diff --git a/README.md b/README.md
index 40ebb13..f22d1f3 100644
--- a/README.md
+++ b/README.md
@@ -95,19 +95,20 @@ as data (http://x.x.x.x/rgb).
resolution images as there is not enough memory)
GPIO PINS:
-
The available pins are very limited on the esp32cam, my best understanding is:
-
If using the sd card (must be in 1-bit mode) the main io pins available for general use are 13 and 12
-
(12 must not be high at boot), 14, 2 & 15 should also be available if you are not using the SD Card.
-
You can also use pins 1 and 3 if you do not use Serial.
-
Pin 4 is the onboard flash LED which you could possibly remove and use this pin for i/o but again sd card
-
needs to be in 1-bit mode if you are using it otherwise the sd-card uses pin 4. pin 33 is another onboard
-
led which could possibly be used?
-
More info: https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/
+
+
13 free (used by sd card but free if using 1 bit mode)
+
12 free (must be low at boot, used by sd card but free if using 1 bit mode)
+
14 used by sd card (useable is SPI clock?)
+
2 used by sd card (useabke as SPI MISO?)
+
15 used by sd card (might be usable as SPI CS??)
+
1 serial - output only?
+
3 serial - input only?
+
4 has the illumination/flash led on it - led could be removed and use as output?
+
33 onboard led - possibly remove led and use as gpio?
+
Some great info here: https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/docs/esp32cam-pin-notes.md
BTW-You can use an MCP23017 io expander chip on pins 12 and 13 to give you 16 general purpose gpio pins, this requires the adafruit MCP23017 library to be installed.
-
Pin 16 is used for psram but you may get away with using it as input for a button etc.?
Note: I have been told there may be issues reading files when sd-card is in 1-bit mode, I have only used it for writing them myself.
-Some great info here: https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/docs/esp32cam-pin-notes.md
----------------