2020-09-26 14:35:13 +00:00
|
|
|
# esp32cam-demo
|
|
|
|
|
esp32cam module demo / project starting point sketch using Arduino ide
|
2020-09-26 14:38:32 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a starting point sketch for projects using the esp32cam development board with the following features
|
|
|
|
|
* web server with live video streaming
|
|
|
|
|
* sd card support (using 1bit mode to free some io pins)
|
|
|
|
|
* io pins available for use are 13, 12(must be low at boot)
|
2020-09-26 15:27:39 +00:00
|
|
|
* flash led is still available for use on pin 4 when using sd card
|
2020-09-26 14:38:32 +00:00
|
|
|
|
2020-09-26 15:27:39 +00:00
|
|
|
I found it quiet confusing trying to do much with this module and so have tried to compile everything I have learned so far in to
|
2020-09-26 14:38:32 +00:00
|
|
|
a easy to follow sketch to encourage others to have a try with these powerful and VERY affordable modules...
|
|
|
|
|
|
|
|
|
|
created using the Arduino IDE with ESP32 module installed (https://dl.espressif.com/dl/package_esp32_index.json)
|
|
|
|
|
No additional libraries required
|
|
|
|
|
|
2020-09-26 14:42:53 +00:00
|
|
|
----------------
|
|
|
|
|
|
|
|
|
|
How to use:
|
|
|
|
|
|
|
|
|
|
Enter your network details (ssid and password in to the sketch) and upload it to your esp32cam module
|
|
|
|
|
If you monitor the serial port (speed 15200) it will tell you what ip address it has been given.
|
|
|
|
|
If you now enter this ip address in to your browser you should be greated with the message "Hello from esp32cam"
|
|
|
|
|
|
|
|
|
|
If you now put /stream at the end of the url i.e. http://x.x.x.x/stream
|
|
|
|
|
It will live stream video from the camera
|
|
|
|
|
|
|
|
|
|
If you have an sd card inserted then accessing http://x/x/x/x/photo
|
|
|
|
|
Will capture an image and save it to the sd card
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
----------------
|
