kopia lustrzana https://github.com/sh123/esp32_loraprs
Updated Compatible boards (markdown)
rodzic
700c27af59
commit
5aed0154ac
|
@ -7,7 +7,7 @@ If using arduino-LoRa library then supported modules are SX1276/77/78/79.
|
|||
If using RadioLib then supported modules - modules, which are supported by [RadioLib](https://github.com/jgromes/RadioLib/wiki/Modules):
|
||||
- `SX1278` is a default module, for other `SX127x` modules need to modify module declarations in `loraprs_service.cpp` and `loraprs_service.h`
|
||||
- `SX126x` is using `DIO1` pin for ISR instead of `DIO0`, compilation might fail and need manual rename `clearDio0Action` and `setDio0Action` to `clearDio1Action` and `setDio1Action`
|
||||
- other RadioLib module types - check [RadioLib documentation](https://github.com/jgromes/RadioLib/wiki/Modules), modify code accordingly, open Issue if help needed
|
||||
- other RadioLib module types - check [RadioLib documentation](https://github.com/jgromes/RadioLib/wiki/Modules), modify code accordingly, open Issue if help is needed
|
||||
|
||||
|
||||
If your ESP32 board is compatible or has build in LoRa module then it should work without redefining pinouts, for custom shields there might be need to redefine pinouts to LoRa module if it differs (see further description in Software Setup section), currently pinouts are connected from LoRa to ESP32-WROOM as (SS/RST/DIO0 could be redefined in config.h):
|
||||
|
|
Ładowanie…
Reference in New Issue