited on the esp32cam, my best understanding is:
|
||||
<br>If using the sd card (must be in 1-bit mode) the main io pins available for general use are 13 and 12 (12 must not be high at boot),
|
||||
14, 2 & 15 should also be available if you are not using the SD Card.
|
||||
<br>You can also use pins 1 and 3 if you do not use Serial. Pin 4 is the onboard flash LED which you could remove and use this pin for i/o
|
||||
(but again sd card must be in 1-bit mode if using the sd card)?
|
||||
<br>If using the sd card (must be in 1-bit mode) the main io pins available for general use are 13 and 12
|
||||
<br>(12 must not be high at boot), 14, 2 & 15 should also be available if you are not using the SD Card.
|
||||
<br>You can also use pins 1 and 3 if you do not use Serial.
|
||||
<br>Pin 4 is the onboard flash LED which you could possibly remove and use this pin for i/o but again sd card
|
||||
<br>needs to be in 1-bit mode if you are using it otherwise the sd-card uses pin 4. pin 33 is another onboard
|
||||
<br>led which could possibly be used?
|
||||
<br>More info: https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/
|
||||
<br>BTW-You can use an MCP23017 io expander chip on pins 12 and 13 to give you 16 general purpose gpio pins, this requires the adafruit MCP23017 library to be installed.
|
||||
<br>Pin 16 is used for psram but you may get away with using it as input for a button etc.?
|
||||
|
|
Ładowanie…
Reference in New Issue