Updated Compatible boards (markdown)

Compatible-boards.md

@@ -2,12 +2,13 @@
 All work was done on ESP32-WROOM with custom made **RA-01**/**SX1278** LoRa shield, Arduino Board is "ESP32 Dev Module".
 
 # Supported LoRa and other module types
-Supported modules - modules, which are supported by [RadioLib](https://github.com/jgromes/RadioLib):
+If using arduino-LoRa library then supported modules are SX1276/77/78/79.
+
+If using RadioLib then supported modules - modules, which are supported by [RadioLib](https://github.com/jgromes/RadioLib):
 - `SX1278` is a default module, for other `SX127x` modules need to modify module declarations in `loraprs_service.cpp` and `loraprs_service.h`
 - `SX126x` is using `DIO1` pin for ISR instead of `DIO0`, compilation might fail and need manual rename `clearDio0Action` and `setDio0Action` to `clearDio1Action` and `setDio1Action`
-- other RadioLib module types - check RadioLib documentation, modify code accordingly
+- other RadioLib module types - check [RadioLib documentation](https://github.com/jgromes/RadioLib/wiki/Modules), modify code accordingly, open Issue if help needed
 
-If using arduino-LoRa library then supported modules are SX1276/77/78/79.
 
 If your ESP32 board is compatible or has build in LoRa module then it should work without redefining pinouts, for custom shields there might be need to redefine pinouts to LoRa module if it differs (see further description in Software Setup section), currently pinouts are connected from LoRa to ESP32-WROOM as (SS/RST/DIO0 could be redefined in config.h):