From 02854728a3e7f19dcb0e12f1333abcf358a20720 Mon Sep 17 00:00:00 2001 From: sh123 Date: Sat, 23 Oct 2021 13:51:24 +0300 Subject: [PATCH] Updated Home (markdown) --- Home.md | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Home.md b/Home.md index 3e0bd63..25969e5 100644 --- a/Home.md +++ b/Home.md @@ -14,13 +14,13 @@ Amateur radio ESP32 based LoRa KISS Bluetooth/BLE/USB/TCPIP modem + APRS-IS RX/T # Transport selection - Transport selection - - *Bluetooth*, enabled when `cfg.BtName/CFG_BT_NAME` is not empty - - *BLE*, enabled when `cfg.BtEnableBle/CFG_BT_USE_BLE` is set to `true`, mode needs to be used with iOS applications, such as official aprs.fi APRS iOS client - - *USB*, enabled when `cfg.UsbSerialEnable/CFG_USB_SERIAL_ENABLE` is set to `true` - - *TCPIP*, enabled when `cfg.KissEnableTcpIp/CFG_KISS_TCP_IP` is set to `true` - - WiFi client/STA mode, activated when `cfg.WifiEnableAp/CFG_WIFI_ENABLE_AP` is set to `false` - - Can operate in WiFi AP mode, activated when `cfg.WifiEnableAp/CFG_WIFI_ENABLE_AP` is set to `true` + - **Bluetooth**, enabled when `cfg.BtName/CFG_BT_NAME` is not empty + - **BLE**, enabled when `cfg.BtEnableBle/CFG_BT_USE_BLE` is set to `true`, mode needs to be used with iOS applications, such as official aprs.fi APRS iOS client + - **USB**, enabled when `cfg.UsbSerialEnable/CFG_USB_SERIAL_ENABLE` is set to `true` + - **TCPIP**, enabled when `cfg.KissEnableTcpIp/CFG_KISS_TCP_IP` is set to `true` + - *WiFi client/STA mode*, activated when `cfg.WifiEnableAp/CFG_WIFI_ENABLE_AP` is set to `false` + - Can operate in *WiFi AP mode*, activated when `cfg.WifiEnableAp/CFG_WIFI_ENABLE_AP` is set to `true` -# Voice over LoRa +# Voice over LoRa (VoLoRa) Modem could also be used for **LoRa Codec2 digital voice DV communication** - just install [Codec2 Walkie-Talkie](https://github.com/sh123/codec2_talkie) on you Android phone, pair with the modem and you can communicate with each other by using digital voice [Codec2](http://www.rowetel.com/?page_id=452), also modem can be controlled from this application (frequency change, bandwidth, spreading factor, etc)