Update README.md

README.md

@@ -53,7 +53,8 @@ Install via libraries:
 - cppQueue library: https://github.com/SMFSW/Queue
 
 # Software Setup
-- **NB! select next partition scheme for esp32 in Arduino IDE Tools menu:** "Minimal SPIFFS (1.9 MB APP with OTA/190 KB SPIFFS)"
+- **nb! select next partition scheme for esp32 in Arduino IDE Tools menu:** "Minimal SPIFFS (1.9 MB APP with OTA/190 KB SPIFFS)"
+- **use 80 MHz ESP32 frequency** in Arduino SDK, it will prolong battery life when operating portable, higher CPU speed is not required, there are no CPU intensive operations
 - when setting up APRSDroid, use **"TNC (KISS)"** connection protocol in Connection Preferences -> Connection Protocol
 - go to esp32_loraprs.ino and make next changes based on your requirements in `initializeConfig()`
   - set `cfg.IsClientMode` to `false` if you are planning to run server mode for APRS-IS iGate / Digipeater
@@ -72,7 +73,6 @@ Install via libraries:
   - lora output power `cfg.LoraPower`, 20 (max 20 dBm ~ 100mW, change to lower value if needed)
   - sync word `cfg.LoraSync`, 0x34
 - consider minimum decode level based on on BW + SF and required throughput ![alt text](images/bandwidth_vs_sf.jpg)
-- use 80 MHz ESP32 frequency in Arduino SDK, it will prolong battery life when operating portable, higher CPU speed is not required, there are no CPU intensive operations
 - uses LoRa **built-in checksum** calculation to drop broken packets
 - note, that there a is **significant frequency drift** on temperature changes for different modules
   - you need to use **external TCXO** if you are planning to use modules for narrow bandwidths less than 125 kHz