mirror
/
esp32_loraprs
kopia lustrzana https://github.com/sh123/esp32_loraprs
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

pull/5/head
sh123 2019-11-08 23:22:33 +02:00 zatwierdzone przez GitHub
rodzic 11f0ed143d
commit d7c084f3cd
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 1 dodań i 1 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
README.md
Wyświetl plik

@ -30,7 +30,7 @@ Can be used in two modes:
- lora output power **CfgPower**, 20 (max 20 dBm ~ 100mW, change to lower value if needed)
- use 80 MHz ESP32 frequency in Arduino, it will prolong battery life when operating portable, higher CPU speed is not required, there are no CPU intensive operations
- uses LoRa **built-in checksum** calculation to drop broken packets
- note, that there a is **significant frequency drift** on temperature changes for different modules, you need to use **external TXCO** if you are planning to use modules for narrow bandwidths less than 125 kHz or calibrate clients based on server frequency drift report by changing **LORAPRS_FREQ**, which is OK for experiments
- note, that there a is **significant frequency drift** on temperature changes for different modules, you need to use **external TCXO** if you are planning to use modules for narrow bandwidths less than 125 kHz or calibrate clients based on server frequency drift report by changing **LORAPRS_FREQ**, which is OK for experiments
# Test Results
- Antennas