kopia lustrzana https://github.com/sh123/esp32_loraprs
Updated Compatible boards (markdown)
rodzic
8cbfb0df09
commit
1274d08c89
|
@ -3,10 +3,10 @@ All work was done on ESP32-WROOM with custom made **RA-01**/**SX1278** LoRa shie
|
|||
|
||||
# Supported LoRa and other module types
|
||||
If using **RadioLib** then supported modules - modules, which are supported by [RadioLib](https://github.com/jgromes/RadioLib/wiki/Modules):
|
||||
- **SX1278** is a default module, for other `SX127x` modules need to update `module_name.h`, replace `MODULE_NAME` with your module name
|
||||
- **SX1278** is a default module, for other `SX127x` modules need to update `config.h`, replace `MODULE_NAME` with your module name
|
||||
according to RadioLib naming
|
||||
- **SX1268** is used when `USE_SX126X` is enabled in `module_name.h`, for other `SX126x` modules need to set corresponding `MODULE_NAME` in `module_name.h`
|
||||
- other RadioLib module types - check [RadioLib documentation](https://github.com/jgromes/RadioLib/wiki/Modules), modify `module_name.h` and code accordingly, open Issue if help is needed, most likely it will not compile out of the box and some changes are needed.
|
||||
- **SX1268** is used when `USE_SX126X` is enabled in `module_name.h`, for other `SX126x` modules need to set corresponding `MODULE_NAME` in `config.h`
|
||||
- other RadioLib module types - check [RadioLib documentation](https://github.com/jgromes/RadioLib/wiki/Modules), modify `config.h` and code accordingly, open Issue if help is needed, most likely it will not compile out of the box and some changes are needed.
|
||||
|
||||
If using **arduino-LoRa** library then supported modules are **SX1276/77/78/79**.
|
||||
|
||||
|
|
Ładowanie…
Reference in New Issue