Merge branch 'master' of https://github.com/sh123/esp32_loraprs

README.md

@@ -13,10 +13,10 @@ This project is amateur radio ESP32 based LoRa **KISS Bluetooth/BLE/USB/TCPIP**
 Supported module types: **SX126X**, **SX127X** and other modules supported by RadioLib.
 
 Modules, which are used by users and known to work
-- **SX126X** (**suggested**, 1W modules will provide decent coverage for APRS, stable frequency suitable for < 125 kHz BW at 433 MHz, 5V from USB power bank is enough to power it, have additional LNA)
-  - E22-400M30S (SX1268)
+- **SX126X** (**suggested**, 1W modules will provide decent coverage for APRS, stable frequency suitable for < 125 kHz BW at 433 MHz, 5V from USB power bank is enough to power it, has additional LNA)
+  - &#128077; **E22-400M30S (SX1268)**
   - E220-400M30S (LLCC68) BW125 SF from 7 to 9 (chip limitations)
-- **SX127X** (low power)
+- **SX127X** (low power, 50-100mW, temperature frequency drift, problematic for narrow band)
   - RA-01 (SX1278)
   - RA-02 (SX1276)
   - TTGO T-Beam (SX1276)

cad/README.md

@@ -1 +1,11 @@
+# FreeCAD tracker models
 
+**Rubber duck antenna**:
+- `antenna_base` - base for rubber duck antenna, to be printed with PETG filament.
+- `antenna_cover` - cover for rubber duck antenna, to printed with TPU filament.
+
+👉 Rubber duck antenna spiral widing was done with 1.3mm copper wire on 8mm aluminium scaffolding tube.
+
+**Tracker case**:
+- `aprs_tracker_e22_v2` - base for tracker case.
+- `aprs_tracker_e22_cover_v2` - upper cover for tracker case.

schematics/README.md

@@ -3,6 +3,4 @@
 
 This is small universal ESP32 devkit LoRa prototyping board for RA-01 or E22-400M30S modules on the same board. Suitable for two different ESP32 devkit types with different pinouts. Pinout configuration is done via solder pads.
 
-To be used with firmware from https://github.com/sh123/esp32_loraprs or others.
-
 ![Board](../images/board.png)