kopia lustrzana https://github.com/sh123/esp32_loraprs
Updated Home (markdown)
rodzic
8c7a864ac1
commit
0debc0cc7a
2
Home.md
2
Home.md
|
@ -5,7 +5,7 @@ Amateur radio ESP32 based LoRa KISS Bluetooth/BLE/USB/TCPIP modem + APRS-IS RX/T
|
|||
|
||||
# Features
|
||||
Can be used in two modes, mode seleciton is done by changing `cfg.IsClientMode` or `CFG_IS_CLIENT_MODE` define in `config.h`:
|
||||
- **LoRa APRS KISS client over bluetooth**, WiFi and iGate are switched off, mobile or portable usage (/M, /P)
|
||||
- **LoRa APRS KISS client over Bluetooth/BLE/USB/TCPIP**, WiFi and iGate are switched off, mobile or portable usage (/M, /P)
|
||||
- you need to use **APRSDroid** application (https://aprsdroid.org) or iOS aprs.fi official application, connect to the modem using bluetooth, data will be re-transmitted through the LoRa radio, this is similar to APRSDroid micromodem - https://unsigned.io/micromodem/, received data will be sent back to the APRSDroid using bluetooth
|
||||
- by having two APRSDroid clients you can not only send your position, but also **send and receive APRS messages**
|
||||
- it is also possible to use **other KISS APRS clients** over Bluetooth serial, just use `rfcomm` on Linux to setup serial over Bluetooth and put up AX25 interface with `kissattach`, then use any existing Linux APRS clients, such as `xastir`, see section below for alternative Linux usage
|
||||
|
|
Ładowanie…
Reference in New Issue