Fixed bux #1 and other stuff to make it works (tested on 2 heltec wireless stick lite v3)

include/config.h

@@ -3,6 +3,7 @@
 
 // Uncomment for SX126X module usage
 // #define USE_SX126X
+// #define WIFI_LoRa_32_V3
 
 // Check your module name at https://github.com/jgromes/RadioLib/wiki/Modules
 #ifdef USE_SX126X
@@ -30,16 +31,16 @@
 #endif
 
 // Support for heltec_wifi_lora_32_V3 board
-// https://github.com/espressif/arduino-esp32/blob/master/variants/heltec_wifi_lora_32_V3/pins_arduino.h
-// static const uint8_t RST_LoRa = 12;
-// static const uint8_t BUSY_LoRa = 13;
-// static const uint8_t DIO0 = 14;
+// https://github.com/espressif/arduino-esp32/blob/master/variants/heltec_wireless_stick_lite_v3/pins_arduino.h
+//static const uint8_t RST_LoRa = 12;
+//static const uint8_t BUSY_LoRa = 13;
+//static const uint8_t DIO1 = 14;
 
 
 
 #ifdef WIFI_LoRa_32_V3
     #define LORA_RST              RST_LoRa //OK
-    #define LORA_IRQ              14       //schematic:dio1  include: dio0. Follow schematic ???? 
+    #define LORA_IRQ              14        
     #define LED_BUILTIN           35
     #define BUILTIN_LED           35
 #endif
@@ -53,18 +54,19 @@
 #endif
 
 // LoRa pinouts
-#define CFG_LORA_PIN_SS       SS
 #define CFG_LORA_PIN_RST      LORA_RST
 #define CFG_LORA_PIN_A        LORA_IRQ    // (sx127x - dio0, sx126x/sx128x - dio1)
 #ifdef USE_SX126X
     #ifdef WIFI_LoRa_32_V3
-        #define CFG_LORA_PIN_B        BUSY_LoRa          // (sx1262 - busy)
-        #define CFG_LORA_PIN_RXEN     RADIOLIB_NC                // (sx1262 unused)
-        #define CFG_LORA_PIN_TXEN     RADIOLIB_NC                // (sx1262 unused)
+        #define CFG_LORA_PIN_B        BUSY_LoRa          
+        #define CFG_LORA_PIN_RXEN     RADIOLIB_NC        // (sx1262 unused)
+        #define CFG_LORA_PIN_TXEN     RADIOLIB_NC       // (sx1262 unused)
+        #define CFG_LORA_PIN_SS       8       // NSS_LoRa
     #else
         #define CFG_LORA_PIN_B        14          // (sx127x - dio1, sx126x/sx128x - busy)
         #define CFG_LORA_PIN_RXEN     32          // (sx127x - unused, sx126x - RXEN pin number)
         #define CFG_LORA_PIN_TXEN     33          // (sx127x - unused, sx126x - TXEN pin number)
+        #define CFG_LORA_PIN_SS       SS
     #endif
 #else
 #define CFG_LORA_PIN_B        RADIOLIB_NC
@@ -122,7 +124,7 @@
 #define CFG_USB_SERIAL_ENABLE false       // true - enable KISS communication over USB Serial (e.g. with APRSDroid over USB-OTG), disables USB logging
 
 // KISS protocol options
-#define CFG_KISS_EXTENSIONS   false   // true - enable modem control from application with KISS commands and signal reports
+#define CFG_KISS_EXTENSIONS   true   // true - enable modem control from application with KISS commands and signal reports
 #define CFG_KISS_TCP_IP       false   // true - run as KISS TCP/IP server, no bluetooth operations performed
 
 // APRS-IS options, valid in when CFG_IS_CLIENT_MODE = false

platformio.ini

@@ -15,7 +15,6 @@ lib_deps =
   jgromes/RadioLib @ 6.2.0
   rlogiacco/CircularBuffer @ 1.3.3
   h2zero/NimBLE-Arduino @1.4.1
-# afpineda/NuS-NimBLE-Serial @ 3.0.1
 
 check_tool = cppcheck
 check_flags =
@@ -80,6 +79,7 @@ build_flags =
    -D USE_SX126X
    -D CFG_BT_USE_BLE=true
    -D USE_NIMBLE
+   -D WIFI_LoRa_32_V3
 
 [env:heltec-lora32-v3_igate]
 lib_ignore =
@@ -92,4 +92,5 @@ build_flags =
    -D CFG_IS_CLIENT_MODE=false
    -D USE_SX126X
    -D CFG_BT_USE_BLE=true
-   -D USE_NIMBLE
+   -D USE_NIMBLE
+   -D WIFI_LoRa_32_V3

src/loraprs_service.cpp

@@ -247,8 +247,13 @@ void Service::setupRig(long loraFreq, long bw, int sf, int cr, int pwr, int sync
   }
   rig_->setCRC(crcBytes);
   rig_->setPreambleLength(config_.LoraPreamble);
-#ifdef USE_SX126X
-    #pragma message("Using SX126X")
+#if defined(USE_SX126X) && MODULE_NAME == SX1262
+    #pragma message("Using SX1262")
+    LOG_INFO("Using SX1262 module");
+    if (isIsrInstalled_) rig_->clearDio1Action();
+    rig_->setDio1Action(onRigIsrRxPacket);
+    isIsrInstalled_ = true;
+#elif defined(USE_SX126X)
     LOG_INFO("Using SX126X module");
     rig_->setRfSwitchPins(config_.LoraPinSwitchRx, config_.LoraPinSwitchTx);
     if (isIsrInstalled_) rig_->clearDio1Action();
@@ -290,13 +295,22 @@ void Service::setupRigFsk(long freq, float bitRate, float freqDev, float rxBw, i
     LOG_ERROR("Radio start error:", state);
   }
   rig_->disableAddressFiltering();
-#ifdef USE_SX126X
+
+  #if defined(USE_SX126X) && MODULE_NAME == SX1262
+    #pragma message("Using SX1262")
+    LOG_INFO("Using SX1262 module");
+    if (isIsrInstalled_) rig_->clearDio1Action();
+    rig_->setDio1Action(onRigIsrRxPacket);
+    isIsrInstalled_ = true;
+
+#elif defined(USE_SX126X)
     #pragma message("Using SX126X")
     LOG_INFO("Using SX126X module");
     rig_->setRfSwitchPins(config_.LoraPinSwitchRx, config_.LoraPinSwitchTx);
     if (isIsrInstalled_) rig_->clearDio1Action();
     rig_->setDio1Action(onRigIsrRxPacket);
     isIsrInstalled_ = true;
+
 #else
     #pragma message("Using SX127X")
     LOG_INFO("Using SX127X module");