kopia lustrzana https://github.com/sh123/esp32_loraprs
Updated Home (markdown)
rodzic
57f365f128
commit
6168c001eb
2
Home.md
2
Home.md
|
@ -11,7 +11,7 @@ Can be used in two modes, mode seleciton is done by changing `cfg.IsClientMode`
|
|||
- it is also possible to use **other KISS APRS clients** over Bluetooth serial, just use `rfcomm` on Linux to setup serial over Bluetooth and put up AX25 interface with `kissattach`, then use any existing Linux APRS clients, such as `xastir`, see section below for alternative Linux usage
|
||||
- Different transports could be used:
|
||||
- *Bluetooth*, enabled when `cfg.BtName/CFG_BT_NAME` is not empty
|
||||
- *BLE*, enabled when `cfg.BtEnableBle/CFG_BT_USE_BLE` is set to `true`
|
||||
- *BLE*, enabled when `cfg.BtEnableBle/CFG_BT_USE_BLE` is set to `true`, mode needs to be used with iOS applications, such as official aprs.fi APRS iOS client
|
||||
- *USB*, enabled when `cfg.UsbSerialEnable/CFG_USB_SERIAL_ENABLE` is set to `true`
|
||||
- *TCPIP*, enabld when `cfg.KissEnableTcpIp/CFG_KISS_TCP_IP` is set to `true`
|
||||
- **LoRa APRS iGate RX/TX server over WiFi + Digipeater**, stationary usage at home
|
||||
|
|
Ładowanie…
Reference in New Issue