kopia lustrzana https://github.com/sh123/esp32_loraprs
Update README.md
rodzic
1e1fcd277d
commit
407da0a4ba
|
@ -16,14 +16,15 @@ Can be used in two modes:
|
|||
- for server mode fill LORAPRS_WIFI_SSID and LORAPRS_WIFI_KEY with your WiFI AP data
|
||||
- for server mode fill LORAPRS_LOGIN and LORAPRS_PASS with APRS-IS login callsign and pass
|
||||
- change LORAPRS_FREQ if you are planning to use different frequency, currently it is set to **432.500MHz**, which is 70cm band APRS frequency in IARU-1 region, see http://info.aprs.net/index.php?title=Frequencies
|
||||
- if you are planning to use different esp32 pinouts for lora and/or different LoRA spread factor / bandwidth then modify loraprs.h
|
||||
- if you are planning to use different esp32 pinouts then modify loraprs.h
|
||||
- lora module CfgPinSs, pin 5
|
||||
- lora module CfgPinRst, pin 26
|
||||
- lora module CfgPinDio0, pin 14
|
||||
- if you are planning to experiment with different bandwidths/spread factors then modify loraprs.h
|
||||
- lora bandwidth CfgBw, 20 kHz (to fit into standard 25 kHz channel)
|
||||
- lora spread factor CfgSpread, 11 (down to -17.5dB)
|
||||
- lora spread factor CfgSpread, 11 (should decode down to -17.5dB)
|
||||
- lora coding rate CfgCodingRate, 7
|
||||
- lora output power CfgPower, 20 (set to maximum 20 dBm ~ 100mW, change to lower value if needed)
|
||||
- lora output power CfgPower, 20 (max 20 dBm ~ 100mW, change to lower value if needed)
|
||||
- use 80 MHz ESP32 frequency in Arduino, it will prolong battery life when operating portable, higher CPU speed is not required, there are no CPU intensive operations
|
||||
|
||||
# Test Results
|
||||
|
|
Ładowanie…
Reference in New Issue