ESP32 LoRa APRS Modem

amateur-radio aprs aprs-rx aprs-tracker aprsdroid aprsis codec2 esp32 esp32-ardunio esp32-library ham-radio iot kiss lora lora-gateway lora-server lorawan tnc tracker uhf

Go to file

sh123 a3cde349c1 Add support for split operation		2022-03-11 21:30:50 +02:00
cad	Added readme	2022-02-03 11:00:37 +02:00
images	Added images	2022-02-03 10:39:16 +02:00
schematics	Update README.md	2022-02-03 10:59:55 +02:00
.gitignore	Uses SX1268 (#28 )	2021-11-10 08:59:34 +02:00
LICENSE	Create LICENSE	2020-06-24 15:14:52 +03:00
README.md	Update README.md	2022-02-03 10:59:13 +02:00
ax25_callsign.cpp	Small refactoring	2020-06-19 10:39:49 +03:00
ax25_callsign.h	Small refactoring	2021-02-02 11:22:38 +02:00
ax25_payload.cpp	Add configuration flag to allow text aprs messaging	2021-10-26 12:01:14 +03:00
ax25_payload.h	Add configuration flag to allow text aprs messaging	2021-10-26 12:01:14 +03:00
ble_serial.cpp	Add support for USB-OTG operation and improve logging (#25 )	2021-10-22 22:09:17 +03:00
ble_serial.h	Add support for USB-OTG operation and improve logging (#25 )	2021-10-22 22:09:17 +03:00
config.h	Add support for split operation	2022-03-11 21:30:50 +02:00
esp32_loraprs.ino	Add support for split operation	2022-03-11 21:30:50 +02:00
kiss_processor.cpp	Logging	2021-10-26 16:36:16 +03:00
kiss_processor.h	Add ability to disable KISS and run in TNC2 mode	2021-10-26 13:09:43 +03:00
loraprs_config.h	Add support for split operation	2022-03-11 21:30:50 +02:00
loraprs_service.cpp	Add support for split operation	2022-03-11 21:30:50 +02:00
loraprs_service.h	Add support for split operation	2022-03-11 21:30:50 +02:00

README.md

ESP32 LoRa APRS Modem

This project is amateur radio ESP32 based LoRa KISS Bluetooth/BLE/USB/TCPIP modem + LoRa APRS-IS RX/TX iGate server over WiFI + LoRa APRS digipeater + Codec2 DV modem (with Codec2 Talkie Android application).

⚠ To configure sketch modify default parameters in config.h file.

For project description, detailed setup and more information, please, visit our Wiki at https://github.com/sh123/esp32_loraprs/wiki
For discussions, visit https://github.com/sh123/esp32_loraprs/discussions

⚠ Project also supports APRSDroid TNC2 text APRS packet mode (configurable), which makes it interoperable with other LoRa APRS trackers without AX25 support.

Supported module types: SX126X, SX127X and other modules supported by RadioLib.

Modules, which are used by users and known to work

SX126X (suggested, 1W modules will provide decent coverage for APRS, stable frequency suitable for < 125 kHz BW at 433 MHz, 5V from USB power bank is enough to power it, have additional LNA)
- E22-400M30S (SX1268)
- E220-400M30S (LLCC68) BW125 SF from 7 to 9 (chip limitations)
SX127X (low power)
- RA-01 (SX1278)
- RA-02 (SX1276)
- TTGO T-Beam (SX1276)

Dependencies

Install via libraries:

Arduino ESP32 library: https://github.com/espressif/arduino-esp32
LoRa library
- RadioLib library (⚠use github master version): https://github.com/jgromes/RadioLib
- or LoRa Arduino library: https://github.com/sandeepmistry/arduino-LoRa
Arduino Timer library: https://github.com/contrem/arduino-timer
CircularBuffer library: https://github.com/rlogiacco/CircularBuffer
DebugLog library: https://github.com/hideakitai/DebugLog

Development board

Development board schematics, case and antenna models are available under cad and schematics.