kopia lustrzana https://github.com/sh123/esp32_loraprs
Update README.md
rodzic
065673e340
commit
5123746d70
10
README.md
10
README.md
|
@ -1,9 +1,9 @@
|
||||||
# Experimental LoRA APRS ESP32 APRSDroid bluetooth modem and LoRA APRS-IS iGate
|
# Experimental LoRA APRS ESP32 APRSDroid bluetooth modem and LoRA APRS-IS iGate
|
||||||
Tiny experimental amateur radio esp32 based LoRA (RA-01) APRSDroid bluetooth modem and iGate server.
|
Tiny experimental amateur radio esp32 based LoRa APRSDroid bluetooth modem and iGate server.
|
||||||
|
|
||||||
Can be used in two modes:
|
Can be used in two modes:
|
||||||
- as a client, where you need to use APRSDroid application, connect to the modem using bluetooth, data will be re-transmitted through the LoRA radio, this is similar to APRSDroid micromodem - https://unsigned.io/micromodem/, received data will be sent back to the APRSDroid using bluetooth
|
- **as LoRa APRS client**, you need to use APRSDroid application, connect to the modem using bluetooth, data will be re-transmitted through the LoRA radio, this is similar to APRSDroid micromodem - https://unsigned.io/micromodem/, received data will be sent back to the APRSDroid using bluetooth
|
||||||
- as a iGate server, which connects to your WiFI and forwards received LoRA APRS positions into the APRS-IS network, it also reports client signal level, by appending it into the APRS comment
|
- **as a LoRa APRS iGate server**, which connects to your WiFI and forwards received LoRA APRS positions into the APRS-IS network, it also reports client signal level, by appending it into the APRS comment
|
||||||
|
|
||||||
# Software Dependencies
|
# Software Dependencies
|
||||||
- espressif/arduino-esp32 library (install using arduino library manager)
|
- espressif/arduino-esp32 library (install using arduino library manager)
|
||||||
|
@ -27,7 +27,7 @@ Can be used in two modes:
|
||||||
- use 80 MHz ESP32 frequency in Arduino, it will prolong battery life when operating portable, higher speed is not needed
|
- use 80 MHz ESP32 frequency in Arduino, it will prolong battery life when operating portable, higher speed is not needed
|
||||||
|
|
||||||
# Test Results
|
# Test Results
|
||||||
- About 4 km when server is 30m above the ground and client is 2m above the ground
|
- **About 4 km** when server is 30m above the ground and client is 2m above the ground
|
||||||
- About 13 km when server is 30m above the ground and client is at some higher point ~40m above the ground
|
- **About 13 km** when server is 30m above the ground and client is at some higher point ~40m above the ground
|
||||||
|
|
||||||
# Hardware Photos
|
# Hardware Photos
|
||||||
|
|
Ładowanie…
Reference in New Issue